Interest in catalysis by metal nanoparticles (NPs) is increasing dramatically, as reflected by the large number of publications in the last five years. This field, "semi-heterogeneous catalysis", is at the frontier between homogeneous and heterogeneous catalysis, and progress has been made in the efficiency and selectivity of reactions and recovery and recyclability of the catalytic materials. Usually NP catalysts are prepared from a metal salt, a reducing agent, and a stabilizer and are supported on an oxide, charcoal, or a zeolite. Besides the polymers and oxides that used to be employed as standard, innovative stabilizers, media, and supports have appeared, such as dendrimers, specific ligands, ionic liquids, surfactants, membranes, carbon nanotubes, and a variety of oxides. Ligand-free procedures have provided remarkable results with extremely low metal loading. The Review presents the recent developments and the use of NP catalysis in organic synthesis, for example, in hydrogenation and C--C coupling reactions, and the heterogeneous oxidation of CO on gold NPs.

Nanoparticles as Recyclable Catalysts: The Frontier between Homogeneous and Heterogeneous Catalysis

3.7. Palladium Nanoparticles as Catalysts 888 3.8. Other Transition-Metal Complexes 888 3.9. Transition-Metal-Free Reactions 889 4. Applications 889 4.1. Alkynylation of Arenes 889 4.2. Alkynylation of Heterocycles 891 4.3. Synthesis of Enynes and Enediynes 894 4.4. Synthesis of Ynones 896 4.5. Synthesis of Carbocyclic Systems 897 4.6. Synthesis of Heterocyclic Systems 898 4.7. Synthesis of Natural Products 903 4.8. Synthesis of Electronic and Electrooptical Molecules 906

https://www.chem.ccu.edu.tw/~joyce/referance/ericyang/Chem.%20Rev/Chem.%20Rev.%202007,%20107,%20874-922.pdf

The Sonogashira Reaction: A Booming Methodology in Synthetic Organic Chemistry†

The increasing demand to produce enantiomerically pure pharmaceuticals, agrochemicals, flavors, and other fine chemicals has advanced the field of asymmetric catalytic technologies.1,2 Among all asymmetric catalytic methods, asymmetric hydrogenation utilizing molecular hydrogen to reduce prochiral olefins, ketones, and imines, have become one of the most efficient methods for constructing chiral compounds.3 The development of homogeneous asymmetric hydrogenation was initiated by Knowles4a and Horner4b in the late 1960s, after the discovery of Wilkinson’s homogeneous hydrogenation catalyst [RhCl(PPh3)3]. By replacing triphenylphosphine of the Wilkinson’s catalystwithresolvedchiralmonophosphines,6Knowles and Horner reported the earliest examples of enantioselective hydrogenation, albeit with poor enantioselectivity. Further exploration by Knowles with an improved monophosphine CAMP provided 88% ee in hydrogenation of dehydroamino acids.7 Later, two breakthroughs were made in asymmetric hydrogenation by Kagan and Knowles, respectively. Kagan reported the first bisphosphine ligand, DIOP, for Rhcatalyzed asymmetric hydrogenation.8 The successful application of DIOP resulted in several significant directions for ligand design in asymmetric hydrogenation. Chelating bisphosphorus ligands could lead to superior enantioselectivity compared to monodentate phosphines. Additionally, P-chiral phosphorus ligands were not necessary for achieving high enantioselectivity, and ligands with backbone chirality could also provide excellent ee’s in asymmetric hydrogenation. Furthermore, C2 symmetry was an important structural feature for developing new efficient chiral ligands. Kagan’s seminal work immediately led to the rapid development of chiral bisphosphorus ligands. Knowles made his significant discovery of a C2-symmetric chelating bisphosphine ligand, DIPAMP.9 Due to its high catalytic efficiency in Rh-catalyzed asymmetric hydrogenation of dehydroamino acids, DIPAMP was quickly employed in the industrial production of L-DOPA.10 The success of practical synthesis of L-DOPA via asymmetric hydrogenation constituted a milestone work and for this work Knowles was awarded the Nobel Prize in 2001.3k This work has enlightened chemists to realize * Corresponding author. 3029 Chem. Rev. 2003, 103, 3029−3069

