Energy density is the main property of rechargeable batteries that has driven the entire technology forward in past decades. Lithium-ion batteries (LIBs) now surpass other, previously competitive battery types (for example, lead–acid and nickel metal hydride) but still require extensive further improvement to, in particular, extend the operation hours of mobile IT devices and the driving mileages of all-electric vehicles. In this Review, we present a critical overview of a wide range of post-LIB materials and systems that could have a pivotal role in meeting such demands. We divide battery systems into two categories: near-term and long-term technologies. To provide a realistic and balanced perspective, we describe the operating principles and remaining issues of each post-LIB technology, and also evaluate these materials under commercial cell configurations. Post-lithium-ion batteries are reviewed with a focus on their operating principles, advantages and the challenges that they face. The volumetric energy density of each battery is examined using a commercial pouch-cell configuration to evaluate its practical significance and identify appropriate research directions.

Promise and reality of post-lithium-ion batteries with high energy densities

As the environment preservation gradually becomes a matter of major social concern and more strict legislation is being imposed on effluent discharge, more effective processes are required to deal with non-readily biodegradable and toxic pollutants. Synthetic organic dyes in industrial effluents cannot be destroyed in conventional wastewater treatment and consequently, an urgent challenge is the development of new environmentally benign technologies able to mineralize completely these non-biodegradable compounds. This review aims to increase the knowledge on the electrochemical methods used at lab and pilot plant scale to decontaminate synthetic and real effluents containing dyes, considering the period from 2009 to 2013, as an update of our previous review up to 2008. Fundamentals and main applications of electrochemical advanced oxidation processes and the other electrochemical approaches are described. Typical methods such as electrocoagulation, electrochemical reduction, electrochemical oxidation and indirect electro-oxidation with active chlorine species are discussed. Recent advances on electrocatalysis related to the nature of anode material to generate strong heterogeneous OH as mediated oxidant of dyes in electrochemical oxidation are extensively examined. The fast destruction of dyestuffs mediated with electrogenerated active chlorine is analyzed. Electro-Fenton and photo-assisted electrochemical methods like photoelectrocatalysis and photoelectro-Fenton, which destroy dyes by heterogeneous OH and/or homogeneous OH produced in the solution bulk, are described. Current advantages of the exposition of effluents to sunlight in the emerging photo-assisted procedures of solar photoelectrocatalysis and solar photoelectro-Fenton are detailed. The characteristics of novel combined methods involving photocatalysis, adsorption, nanofiltration, microwaves and ultrasounds among others and the use of microbial fuel cells are finally discussed.

Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods. An updated review

Rod Borup is a Team Leader in the fuel cell program at Los Alamos National Lab in Los Alamos, New Mexico. He received his B.S.E. in Chemical Engineering from the University of Iowa in 1988 and his Ph.D. from the University of Washington in 1993. He has worked on fuel cell technology since 1994, working in the areas of hydrogen production and PEM fuel cell stack components. He has been awarded 12 U.S. patents, authored over 40 papers related to fuel cell technology, and presented over 50 oral papers at national meetings. His current main research area is related to water transport in PEM fuel cells and PEM fuel cell durability. Recently, he was awarded the 2005 DOE Hydrogen Program R&D Award for the most significant R&D contribution of the year for his team's work in fuel cell durability and was the Principal Investigator for the 2004 Fuel Cell Seminar (San Antonio, TX, USA) Best Poster Award. Jeremy Meyers is an Assistant Professor of materials science and engineering and mechanical engineering at the University of Texas at Austin, where his research focuses on the development of electrochemical energy systems and materials. Prior to joining the faculty at Texas, Jeremy workedmore » as manager of the advanced transportation technology group at UTC Power, where he was responsible for developing new system designs and components for automotive PEM fuel cell power plants. While at UTC Power, Jeremy led several customer development projects and a DOE-sponsored investigation into novel catalysts and membranes for PEM fuel cells. Jeremy has coauthored several papers on key mechanisms of fuel cell degradation and is a co-inventor of several patents. In 2006, Jeremy and several colleagues received the George Mead Medal, UTC's highest award for engineering achievement, and he served as the co-chair of the Gordon Research Conference on fuel cells. Jeremy received his Ph.D. in Chemical Engineering from the University of California at Berkeley and holds a Bachelor's Degree in Chemical Engineering from Stanford University. Bryan Pivovar received his B.S. in Chemical Engineering from the University of Wisconsin in 1994. He completed his Ph.D. in Chemical Engineering at the University of Minnesota in 2000 under the direction of Profs. Ed Cussler and Bill Smyrl, studying transport properties in fuel cell electrolytes. He continued working in the area of polymer electrolyte fuel cells at Los Alamos National Laboratory as a post-doc (2000-2001), as a technical staff member (2001-2005), and in his current position as a team leader (2005-present). In this time, Bryan's research has expanded to include further aspects of fuel cell operation, including electrodes, subfreezing effects, alternative polymers, hydroxide conductors, fuel cell interfaces, impurities, water transport, and high-temperature membranes. Bryan has served at various levels in national and international conferences and workshops, including organizing a DOE sponsored workshop on freezing effects in fuel cells and an ARO sponsored workshop on alkaline membrane fuel cells, and he was co-chair of the 2007 Gordon Research Conference on Fuel Cells. Minoru Inaba is a Professor at the Department of Molecular Science and Technology, Faculty of Engineering, Doshisha University, Japan. He received his B.Sc. from the Faculty of Engineering, Kyoto University, in 1984 and his M.Sc. in 1986 and his Dr. Eng. in 1995 from the Graduate School of Engineering, Kyoto University. He has worked on electrochemical energy conversion systems including fuel cells and lithium-ion batteries at Kyoto University (1992-2002) and at Doshisha University (2002-present). His primary research interest is the durability of polymer electrolyte fuel cells (PEFCs), in particular, membrane degradation, and he has been involved in NEDO R&D research projects on PEFC durability since 2001. He has authored over 140 technical papers and 30 review articles. Kenichiro Ota is a Professor of the Chemical Energy Laboratory at the Graduate School of Engineering, Yokohama National University, Japan. He received his B.S.E. in Applied Chemistry from the University of Tokyo in 1968 and his Ph.D. from the University of Tokyo in 1973. He has worked on hydrogen energy and fuel cells since 1974, working on materials science for fuel cells and water electrolysis. He has published more than 150 original papers, 70 review papers, and 50 scientific books. He is now the president of the Hydrogen Energy Systems Society of Japan, the chairman of the Fuel Cell Research Group of the Electrochemical Society of Japan, and the chairman of the National Committee for the Standardization of the Stationary Fuel Cells. ABSTRACT TRUNCATED« less

