[신간의 별자리x] 우리/미술, 그리고 ‘슬픔의 박물관’

This paper presents the design and implementation of the first in-band full duplex WiFi radios that can simultaneously transmit and receive on the same channel using standard WiFi 802.11ac PHYs and achieves close to the theoretical doubling of throughput in all practical deployment scenarios. Our design uses a single antenna for simultaneous TX/RX (i.e., the same resources as a standard half duplex system). We also propose novel analog and digital cancellation techniques that cancel the self interference to the receiver noise floor, and therefore ensure that there is no degradation to the received signal. We prototype our design by building our own analog circuit boards and integrating them with a fully WiFi-PHY compatible software radio implementation. We show experimentally that our design works robustly in noisy indoor environments, and provides close to the expected theoretical doubling of throughput in practice.

https://dl.acm.org/doi/pdf/10.1145/2486001.2486033

Full duplex radios

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

/pdf/in-band-full-duplex-wireless-challenges-and-opportunities-djlyhtrciu.pdf

In-Band Full-Duplex Wireless: Challenges and Opportunities

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

This paper presents and evaluates two principles for wireless routing protocols. The first is datapath validation: data traffic quickly discovers and fixes routing inconsistencies. The second is adaptive beaconing: extending the Trickle algorithm to routing control traffic reduces route repair latency and sends fewer beacons.We evaluate datapath validation and adaptive beaconing in CTP Noe, a sensor network tree collection protocol. We use 12 different testbeds ranging in size from 20--310 nodes, comprising seven platforms, and six different link layers, on both interference-free and interference-prone channels. In all cases, CTP Noe delivers > 90% of packets. Many experiments achieve 99.9%. Compared to standard beaconing, CTP Noe sends 73% fewer beacons while reducing topology repair latency by 99.8%. Finally, when using low-power link layers, CTP Noe has duty cycles of 3% while supporting aggregate loads of 30 packets/minute.

/pdf/collection-tree-protocol-selhhlblmq.pdf

Collection tree protocol

This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the full-duplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays.

/pdf/achieving-single-channel-full-duplex-wireless-communication-3pg630e002.pdf

Achieving single channel, full duplex wireless communication

This paper presents a full duplex radio design using signal inversion and adaptive cancellation. Signal inversion uses a simple design based on a balanced/unbalanced (Balun) transformer. This new design, unlike prior work, supports wideband and high power systems. In theory, this new design has no limitation on bandwidth or power. In practice, we find that the signal inversion technique alone can cancel at least 45dB across a 40MHz bandwidth. Further, combining signal inversion cancellation with cancellation in the digital domain can reduce self-interference by up to 73dB for a 10MHz OFDM signal. This paper also presents a full duplex medium access control (MAC) design and evaluates it using a testbed of 5 prototype full duplex nodes. Full duplex reduces packet losses due to hidden terminals by up to 88%. Full duplex also mitigates unfair channel allocation in AP-based networks, increasing fairness from 0.85 to 0.98 while improving downlink throughput by 110% and uplink throughput by 15%. These experimental results show that a re- design of the wireless network stack to exploit full duplex capability can result in significant improvements in network performance.

/pdf/practical-real-time-full-duplex-wireless-48e487yqxp.pdf

Practical, real-time, full duplex wireless

We present empirical measurements of the packet delivery performance of the latest sensor platforms: Micaz and Telos motes. In this article, we present observations that have implications to a set of common assumptions protocol designers make while designing sensornet protocols—specifically—the MAC and network layer protocols. We first distill these common assumptions in to a conceptual model and show how our observations support or dispute these assumptions. We also present case studies of protocols that do not make these assumptions. Understanding the implications of these observations to the conceptual model can improve future protocol designs.

/pdf/an-empirical-study-of-low-power-wireless-29ojyftuzz.pdf

An empirical study of low-power wireless

In one aspect there is provided a method. The method may include receiving a first analog radio frequency signal including a signal of interest and an interference signal caused by a second analog radio frequency signal transmitted in full duplex over a channel from which the first analog transmission is received; combining the first analog radio frequency signal and a portion of the second analog radio frequency signal to generate an output analog radio frequency signal characterized by at least a reduction or an elimination of the interference signal included in the output analog radio frequency signal; and providing the output analog radio frequency signal. Related apparatus, systems, methods, and articles are also described.

Single channel full duplex wireless communications

Measuring 802.15.4 reception in three testbeds, we find that most intermediate links are bursty: they shift between poor and good delivery. We present a metric to measure this link burstiness and name it β. We find that link burstiness affects protocol performance and that β can predict the effects. We show that measuring β allows us to reason about how long a protocol should pause after encountering a packet failure to reduce its transmission cost. We find that using β as a guide to setting a single constant in a standard sensor network data collection protocol reduces its average transmission cost by 15%. In addition to data from 802.15.4 testbeds, we examine traces from 802.11b networks and find β has a broader relevance in the wireless domain.

Kannan Srinivasan

Papers

Achieving single channel, full duplex wireless communication

Practical, real-time, full duplex wireless

An empirical study of low-power wireless

Single channel full duplex wireless communications

The β-factor: measuring wireless link burstiness