Massive multiple-input multiple-output MIMO is one of themost promising technologies for the next generation of wirelesscommunication networks because it has the potential to providegame-changing improvements in spectral efficiency SE and energyefficiency EE. This monograph summarizes many years ofresearch insights in a clear and self-contained way and providesthe reader with the necessary knowledge and mathematical toolsto carry out independent research in this area. Starting froma rigorous definition of Massive MIMO, the monograph coversthe important aspects of channel estimation, SE, EE, hardwareefficiency HE, and various practical deployment considerations.From the beginning, a very general, yet tractable, canonical systemmodel with spatial channel correlation is introduced. This modelis used to realistically assess the SE and EE, and is later extendedto also include the impact of hardware impairments. Owing tothis rigorous modeling approach, a lot of classic "wisdom" aboutMassive MIMO, based on too simplistic system models, is shownto be questionable.

https://www.nowpublishers.com/article/DownloadSummary/SIG-093

Massive MIMO Networks: Spectral, Energy, and Hardware Efficiency

Millimeter wave (mmWave) MIMO will likely use hybrid analog and digital precoding, which uses a small number of RF chains to reduce the energy consumption associated with mixed signal components like analog-to-digital components not to mention baseband processing complexity. However, most hybrid precoding techniques consider a fully connected architecture requiring a large number of phase shifters, which is also energy-intensive. In this paper, we focus on the more energy-efficient hybrid precoding with subconnected architecture, and propose a successive interference cancelation (SIC)-based hybrid precoding with near-optimal performance and low complexity. Inspired by the idea of SIC for multiuser signal detection, we first propose to decompose the total achievable rate optimization problem with nonconvex constraints into a series of simple subrate optimization problems, each of which only considers one subantenna array. Then, we prove that maximizing the achievable subrate of each subantenna array is equivalent to simply seeking a precoding vector sufficiently close (in terms of Euclidean distance) to the unconstrained optimal solution. Finally, we propose a low-complexity algorithm to realize SIC-based hybrid precoding, which can avoid the need for the singular value decomposition (SVD) and matrix inversion. Complexity evaluation shows that the complexity of SIC-based hybrid precoding is only about 10% as complex as that of the recently proposed spatially sparse precoding in typical mmWave MIMO systems. Simulation results verify that SIC-based hybrid precoding is near-optimal and enjoys higher energy efficiency than the spatially sparse precoding and the fully digital precoding.

Energy-Efficient Hybrid Analog and Digital Precoding for MmWave MIMO Systems With Large Antenna Arrays

Millimeter wave (mmWave) MIMO will likely use hybrid analog and digital precoding, which uses a small number of RF chains to avoid energy consumption associated with mixed signal components like analog-to-digital components not to mention baseband processing complexity. However, most hybrid precoding techniques consider a fully-connected architecture requiring a large number of phase shifters, which is also energyintensive. In this paper, we focus on the more energy-efficient hybrid precoding with sub-connected architecture, and propose a successive interference cancelation (SIC)-based hybrid precoding with near-optimal performance and low complexity. Inspired by the idea of SIC for multi-user signal detection, we first propose to decompose the total achievable rate optimization problem with non-convex constraints into a series of simple sub-rate optimization problems, each of which only considers one sub-antenna array. Then, we prove that maximizing the achievable sub-rate of each sub-antenna array is equivalent to simply seeking a precoding vector sufficiently close (in terms of Euclidean distance) to the unconstrained optimal solution. Finally, we propose a low-complexity algorithm to realize SICbased hybrid precoding, which can avoid the need for the singular value decomposition (SVD) and matrix inversion. Complexity evaluation shows that the complexity of SIC-based hybrid precoding is only about 10% as complex as that of the recently proposed spatially sparse precoding in typical mmWave MIMO systems. Simulation results verify the near-optimal performance of SIC-based hybrid precoding.

