다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

Dry (CO2) reforming of methane (DRM) is a well-studied reaction that is of both scientific and industrial importance. This reaction produces syngas that can be used to produce a wide range of products, such as higher alkanes and oxygenates by means of Fischer–Tropsch synthesis. DRM is inevitably accompanied by deactivation due to carbon deposition. DRM is also a highly endothermic reaction and requires operating temperatures of 800–1000 °C to attain high equilibrium conversion of CH4 and CO2 to H2 and CO and to minimize the thermodynamic driving force for carbon deposition. The most widely used catalysts for DRM are based on Ni. However, many of these catalysts undergo severe deactivation due to carbon deposition. Noble metals have also been studied and are typically found to be much more resistant to carbon deposition than Ni catalysts, but are generally uneconomical. Noble metals can also be used to promote the Ni catalysts in order to increase their resistance to deactivation. In order to design catalysts that minimize deactivation, it is necessary to understand the elementary steps involved in the activation and conversion of CH4 and CO2. This review will cover DRM literature for catalysts based on Rh, Ru, Pt, and Pd metals. This includes the effect of these noble metals on the kinetics, mechanism and deactivation of these catalysts.

A review of dry (CO2) reforming of methane over noble metal catalysts

This review surveys recent advances in the applications of layered double hydroxides (LDHs) in heterogeneous catalysis. By virtue of the flexible tunability and uniform distribution of metal cations in the brucite-like layers and the facile exchangeability of intercalated anions, LDHs-both as directly prepared or after thermal treatment and/or reduction-have found many applications as stable and recyclable heterogeneous catalysts or catalyst supports for a variety of reactions with high industrial and academic importance. A major challenge in this rapidly growing field is to simultaneously improve the activity, selectivity and stability of these LDH-based materials by developing ways of tailoring the electronic structure of the catalysts and supports. Therefore, this Review article is mainly focused on the most recent developments in smart design strategies for LDH materials and the potential catalytic applications of the resulting materials.

Catalytic applications of layered double hydroxides: recent advances and perspectives

Hydrogen is considered to be the most viable energy carrier for the future. Producing hydrogen from ethanol steam reforming would not only be environmentally friendly but also would open new opportunities for utilization of renewable resources, which are globally available. This paper reviews the current state of the steam reforming process of ethanol, examines different catalysts, and, finally, makes a comparative analysis. Different catalysts have been used for the steam reforming of ethanol. Depending on the type of catalysts, reaction conditions, and the catalyst preparation method, ethanol conversion and hydrogen production vary greatly. It was observed that Co/ZnO, ZnO, Rh/Al2O3, Rh/CeO2, and Ni/La2O3−Al2O3 performed the best, in regard to the steam reforming of ethanol. Currently, hydrogen production from ethanol steam reforming is still in the research and development stage.

Current status of hydrogen production techniques by steam reforming of ethanol : A review

It is well known that urbanization and industrialization have resulted in the rapidly increasing emissions of volatile organic compounds (VOCs), which are a major contributor to the formation of secondary pollutants (e.g., tropospheric ozone, PAN (peroxyacetyl nitrate), and secondary organic aerosols) and photochemical smog. The emission of these pollutants has led to a large decline in air quality in numerous regions around the world, which has ultimately led to concerns regarding their impact on human health and general well-being. Catalytic oxidation is regarded as one of the most promising strategies for VOC removal from industrial waste streams. This Review systematically documents the progresses and developments made in the understanding and design of heterogeneous catalysts for VOC oxidation over the past two decades. It addresses in detail how catalytic performance is often drastically affected by the pollutant sources and reaction conditions. It also highlights the primary routes for catalyst deactivation and discusses protocols for their subsequent reactivation. Kinetic models and proposed oxidation mechanisms for representative VOCs are also provided. Typical catalytic reactors and oxidizers for industrial VOC destruction are further discussed. We believe that this Review will provide a great foundation and reference point for future design and development in this field.

/pdf/recent-advances-in-the-catalytic-oxidation-of-volatile-zw2c35dbg7.pdf

Elisabete Moreira Assaf

Papers

High efficiency steam reforming of ethanol by cobalt-based catalysts

Characterization of the activity and stability of supported cobalt catalysts for the steam reforming of ethanol

Production of hydrogen via steam reforming of biofuels on Ni/CeO2–Al2O3 catalysts promoted by noble metals

Ni catalysts with Mo promoter for methane steam reforming

Combination of dry reforming and partial oxidation of methane on NiO–MgO–ZrO2 catalyst: Effect of nickel content