“Unpaired Image-to-Image Translation using Cycle-Consistent Adversarial Networks”の学習報告

IEEE Transactions on Pattern Analysis and Machine Intelligence

This paper presents the design and implementation of the first in-band full duplex WiFi radios that can simultaneously transmit and receive on the same channel using standard WiFi 802.11ac PHYs and achieves close to the theoretical doubling of throughput in all practical deployment scenarios. Our design uses a single antenna for simultaneous TX/RX (i.e., the same resources as a standard half duplex system). We also propose novel analog and digital cancellation techniques that cancel the self interference to the receiver noise floor, and therefore ensure that there is no degradation to the received signal. We prototype our design by building our own analog circuit boards and integrating them with a fully WiFi-PHY compatible software radio implementation. We show experimentally that our design works robustly in noisy indoor environments, and provides close to the expected theoretical doubling of throughput in practice.

https://dl.acm.org/doi/pdf/10.1145/2486001.2486033

Full duplex radios

In the near future, i.e., beyond 4G, some of the prime objectives or demands that need to be addressed are increased capacity, improved data rate, decreased latency, and better quality of service. To meet these demands, drastic improvements need to be made in cellular network architecture. This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users. In this detailed survey, the prime focus is on the 5G cellular network architecture, massive multiple input multiple output technology, and device-to-device communication (D2D). Along with this, some of the emerging technologies that are addressed in this paper include interference management, spectrum sharing with cognitive radio, ultra-dense networks, multi-radio access technology association, full duplex radios, millimeter wave solutions for 5G cellular networks, and cloud technologies for 5G radio access networks and software defined networks. In this paper, a general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G cellular network architecture. A detailed survey is included regarding current research projects being conducted in different countries by research groups and institutions that are working on 5G technologies.

A Survey of 5G Network: Architecture and Emerging Technologies

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

/pdf/in-band-full-duplex-wireless-challenges-and-opportunities-djlyhtrciu.pdf

In-Band Full-Duplex Wireless: Challenges and Opportunities

This paper presents a full duplex radio design using signal inversion and adaptive cancellation. Signal inversion uses a simple design based on a balanced/unbalanced (Balun) transformer. This new design, unlike prior work, supports wideband and high power systems. In theory, this new design has no limitation on bandwidth or power. In practice, we find that the signal inversion technique alone can cancel at least 45dB across a 40MHz bandwidth. Further, combining signal inversion cancellation with cancellation in the digital domain can reduce self-interference by up to 73dB for a 10MHz OFDM signal. This paper also presents a full duplex medium access control (MAC) design and evaluates it using a testbed of 5 prototype full duplex nodes. Full duplex reduces packet losses due to hidden terminals by up to 88%. Full duplex also mitigates unfair channel allocation in AP-based networks, increasing fairness from 0.85 to 0.98 while improving downlink throughput by 110% and uplink throughput by 15%. These experimental results show that a re- design of the wireless network stack to exploit full duplex capability can result in significant improvements in network performance.

/pdf/practical-real-time-full-duplex-wireless-48e487yqxp.pdf

Practical, real-time, full duplex wireless

This paper presents the design and implementation of SpotFi, an accurate indoor localization system that can be deployed on commodity WiFi infrastructure. SpotFi only uses information that is already exposed by WiFi chips and does not require any hardware or firmware changes, yet achieves the same accuracy as state-of-the-art localization systems. SpotFi makes two key technical contributions. First, SpotFi incorporates super-resolution algorithms that can accurately compute the angle of arrival (AoA) of multipath components even when the access point (AP) has only three antennas. Second, it incorporates novel filtering and estimation techniques to identify AoA of direct path between the localization target and AP by assigning values for each path depending on how likely the particular path is the direct path. Our experiments in a multipath rich indoor environment show that SpotFi achieves a median accuracy of 40 cm and is robust to indoor hindrances such as obstacles and multipath.

https://dl.acm.org/doi/pdf/10.1145/2785956.2787487

SpotFi: Decimeter Level Localization Using WiFi

We present BackFi, a novel communication system that enables high throughput, long range communication between very low power backscatter devices and WiFi APs using ambient WiFi transmissions as the excitation signal. Specifically, we show that it is possible to design devices and WiFi APs such that the WiFi AP in the process of transmitting data to normal WiFi clients can decode backscatter signals which the devices generate by modulating information on to the ambient WiFi transmission. We show via prototypes and experiments that it is possible to achieve communication rates of up to 5 Mbps at a range of 1 m and 1 Mbps at a range of 5 meters. Such performance is an order to three orders of magnitude better than the best known prior WiFi backscatter system [27,25]. BackFi design is energy efficient, as it relies on backscattering alone and needs insignificant power, hence the energy consumed per bit is small.

/pdf/backfi-high-throughput-wifi-backscatter-3feteleq2j.pdf

BackFi: High Throughput WiFi Backscatter

This paper presents the design and implementation of the first in-band full duplex WiFi-PHY based MIMO radios that practically achieve the theoretical doubling of throughput. Our design solves two fundamental challenges associated with MIMO full duplex: complexity and performance. Our design achieves full duplex with a cancellation design whose complexity scales almost linearly with the number of antennas, this complexity is close to the optimal possible. Further we also design novel digital estimation and cancellation algorithms that eliminate almost all interference and achieves the same performance as a single antenna full duplex SISO system, which is again the best possible performance. We prototype our design by building our own analog circuit boards and integrating them with a WiFi-PHY compatible standard WARP software radio implementation. We show experimentally that our design works robustly in noisy indoor environments, and provides close to the expected theoretical doubling of throughput in practice.

/pdf/full-duplex-mimo-radios-3lv4rh6pon.pdf

Dinesh Bharadia

Papers

Full duplex radios

Practical, real-time, full duplex wireless

SpotFi: Decimeter Level Localization Using WiFi

BackFi: High Throughput WiFi Backscatter

Full duplex MIMO radios