Fogging occurs when moisture condensation takes the form of accumulated droplets with diameters larger than 190 nm or half of the shortest wavelength (380 nm) of visible light. This problem may be effectively addressed by changing the affinity of a material’s surface for water, which can be accomplished via two approaches: i) the superhydrophilic approach, with a water contact angle (CA) less than 5°, and ii) the superhydrophobic approach, with a water CA greater than 150°, and extremely low CA hysteresis. To date, all techniques reported belong to the former category, as they are intended for applications in optical transparent coatings. A well-known example is the use of photocatalytic TiO2 nanoparticle coatings that become superhydrophilic under UV irradiation. Very recently, a capillary effect was skillfully adopted to achieve superhydrophilic properties by constructing 3D nanoporous structures from layer-by-layer assembled nanoparticles. The key to these two “wet”-style antifogging strategies is for micrometer-sized fog drops to rapidly spread into a uniform thin film, which can prevent light scattering and reflection from nucleated droplets. Optical transparency is not an intrinsic property of antifogging coatings even though recently developed antifogging coatings are almost transparent, and the transparency could be achieved by further tuning the nanoparticle size and film thickness. To our knowledge, the antifogging coatings may also be applied to many fields that do not require optical transparency, including, for example, paints for inhibiting swelling and peeling issues and metal surfaces for preventing corrosion. These types of issues, which are caused by adsorption of moisture, are hard to solve by the superhydrophilic approach because of its inherently “wet” nature. Thus, a “dry”-style antifogging strategy, which consists of a novel superhydrophobic technique that can prevent moisture or microscale fog drops from nucleating on a surface, is desired. Recent bionic researches have revealed that the self-cleaning ability of lotus leaves and the striking ability of a water-strider’s legs to walk on water can be attributed to the ideal superhydrophobicity of their surfaces, induced by special microand nanostructures. To date, the biomimetic fabrication of superhydrophobic microand/or nanostructures has attracted considerable interest, and these types of materials can be used for such applications as self-cleaning coatings and stain-resistant textiles. Although a superhydrophobic technique inspired by lotus leaves is expected to be able to solve such fogging problems because the water droplets can not remain on the surface, there are no reports of such antifogging coatings. Very recently, researchers from General Motors have reported that the surfaces of lotus leaves become wet with moisture because the size of the fog drops are at the microscale—so small that they can be easily trapped in the interspaces among micropapillae. Thus, lotuslike surface microstructures are unsuitable for superhydrophobic antifogging coatings, and a new inspiration from nature is desired for solving this problem. In this communication, we report a novel, biological, superhydrophobic antifogging strategy. It was found that the compound eyes of the mosquito C. pipiens possess ideal superhydrophobic properties that provide an effective protective mechanism for maintaining clear vision in a humid habitat. Our research indicates that this unique property is attributed to the smart design of elaborate microand nanostructures: hexagonally non-close-packed (ncp) nipples at the nanoscale prevent microscale fog drops from condensing on the ommatidia surface, and hexagonally close-packed (hcp) ommatidia at the microscale could efficiently prevent fog drops from being trapped in the voids between the ommatidia. We also fabricated artificial compound eyes by using soft lithography and investigated the effects of microand nanostructures on the surface hydrophobicity. These findings could be used to develop novel superhydrophobic antifogging coatings in the near future. It is known that mosquitoes possess excellent vision, which they exploit to locate various resources such as mates, hosts, and resting sites in a watery and dim habitat. To better understand such remarkable abilities, we first investigated the interaction between moisture and the eye surface. An ultrasonic humidifier was used to regulate the relative humidity of the atmosphere and mimic a mist composed of numerous tiny water droplets with diameters less than 10 lm. As the fog was C O M M U N IC A IO N

The dry-style antifogging properties of mosquito compound eyes and artificial analogues prepared by soft lithography: a superhydrophobic state with high adhesive force

Superhydrophobic nanocoatings, a combination of nanotechnology and superhydrophobic surfaces, have received extraordinary attention recently, focusing both on novel preparation strategies and on investigations of their unique properties. In the past few decades, inspired by the lotus leaf, the discovery of nano- and micro-hierarchical structures has brought about great change in the superhydrophobic nanocoatings field. In this paper we review the contributions to this field reported in recent literature, mainly including materials, fabrication and applications. In order to facilitate comparison, materials are divided into 3 categories as follows: inorganic materials, organic materials, and inorganic-organic materials. Each kind of materials has itself merits and demerits, as well as fabrication techniques. The process of each technique is illustrated simply through a few classical examples. There is, to some extent, an association between various fabrication techniques, but many are different. So, it is important to choose appropriate preparation strategies, according to conditions and purposes. The peculiar properties of superhydrophobic nanocoatings, such as self-cleaning, anti-bacteria, anti-icing, corrosion resistance and so on, are the most dramatic. Not only do we introduce application examples, but also try to briefly discuss the principle behind the phenomenon. Finally, some challenges and potential promising breakthroughs in this field are also succinctly highlighted.

