On September 14, 2015 at 09:50:45 UTC the two detectors of the Laser Interferometer Gravitational-Wave Observatory simultaneously observed a transient gravitational-wave signal. The signal sweeps upwards in frequency from 35 to 250 Hz with a peak gravitational-wave strain of 1.0×10(-21). It matches the waveform predicted by general relativity for the inspiral and merger of a pair of black holes and the ringdown of the resulting single black hole. The signal was observed with a matched-filter signal-to-noise ratio of 24 and a false alarm rate estimated to be less than 1 event per 203,000 years, equivalent to a significance greater than 5.1σ. The source lies at a luminosity distance of 410(-180)(+160)  Mpc corresponding to a redshift z=0.09(-0.04)(+0.03). In the source frame, the initial black hole masses are 36(-4)(+5)M⊙ and 29(-4)(+4)M⊙, and the final black hole mass is 62(-4)(+4)M⊙, with 3.0(-0.5)(+0.5)M⊙c(2) radiated in gravitational waves. All uncertainties define 90% credible intervals. These observations demonstrate the existence of binary stellar-mass black hole systems. This is the first direct detection of gravitational waves and the first observation of a binary black hole merger.

/pdf/the-observation-of-gravitational-waves-from-a-binary-black-58srpupgg9.pdf

The Observation of Gravitational Waves from a Binary Black Hole Merger

Graphene and other two-dimensional materials, such as transition metal dichalcogenides, have rapidly established themselves as intriguing building blocks for optoelectronic applications, with a strong focus on various photodetection platforms The versatility of these material systems enables their application in areas including ultrafast and ultrasensitive detection of light in the ultraviolet, visible, infrared and terahertz frequency ranges These detectors can be integrated with other photonic components based on the same material, as well as with silicon photonic and electronic technologies Here, we provide an overview and evaluation of state-of-the-art photodetectors based on graphene, other two-dimensional materials, and hybrid systems based on the combination of different two-dimensional crystals or of two-dimensional crystals and other (nano)materials, such as plasmonic nanoparticles, semiconductors, quantum dots, or their integration with (silicon) waveguides

http://www-g.eng.cam.ac.uk/nms/publications/pdf/nnano.2014.215.pdf

Photodetectors based on graphene, other two-dimensional materials and hybrid systems

The electronic and optical properties and the recent progress in applications of 2D semiconductor transition metal dichalcogenides with emphasis on strong excitonic effects, and spin- and valley-dependent properties are reviewed. Recent advances in the development of atomically thin layers of van der Waals bonded solids have opened up new possibilities for the exploration of 2D physics as well as for materials for applications. Among them, semiconductor transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se), have bandgaps in the near-infrared to the visible region, in contrast to the zero bandgap of graphene. In the monolayer limit, these materials have been shown to possess direct bandgaps, a property well suited for photonics and optoelectronics applications. Here, we review the electronic and optical properties and the recent progress in applications of 2D semiconductor transition metal dichalcogenides with emphasis on strong excitonic effects, and spin- and valley-dependent properties.

Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

/pdf/science-and-technology-roadmap-for-graphene-related-two-4q9m7czlkc.pdf

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

The optical properties of graphene and emerging two-dimensional materials including transition metal dichalcogenides are reviewed with an emphasis on nanophotonic applications. Two-dimensional materials exhibit diverse electronic properties, ranging from insulating hexagonal boron nitride and semiconducting transition metal dichalcogenides such as molybdenum disulphide, to semimetallic graphene. In this Review, we first discuss the optical properties and applications of various two-dimensional materials, and then cover two different approaches for enhancing their interactions with light: through their integration with external photonic structures, and through intrinsic polaritonic resonances. Finally, we present a narrow-bandgap layered material — black phosphorus — that serendipitously bridges the energy gap between the zero-bandgap graphene and the relatively large-bandgap transition metal dichalcogenides. The plethora of two-dimensional materials and their heterostructures, together with the array of available approaches for enhancing the light–matter interaction, offers the promise of scientific discoveries and nanophotonics technologies across a wide range of the electromagnetic spectrum.