Energy-Efficient Hybrid Analog and Digital Precoding for mmWave MIMO Systems with Large Antenna Arrays

The emerging massive/large-scale multiple-input multiple-output (LS-MIMO) systems that rely on very large antenna arrays have become a hot topic of wireless communications. Compared to multi-antenna aided systems being built at the time of this writing, such as the long-term evolution (LTE) based fourth generation (4G) mobile communication system which allows for up to eight antenna elements at the base station (BS), the LS-MIMO system entails an unprecedented number of antennas, say 100 or more, at the BS. The huge leap in the number of BS antennas opens the door to a new research field in communication theory, propagation and electronics, where random matrix theory begins to play a dominant role. Interestingly, LS-MIMOs also constitute a perfect example of one of the key philosophical principles of the Hegelian Dialectics, namely, that “quantitative change leads to qualitative change.” In this treatise, we provide a recital on the historic heritages and novel challenges facing LS-MIMOs from a detection perspective. First, we highlight the fundamentals of MIMO detection, including the nature of co-channel interference (CCI), the generality of the MIMO detection problem, the received signal models of both linear memoryless MIMO channels and dispersive MIMO channels exhibiting memory, as well as the complex-valued versus real-valued MIMO system models. Then, an extensive review of the representative MIMO detection methods conceived during the past 50 years (1965–2015) is presented, and relevant insights as well as lessons are inferred for the sake of designing complexity-scalable MIMO detection algorithms that are potentially applicable to LS-MIMO systems. Furthermore, we divide the LS-MIMO systems into two types, and elaborate on the distinct detection strategies suitable for each of them. The type-I LS-MIMO corresponds to the case where the number of active users is much smaller than the number of BS antennas, which is currently the mainstream definition of LS-MIMO. The type-II LS-MIMO corresponds to the case where the number of active users is comparable to the number of BS antennas. Finally, we discuss the applicability of existing MIMO detection algorithms in LS-MIMO systems, and review some of the recent advances in LS-MIMO detection.

/pdf/fifty-years-of-mimo-detection-the-road-to-large-scale-mimos-44ejto9lpw.pdf

Fifty Years of MIMO Detection: The Road to Large-Scale MIMOs

In-band full-duplex (IBFD) transmission represents an attractive option for increasing the throughput of wireless communication systems A key challenge for IBFD transmission is reducing self-interference Fortunately, the power associated with residual self-interference can be effectively canceled for feasible IBFD transmission with combinations of various advanced passive, analog, and digital self-interference cancellation schemes In this survey paper, we first review the basic concepts of IBFD transmission with shared and separated antennas and advanced self-interference cancellation schemes Furthermore, we also discuss the effects of IBFD transmission on system performance in various networks such as bidirectional, relay, and cellular topology networks This survey covers a wide array of technologies that have been proposed in the literature as feasible for IBFD transmission and evaluates the performance of the IBFD systems compared to conventional half-duplex transmission in connection with theoretical aspects such as the achievable sum rate, network capacity, system reliability, and so on We also discuss the research challenges and opportunities associated with the design and analysis of IBFD systems in a variety of network topologies This work also explores the development of MAC protocols for an IBFD system in both infrastructure-based and ad hoc networks Finally, we conclude our survey by reviewing the advantages of IBFD transmission when applied for different purposes, such as spectrum sensing, network secrecy, and wireless power transfer

A Survey of In-Band Full-Duplex Transmission: From the Perspective of PHY and MAC Layers

In LTE/LTE-A uplink receiver, frequency domain equalizers (FDE) are adopted to achieve good performance. However, in multi-tap channels, the residual inter-symbol and inter-antenna interference still exist after FDE and degrade the performance. Conventional interference cancellation schemes can minimize this interference by using frequency domain interference cancellation. However, those schemes have high complexity and large feedback latency, especially when adopting a large number of iterations. These result in low throughput and require a large amount of resource in software defined radio implementation. In this paper, we propose a novel low complexity interference cancellation scheme to minimize the residual interference in LTE/LTE-A uplink. Our proposed scheme can bring about 2 dB gains in different channels, but only adds up to 7.2 % complexity to the receiver. The scheme is further implemented on Xilinx FPGA. Compared to other conventional interference cancellation schemes, our scheme has less complexity, less data to store, and shorter feedback latency.