Scientific aspects of polymer electrolyte fuel cell durability and degradation.

2.2. Fenton’s Chemistry 6575 2.2.1. Origins 6575 2.2.2. Fenton Process 6575 2.3. Photo-Fenton Process 6577 3. H2O2 Electrogeneration for Water Treatment 6577 3.1. Fundamentals 6578 3.2. Cathode Materials 6579 3.3. Divided Cells 6580 3.4. Undivided Cells 6583 4. Electro-Fenton (EF) Process 6585 4.1. Origins 6585 4.2. Fundamentals of EF for Water Remediation 6586 4.2.1. Cell Configuration 6586 4.2.2. Cathodic Fe2+ Regeneration 6586 4.2.3. Anodic Generation of Heterogeneous Hydroxyl Radical 6587

Electro-Fenton process and related electrochemical technologies based on Fenton's reaction chemistry

https://www.jpcomplex.ir/Content/media/image/2013/08/772_orig.pdf

Electrochemical technologies in wastewater treatment

Besides inorganic materials (acids, bases and salts), industrial waste water also contains organic substances which have to be “mineralized”, i.e. oxidized to CO2, H2O, N2 (or NO3 −), Cl− and SO4 −, before the water can be discharged. The main methods for analyzing organic material in waste water are: 


TOC
	
total organic carbon
	
[mg C/l]
	

COD
	
chemical oxygen demand
	
[mg O/l]
	

BOD5
	
biological oxygen demand in five days
	
[mg O/l]

Treatment Techniques for Waste Water from Chemical Industries

In this process a carrier (Mn+) is electrochem. oxidized (or reduced) and then allowed to react with the org. compd. in a sep. vessel. When the reaction is complete a sepn. of product is made and the spent liquor is returned to the electrochem. cell where the carrier is regenerated. The loss of current efficiency (CE) using the Mn2+/Mn3+ system in 88% H2SO4 was due to the oxidn. of the org. compd. (mainly to CO2) carried over with the electrolyte back to the cell. The study was extended to 50% H2SO4 and a simple relation proposed which permits the calcn. of the loss in CE from the total org. C present in the recycled electrolyte. The oxidn. of PhMe and its derivs. to the corresponding benzaldehydes was carried out with electrogenerated Mn2(SO4)3 in H2SO4. [on SciFinder (R)]

Current efficiency losses in indirect electrochemical processing

Electrochem. perfluorination of octanesulfonyl fluoride [40630-63-5] and octanoyl fluoride [592-94-9] to their fluoro compds. was studied over a wide range of exptl. conditions. Significant improvement of the reported yield of perfluoro-product was achieved with electrolysis at high potential. The results are explained in terms of a model involving simultaneous adsorption of the reactant and of F on a NiF2 surface. [on SciFinder (R)]

Electrochemical perfluorination of organic acids. Contribution to the knowledge of the mechanism

The chem. redn. of anthraquinone(I) has at least 2 disadvantages on the industrial scale; therefore, an electrochem. method was developed. The electrochem. redn. of I is done in a 2-compartment cell using concd. H2SO4 (15-17 mol/dm3) as the electrolyte at the relatively low temp. of 40-60 Deg. The cathode can be Pt or Ag, and a low c.d. (<50 mA/cm2) is used. In the course of the expts., several cathode materials were tested, including Pt, Ag, Pb, graphite, Cu and Ni. [on SciFinder (R)]

The electrochemical reduction of anthraquinone to anthrone in concentrated H2SO4

The electrochemical activation of ethylene oxidation was studied over rhodium catalysts of different thickness (40, 100 and 160 nm) sputtered on top of a thin layer of TiO2 deposited on YSZ. The strong relationship between catalytic activity and oxidation state of rhodium was confirmed. Under open-circuit operation the catalyst potential appears as a suitable indicator of the surface oxidation state of rhodium allowing a prediction of the catalytic behavior from solid electrolyte potentiometric measurements. Under closed-circuit conditions the catalyst potential was used as a tool to tune the catalytic activity of rhodium which showed increasing promotional efficiency with decreasing catalyst film thickness.

/pdf/electrochemical-modification-of-the-catalytic-activity-of-32nvz6abq3.pdf

Ch. Comninellis

Papers

Treatment Techniques for Waste Water from Chemical Industries

Current efficiency losses in indirect electrochemical processing

Electrochemical perfluorination of organic acids. Contribution to the knowledge of the mechanism

The electrochemical reduction of anthraquinone to anthrone in concentrated H2SO4

Electrochemical modification of the catalytic activity of TiO2/YSZ supported rhodium films