Two-dimensional material nanophotonics

A CMOS-compatible photodetector based on graphene with multi-gigahertz operation ranging from the O- to U-band of telecommunication bands is demonstrated, highlighting the promise of graphene as a new material for integrated photonics.

https://www.iap.uni-jena.de/iapmedia/de/Lecture/Nanomaterials1367272800/NanoMat13_Paper_06.pdf

CMOS-compatible graphene photodetector covering all optical communication bands

Ultra-short pulses are an attractive way of expanding today’s terahertz time-domain systems toward frequencies above 2 THz, and moreover mode control enables reliable generation of terahertz frequency combs based on quantum cascade lasers. We report on a waveguide engineering technique that enables the generation of a bandwidth up to ∼1  THz and an ultra-short pulse length of 2.5 ps in injection-seeded terahertz quantum cascade lasers. The reported technique is able to control and fully suppress higher order lateral modes in broadband terahertz quantum cascade lasers by introducing side-absorbers to metal–metal waveguides. The side-absorbers consist of a top metallization setback with respect to the laser ridge and an additional lossy metal layer. In continuous wave operation, the side-absorbers lead to octave-spanning laser emission, ranging from 1.63 to 3.37 THz, exhibiting a 725 GHz wide flat top within a 10 dB intensity range, as well as frequency comb operation with a bandwidth of 442 GHz. Numerical and experimental studies have been performed to optimize the impact of the side-absorbers on the emission properties and to determine the required increase of waveguide losses. Furthermore, these studies have led to a better understanding of the pulse formation dynamics of injection-seeded quantum cascade lasers.

Short pulse generation and mode control of broadband terahertz quantum cascade lasers

Abstract We report on a heterogeneous active region design for terahertz quantum cascade laser based frequency combs. Dynamic range, spectral bandwidth and output power have been significantly improved with respect to previous designs. When individually operating the lasers, narrow and stable intermode beatnote indicate frequency comb operation up to a spectral bandwidth of 1.1 THz, while in a dispersion-dominated regime a bandwidth up to 1.94 THz at a center frequency of 3 THz can be reached. A self-detected dual-comb setup has been used to verify the frequency comb nature of the lasers.

Heterogeneous terahertz quantum cascade lasers exceeding 1.9 THz spectral bandwidth and featuring dual comb operation

We report on a heterogeneous active region design for terahertz quantum cascade laser based frequency combs. Dynamic range, spectral bandwidth as well as output power have been significantly improved with respect to previous designs. When operating individually the lasers act as a frequency comb up to a spectral bandwidth of 1.1 THz, while in a dispersed regime a bandwidth up to 1.94 THz at a center frequency of 3 THz can be reached. A self-detected dual-comb setup has been used to verify the frequency comb nature of the lasers.

Ultra-broadband quantum cascade laser operating from 1.88 to 3.82 THz

We report on a waveguide engineering technique that enables the generation of a bandwidth up to 1 THz and record ultra-short pulse length of 2.5 ps in injection seeded terahertz quantum cascade lasers. The reported technique is able to control and fully suppress higher order lateral modes in broadband terahertz quantum cascade lasers by introducing side-absorbers to metal-metal waveguides. The side-absorbers consist of a top metalization set-back with respect to the laser ridge and an additional lossy metal layer. In continuous wave operation the side-absorbers lead to octave spanning laser emission, ranging from 1.63 to 3.37 THz, exhibiting a 725 GHz wide at top within a 10 dB intensity range as well as frequency comb operation with a bandwidth of 442 GHz. Numerical and experimental studies have been performed to optimize the impact of the side-absorbers on the emission properties and to determine the required increase of waveguide losses. Furthermore, these studies have led to a better understanding of the pulse formation dynamics of injection-seeded quantum cascade lasers.

Dominic Bachmann

Papers

CMOS-compatible graphene photodetector covering all optical communication bands

Short pulse generation and mode control of broadband terahertz quantum cascade lasers

Heterogeneous terahertz quantum cascade lasers exceeding 1.9 THz spectral bandwidth and featuring dual comb operation

Ultra-broadband quantum cascade laser operating from 1.88 to 3.82 THz

Short pulse generation and mode control of broadband terahertz quantum cascade lasers