The ongoing deployment of 5G cellular systems is continuously exposing the inherent limitations of this system, compared to its original premise as an enabler for Internet of Everything applications. These 5G drawbacks are spurring worldwide activities focused on defining the next-generation 6G wireless system that can truly integrate far-reaching applications ranging from autonomous systems to extended reality. Despite recent 6G initiatives (one example is the 6Genesis project in Finland), the fundamental architectural and performance components of 6G remain largely undefined. In this article, we present a holistic, forward-looking vision that defines the tenets of a 6G system. We opine that 6G will not be a mere exploration of more spectrum at high-frequency bands, but it will rather be a convergence of upcoming technological trends driven by exciting, underlying services. In this regard, we first identify the primary drivers of 6G systems, in terms of applications and accompanying technological trends. Then, we propose a new set of service classes and expose their target 6G performance requirements. We then identify the enabling technologies for the introduced 6G services and outline a comprehensive research agenda that leverages those technologies. We conclude by providing concrete recommendations for the roadmap toward 6G. Ultimately, the intent of this article is to serve as a basis for stimulating more out-of-the-box research around 6G.

/pdf/a-vision-of-6g-wireless-systems-applications-trends-4yitw2f3zo.pdf

A Vision of 6G Wireless Systems: Applications, Trends, Technologies, and Open Research Problems

In the near future, i.e., beyond 4G, some of the prime objectives or demands that need to be addressed are increased capacity, improved data rate, decreased latency, and better quality of service. To meet these demands, drastic improvements need to be made in cellular network architecture. This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users. In this detailed survey, the prime focus is on the 5G cellular network architecture, massive multiple input multiple output technology, and device-to-device communication (D2D). Along with this, some of the emerging technologies that are addressed in this paper include interference management, spectrum sharing with cognitive radio, ultra-dense networks, multi-radio access technology association, full duplex radios, millimeter wave solutions for 5G cellular networks, and cloud technologies for 5G radio access networks and software defined networks. In this paper, a general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G cellular network architecture. A detailed survey is included regarding current research projects being conducted in different countries by research groups and institutions that are working on 5G technologies.

A Survey of 5G Network: Architecture and Emerging Technologies

Device-to-device (D2D) communications was initially proposed in cellular networks as a new paradigm for enhancing network performance. The emergence of new applications such as content distribution and location-aware advertisement introduced new user cases for D2D communications in cellular networks. The initial studies showed that D2D communications has advantages such as increased spectral efficiency and reduced communication delay. However, this communication mode introduces complications in terms of interference control overhead and protocols that are still open research problems. The feasibility of D2D communications in Long-Term Evolution Advanced is being studied by academia, industry, and standardization bodies. To date, there are more than 100 papers available on D2D communications in cellular networks, but there is no survey on this field. In this paper, we provide a taxonomy based on the D2D communicating spectrum and review the available literature extensively under the proposed taxonomy. Moreover, we provide new insights into the over-explored and under-explored areas that lead us to identify open research problems of D2D communications in cellular networks.

https://eprints.networks.imdea.org/id/document/2488

A Survey on Device-to-Device Communication in Cellular Networks

Device-to-Device (D2D) communication was initially proposed in cellular networks as a new paradigm to enhance network performance. The emergence of new applications such as content distribution and location-aware advertisement introduced new use-cases for D2D communications in cellular networks. The initial studies showed that D2D communication has advantages such as increased spectral efficiency and reduced communication delay. However, this communication mode introduces complications in terms of interference control overhead and protocols that are still open research problems. The feasibility of D2D communications in LTE-A is being studied by academia, industry, and the standardization bodies. To date, there are more than 100 papers available on D2D communications in cellular networks and, there is no survey on this field. In this article, we provide a taxonomy based on the D2D communicating spectrum and review the available literature extensively under the proposed taxonomy. Moreover, we provide new insights to the over-explored and under-explored areas which lead us to identify open research problems of D2D communication in cellular networks.

Massive multiple-input multiple-output MIMO is one of themost promising technologies for the next generation of wirelesscommunication networks because it has the potential to providegame-changing improvements in spectral efficiency SE and energyefficiency EE. This monograph summarizes many years ofresearch insights in a clear and self-contained way and providesthe reader with the necessary knowledge and mathematical toolsto carry out independent research in this area. Starting froma rigorous definition of Massive MIMO, the monograph coversthe important aspects of channel estimation, SE, EE, hardwareefficiency HE, and various practical deployment considerations.From the beginning, a very general, yet tractable, canonical systemmodel with spatial channel correlation is introduced. This modelis used to realistically assess the SE and EE, and is later extendedto also include the impact of hardware impairments. Owing tothis rigorous modeling approach, a lot of classic "wisdom" aboutMassive MIMO, based on too simplistic system models, is shownto be questionable.