New Chiral Phosphorus Ligands for Enantioselective Hydrogenation

A new iron(III) halide-promoted aza-Prins cyclization between γ,δ-unsaturated tosylamines and aldehydes provides six-membered azacycles in good to excellent yields. The process is based on the consecutive generation of γ-unsaturated-iminium ion and further nucleophilic attack by the unsaturated carbon−carbon bond. Homoallyl tosylamine leads to trans-2-alkyl-4-halo-1-tosylpiperidine as the major isomer. In addition, the alkyne aza-Prins cyclization between homopropargyl tosylamine and aldehydes gives 2-alkyl-4-halo-1-tosyl-1,2,5,6-tetrahydropyridines as the only cyclic products. The piperidine ring is widely distributed throughout Nature, e.g., in alkaloids,1 and is an important scaffold for drug discovery, being the core of many pharmaceutically significant compounds.2,3 The syntheses of these type of compounds have been extensively studied in the development of new drugs containing six-membered-ring heterocycles.4 Reactions between N-acyliminium ions and nucleophiles, also described as amidoalkylation or Mannich-type condensations, have been frequently used to introduce substituents at the R-carbon of an amine.5 There are several examples that involve an intramolecular attack of a nucleophilic olefin into an iminium cation for the construction of a heterocyclic ring system.6 Traditionally, the use of hemiaminals or their derivatives as precursors of N-acyliminium intermediates has been a common two-step strategy in these reactions.6a Among this type of cyclization is the aza-Prins cyclization,7 which uses alkenes as intramolecular nucleophile. However, cy† X-ray analysis. E-mail address: malopez@ull.es. (1) (a) Fodor, G. B.; Colasanti, B. Alkaloids: Chemical and Biological PerspectiVes; Pelletier, S. W., Ed.; Wiley: New York, 1985; Vol. 23, pp 1-90. (b) Baliah, V.; Jeyarama, R.; Chandrasekaran, L. Chem. ReV. 1983, 83, 379-423. (2) Watson, P. S.; Jiang, B.; Scott, B. Org. Lett. 2000, 2, 3679-3681. (3) Horton, D. A.; Bourne, G. T.; Smythe, M. L. Chem. ReV. 2003, 103, 893-930. (4) Buffat, M. G. P. Tetrahedron 2004, 60, 1701-1729 and references therein. (5) Speckamp, W. N.; Moolenaar, M. J. Tetrahedron 2000, 56, 3187- 3856 and references therein. (6) (a) Hiemstra, H.; Speckamp, W. N. In ComprehensiVe Organic Synthesis; Trost, B. M., Fleming, O., Heathcock, C. H., Eds.; Pergamon: New York, 1991; Vol. 2, pp 1047-1081. (b) Speckamp, W. N.; Hiemstra, H. Tetrahedron 1985, 41, 4367-4416. (7) (a) Dobbs, A. P.; Guesne, S. J. J.; Hursthouse, M. B.; Coles, S. J. Synlett 2003, 11, 1740-1742. (b) Dobbs, A. P.; Guesne, S. J. J.; Martinove, S.; Coles, S. J.; Hursthouse, M. B. J. Org. Chem. 2003, 68, 7880-7883. (c) Hanessian, S.; Tremblay, M.; Petersen, F. W. J. Am. Chem. Soc. 2004, 126, 6064-6071 and references therein. (d) Dobbs, A. P.; Guesne, S. J. Synlett 2005, 13, 2101-2103. ORGANIC