/pdf/lte-uplink-mimo-receiver-with-low-complexity-interference-49ljrr0cqn.pdf

LTE uplink MIMO receiver with low complexity interference cancellation

In this paper, we propose a novel opportunistic decoding scheme for network coding decoder which significantly reduces the decoder complexity and increases the throughput. Network coding was proposed to improve the network throughput and reliability, especially for multicast transmissions. Although network coding increases the network performance, the complexity of the network coding decoder algorithm is still high, especially for higher dimensional finite fields or larger network codes. Different software and hardware approaches were proposed to accelerate the decoding algorithm, but the decoder remains to be the bottleneck for high speed data transmission. We propose a novel decoding scheme which exploits the structure of the network coding matrix to reduce the network decoder complexity and improve throughput. We also implemented the proposed scheme on Virtex 7 FPGA and compared our implementation to the widely used Gaussian elimination.

/pdf/low-complexity-opportunistic-decoder-for-network-coding-2d1sa6wpii.pdf

Low complexity opportunistic decoder for network coding

This paper proposes a flexible Multiple-Input Multiple-Output (MIMO) detector on graphics processing units (GPU). MIMO detection is a key technology in broadband wireless system such as LTE, WiMAX, and 802.11n. Existing detectors either use costly sorting for better performance or sacrifice sorting for higher throughput. To achieve good performance with high though put, our detector runs multiple search passes in parallel, where each search pass detects the transmit stream with a different permuted detection order. We show that this flexible detector, including QR decomposition preprocessing, outperforms existing GPU MIMO detectors while maintaining good bit error rate (BER) performance. In addition, this detector can achieve different tradeoffs between throughput and accuracy by changing the number of parallel search passes.

/pdf/flexible-n-way-mimo-detector-on-gpu-3syxf9ouj7.pdf

Flexible N-Way MIMO Detector on GPU

Multiple-input multiple-output (MIMO) wireless is an enabling technology for high spectral efficiency and has been adopted in many modern wireless communication standards, such as 3GPP-LTE and IEEE 802.11n. However, (optimal) maximum a-posteriori (MAP) detection suffers from excessively high computational complexity, which prevents its deployment in practical systems. Hence, many algorithms have been proposed in the literature that trade-off performance versus detection complexity. In this paper, we propose a flexible N-Way MIMO detector that achieves excellent error-rate performance and high throughput on graphics processing units (GPUs). The proposed detector includes the required QR decomposition step and a tree-search detector, which exploits the massive parallelism available in GPUs. The proposed algorithm performs multiple tree searches in parallel, which leads to excellent error-rate performance at low computational complexity on different GPU architectures, such as Nvidia Fermi and Kepler. We highlight the flexibility of the proposed detector and demonstrate that it achieves higher throughput than existing GPU-based MIMO detectors while achieving the same or better error-rate performance.

/pdf/gpu-acceleration-of-a-configurable-n-way-mimo-detector-for-14n9kgdfia.pdf

GPU Acceleration of a Configurable N-Way MIMO Detector for Wireless Systems

Reducing power consumption is a main challenge when adopting a network as a global on-chip communication interconnect since the reduction in power dissipation should not at the expense of degrading ...

Bei Yin

Papers

LTE uplink MIMO receiver with low complexity interference cancellation

Low complexity opportunistic decoder for network coding

Flexible N-Way MIMO Detector on GPU

GPU Acceleration of a Configurable N-Way MIMO Detector for Wireless Systems

A power efficient flit-admission scheme for wormhole-switched networks on chip