In recent times, the use of personal protective equipment, such as face masks or respirators, is becoming more and more critically important because of common pollution; furthermore, face masks have become a necessary element in the global fight against the COVID-19 pandemic. For this reason, the main mission of scientists has become the development of face masks with exceptional properties that will enhance their performance. The versatility of electrospun polymer nanofibers has determined their suitability as a material for constructing "smart" filter media. This paper provides an overview of the research carried out on nanofibrous filters obtained by electrospinning. The progressive development of the next generation of face masks whose unique properties can be activated in response to a specific external stimulus is highlighted. Thanks to additional components incorporated into the fiber structure, filters can, for example, acquire antibacterial or antiviral properties, self-sterilize the structure, and store the energy generated by users. Despite the discovery of several fascinating possibilities, some of them remain unexplored. Stimuli-responsive filters have the potential to become products of large-scale availability and great importance to society as a whole.

Nanotechnology Transition Roadmap toward Multifunctional Stimuli-Responsive Face Masks.

After the spread of COVID-19, surgical masks became highly recommended to the public. They tend to be handled and used multiple times, which may impact their performance. To evaluate this risk, surgical masks of Type IIR were submitted to four simulated treatments: folding, ageing with artificial saliva or sweat and washing cycles. The air permeability, mechanical integrity, electrostatic potential, and filtration efficiency (FE) of the masks were measured to quantify possible degradation. Overall, air permeability and mechanical integrity were not affected, except after washing, which slightly degraded the filtering layers. Electrostatic potential and FE showed a strong correlation, highlighting the role of electrostatic charges on small particle filtration. A slight decrease in FE for 100 nm particles was found, from 74.4% for the reference masks to 70.6% for the mask treated in saliva for 8 h. A strong effect was observed for washed masks, resulting in FE of 46.9% (± 9.5%), comparable to that of a control group with no electrostatic charges. A dry store and reuse strategy could thus be envisaged for the public if safety in terms of viral and bacterial charge is ensured, whereas washing strongly impacts FE and is not recommended. 

/pdf/on-the-durability-of-surgical-masks-after-simulated-handling-t58eo45f.pdf

On the durability of surgical masks after simulated handling and wear

/pdf/on-the-durability-of-surgical-masks-after-simulated-handling-vuceosr2.pdf

A new strategy for butanol extraction from COVID-19 mask using catalytic pyrolysis process over ZSM-5 zeolite catalyst and its kinetic behaviour

The rapid generation of biomedical waste (BMW) due to covid-19 pandemic has created burden on the existing municipal solid waste management (MSWM) system in both developed and developing countries. The substantial influx of covid patients in Maharashtra, India has influenced the pattern of BMW generation, especially for the yellow category of BMW and incineration facilities. The objective of the study was to estimate the daily face mask consumption (DFM) and BMW generation from May 2020 to August 2021 in Maharashtra, India. The study was carried out based on the confirmed covid 19 cases, population forecast, urban population (%), BMW generation rate (kg/bed/day), and so on. The data set for the each paramters were collected from web-portals, published reports based on previous studies. These data sets were further regrouped, processed and analyised using mathematical equations. The study also revealed that Mumbai, Pune, and Thane districts, India has contributed ≥ 60% of the DFM and BMW generation. It was found that the DFM by non-covid patients was higher compared to the covid patients (DCFM). Further, it was revealed that BMW generated in the months of July 2020 (152 tons/day), August 2020 (228 tons/day), September 2020 (364 tons/day), October 2020 (177 tons/day), March 2021 (405 tons/day), April 2021 (1,102 tons/day), May 2021 (705 tons/day), June 2021 (194 tons/day), and July 2021 (149 tons/day), exceeded the existing BMW treatment capcity of 132 tons/day. The sudden spike in covid-19 cases has influenced the pattern of DFM and BMW generation, espeicllay for the yellow category of BMW (BMWCY) and has increased the burden on BMW incineration facilities. The daily emission rates from BMW-incineration was in the order PM10> NO2> CO>SO2, with maximum emission of PM10 (85.61 kg of pollutant/day). The F-test was performed using one-way ANOVA to understand the influence of covid cases on daily face mask consumption. It was found that F-satistic of DCFM and BMWCY is more than the F-critical i.e., increase in covid cases had a significant effect on mass consumption rate and BMW generation. 

https://doi.org/10.1016/j.envres.2022.113363

Mask consumption and biomedical waste generation rate during Covid-19 pandemic: A case study of central India

Reuse of medical face masks in domestic and community settings without sacrificing safety: Ecological and economical lessons from the Covid-19 pandemic.

Claire Dessale

Papers

Reuse of medical face masks in domestic and community settings without sacrificing safety: Ecological and economical lessons from the Covid-19 pandemic.

Evaluation of Image Quality of Motion-Corrected Supine Breast MRI.