Iron-Catalyzed Reactions in Organic Synthesis

A wide array of forms of palladium has been utilized as precatalysts for Heck and Suzuki coupling reactions over the last 15 years. Historically, nearly every form of palladium used has been described as the active catalytic species. However, recent research has begun to shed light on the in situ transformations that many palladium precatalysts undergo during and before the catalytic reaction, and there are now many suggestions in the literature that narrow the scope of types of palladium that may be considered true “catalysts” in these coupling reactions. In this work, for each type of precatalyst, the recent literature is summarized and the type(s) of palladium that are proposed to be truly active are enumerated. All forms of palladium, including discrete soluble palladium complexes, solid-supported metal ligand complexes, supported palladium nano- and macroparticles, soluble palladium nanoparticles, soluble ligand-free palladium, and palladium-exchanged oxides are considered and reviewed here. A considerable focus is placed on solid precatalysts and on evidence for and against catalysis by solid surfaces vs. soluble species when starting with various precatalysts. The review closes with a critical overview of various control experiments or tests that have been used by authors to assess the homogeneity or heterogeneity of catalyst systems.

On the Nature of the Active Species in Palladium Catalyzed Mizoroki–Heck and Suzuki–Miyaura Couplings – Homogeneous or Heterogeneous Catalysis, A Critical Review

The catalytic formation of C–C bonds is one of the most useful transformations in organic synthesis. Over the last decade, the use of transition metal nanoparticles (NPs) in catalysis has attracted much interest and their use in C–C bond formation reactions constitutes one of their most important applications, including the Suzuki, Heck, and Sonogashira reactions. This tutorial review highlights recent work in this active area, considering the stabilising agents used to prepare the NPs, the catalytic results and the recycling possibilities.

Pd nanoparticles for C–C coupling reactions

Preface 1 Introduction to hydroformylation PWNM van Leeuwen 2 Hydroformylation with unmodified rhodium catalysts R Lazzaroni, et al 3 Rhodium phosphite catalysts PCJ Kamer, et al 4 Phosphines as ligands PWNM van Leeuwen, et al 5 Asymmetric hydroformylation C Claver, PWNM van Leeuwen 6 Hydroformylation in organic synthesis S Castillon, E Fernandez 7 Aqueous biphasic hydroformylation J Herwig, R Fischer 8 Process aspects of rhodium-catalyzed hydroformylation P Arnoldy 9 Catalyst preparation and decomposition PWNM van Leeuwen 10 Novel developments in hydroformylation JNH Reek, et al Subject index

Rhodium Catalyzed Hydroformylation

Palladium nanoparticles (4 nm, fcc) were prepared through decomposition of [Pd2(dba)3] by H2 in the presence of a chiral xylofuranoside diphosphite. These particles catalyze the allylic alkylation of rac-3-acetoxy-1,3-diphenyl-1-propene with dimethyl malonate leading to an almost total conversion of the (R) enantiomer and almost no reaction with the (S). This gives rise to 97% ee for the alkylation product and a kinetic resolution of the substrate recovered with ca. 90% ee. This behavior was compared to that of a molecular catalyst at various dilutions, and the differences between the two systems are discussed. This is the first colloidal system shown to display such a high enantioselectivity besides the well-known Pt/cinchonidine system.

A case for enantioselective allylic alkylation catalyzed by palladium nanoparticles.

Ligands derived from carbohydrates for asymmetric catalysis

Phosphite-Containing Ligands for Asymmetric Catalysis PietW. N.M. van Leeuwen, Paul C. J. Kamer,Carmen Claver,Oscar P amies,* andMontserrat Di eguez* Institute of Chemical Research of Catalonia, Avinguda Països Catalans 16, 43007 Tarragona, Spain University of St. Andrews, EaStCHEM, School of Chemistry, St. Andrews, Fife KY16 9ST, United Kingdom Universitat Rovira i Virgili, Departament de Química Física i Inorg anica, C/Marcel 3 lí Domingo s/n, 43007 Tarragona, Spain

Carmen Claver

Papers

Pd nanoparticles for C–C coupling reactions

Rhodium Catalyzed Hydroformylation

A case for enantioselective allylic alkylation catalyzed by palladium nanoparticles.

Ligands derived from carbohydrates for asymmetric catalysis

Phosphite-containing ligands for asymmetric catalysis.