https://www.nowpublishers.com/article/DownloadSummary/SIG-093

Massive MIMO Networks: Spectral, Energy, and Hardware Efficiency

Reducing energy consumption in wireless communications has attracted increasing attention recently. Advanced physical layer techniques such as multiple-input multiple-output (MIMO) and orthogonal frequency division multiplexing (OFDM), cognitive radio, network coding, cooperative communication, etc.; new network architectures such as heterogeneous networks, distributed antennas, multi-hop cellulars, etc.; as well as radio and network resource management schemes such as various cross-layer optimization algorithms, dynamic power saving, multiple radio access technologies coordination, etc. have been proposed to address this issue. In this article, we overview these technologies and present the state-of-the-art on each aspect. Some challenges that need to be solved in the area are also described.

A survey of energy-efficient wireless communications

In cellular networks, proximity users may communicate directly without going through the base station, which is called Device-to-device (D2D) communications and it can improve spectral efficiency. However, D2D communications may generate interference to the existing cellular networks if not designed properly. In this paper, we study a resource allocation problem to maximize the overall network throughput while guaranteeing the quality-of-service (QoS) requirements for both D2D users and regular cellular users (CUs). A three-step scheme is proposed. It first performs admission control and then allocates powers for each admissible D2D pair and its potential CU partners. Next, a maximum weight bipartite matching based scheme is developed to select a suitable CU partner for each admissible D2D pair to maximize the overall network throughput. Numerical results show that the proposed scheme can significantly improve the performance of the hybrid system in terms of D2D access rate and the overall network throughput. The performance of D2D communications depends on D2D user locations, cell radius, the numbers of active CUs and D2D pairs, and the maximum power constraint for the D2D pairs.

Device-to-Device Communications Underlaying Cellular Networks

Device-to-device communications enable two proximity users to transmit signal directly without going through the base station. It can increase network spectral efficiency and energy efficiency, reduce transmission delay, offload traffic for the BS, and alleviate congestion in the cellular core networks. However, many technical challenges need to be addressed for D2D communications to harvest the potential benefits, including device discovery and D2D session setup, D2D resource allocation to guarantee QoS, D2D MIMO transmission, as well as D2D-aided BS deployment in heterogeneous networks. In this article, the basic concepts of D2D communications are first introduced, and then existing fundamental works on D2D communications are discussed. In addition, some potential research topics and challenges are also identified.

Device-to-device communications in cellular networks

Device-to-device (D2D) communications have been recently proposed as an effective way to increase both spectrum and energy efficiency for future cellular systems. In this paper, joint mode selection, channel assignment, and power control in D2D communications are addressed. We aim at maximizing the overall system throughput while guaranteeing the signal-to-noise-and-interference ratio of both D2D and cellular links. Three communication modes are considered for D2D users: cellular mode, dedicated mode, and reuse mode. The optimization problem could be decomposed into two subproblems: power control and joint mode selection and channel assignment. The joint mode selection and channel assignment problem is NP-hard, whose optimal solution can be found by the branch-and-bound method, but is very complicated. Therefore, we develop low-complexity algorithms according to the network load. Through comparing different algorithms under different network loads, proximity gain, hop gain, and reuse gain could be demonstrated in D2D communications.

Joint Mode Selection and Resource Allocation for Device-to-Device Communications

Multi-access edge computing (MEC), which is deployed in the proximity area of the mobile user side as a supplement to the traditional remote cloud center, has been regarded as a promising technique for 5G heterogeneous networks. With the assistance of MEC, mobile users can access computing resource effectively. Also, congestion in the core network can be alleviated by offloading. To adapt in stochastic and constantly varying environments, augmented intelligence (AI) is introduced in MEC for intelligent decision making. For this reason, several recent works have focused on intelligent offloading in MEC to harvest its potential benefits. Therefore, machine learning (ML)-based approaches, including reinforcement learning, supervised/unsupervised learning, deep learning, as well as deep reinforcement learning for AI in MEC have become hot topics. However, many technical challenges still remain to be addressed for AI in MEC. In this article, the basic concept of MEC and main applications are introduced, and existing fundamental works using various ML-based approaches are reviewed. Furthermore, some potential issues of AI in MEC for future work are discussed.

Daquan Feng

Papers

A survey of energy-efficient wireless communications

Device-to-Device Communications Underlaying Cellular Networks

Device-to-device communications in cellular networks

Joint Mode Selection and Resource Allocation for Device-to-Device Communications

Intelligent Offloading in Multi-Access Edge Computing: A State-of-the-Art Review and Framework