Superhydrophobic nanocoatings: from materials to fabrications and to applications

Porphyrins and related families of molecules are important organic modules as has been reflected in the award of the Nobel Prizes in Chemistry in 1915, 1930, 1961, 1962, 1965, and 1988 for work on porphyrin-related biological functionalities. The porphyrin core can be synthetically modified by introduction of various functional groups and other elements, allowing creation of numerous types of porphyrin derivatives. This feature makes porphyrins extremely useful molecules especially in combination with their other interesting photonic, electronic and magnetic properties, which in turn is reflected in their diverse signal input–output functionalities based on interactions with other molecules and external stimuli. Therefore, porphyrins and related macrocycles play a preeminent role in sensing applications involving chromophores. In this review, we discuss recent developments in porphyrin-based sensing applications in conjunction with the new advanced concept of nanoarchitectonics, which creates functional nanostructures based on a profound understanding of mutual interactions between the individual nanostructures and their arbitrary arrangements. Following a brief explanation of the basics of porphyrin chemistry and physics, recent examples in the corresponding fields are discussed according to a classification based on physical modes of detection including optical detection (absorption/photoluminescence spectroscopy and energy and electron transfer processes), other spectral modes (circular dichroism, plasmon and nuclear magnetic resonance), electronic and electrochemical modes, and other sensing modes.

Porphyrin-based sensor nanoarchitectonics in diverse physical detection modes

Biomimetic nanosurfaces with distinct wettability and versatility have found special enthusiasm in both fundamental research and industrial applications. With the advent of nanotechnology, it is doable to acclimate surface architecture and surface chemistry to attain superhydrophobicity. The uniqueness of superhydrophobic surfaces arises from various phenomenal advances, and its progress is expected to continue for decades in the future. In this Review Article, we discuss recent progress made in defining physical aspects of numerical modeling, experimental practices adopted, and applications of superhydrophobic surfaces. First, we revisit various classical models of superhydrophobicity and recent theoretical advances achieved related to the wetting phenomena. Subsequently, we emphasize various precursors and advance fabrication strategies adopted to fabricate superhydrophobic surfaces. In the following section, we take up various potential applications and appropriate working principles to explain wettability phenomena. Finally, some general conclusions are drawn along with proposed guidelines for designing robust superhydrophobic coatings.

Superhydrophobic Surfaces: Insights from Theory and Experiment.

Superhydrophobic surfaces with tunable water adhesion have attracted much interest in fundamental research and practical applications. In this paper, we used a simple method to fabricate superhydrophobic surfaces with tunable water adhesion. Periodic microstructures with different topographies were fabricated on copper surface via femtosecond (fs) laser irradiation. The topography of these microstructures can be controlled by simply changing the scanning speed of the laser beam. After surface chemical modification, these as-prepared surfaces showed superhydrophobicity combined with different adhesion to water. Surfaces with deep microstructures showed self-cleaning properties with extremely low water adhesion, and the water adhesion increased when the surface microstructures became flat. The changes in surface water adhesion are attributed to the transition from Cassie state to Wenzel state. We also demonstrated that these superhydrophobic surfaces with different adhesion can be used for transferring smal...

Superhydrophobic surfaces fabricated by femtosecond laser with tunable water adhesion: from lotus leaf to rose petal.

Bioinspired special wettibilities including superhydrophobicity and tunable adhesive force have drawn considerable attention because of their significant potential for fundamental research and practical applications. This review summarizes recent progress in the development of bioinspired wetting surfaces via laser microfabrication, with a focus on controllable, biomimetic, and switchable wetting surfaces, as well as their applications in biology, microfluidic, and paper-based devices, all of which demonstrate the ability of laser microfabrication in producing various multiscale structures and its adaptation in a great variety of materials. In particular, compared to other techniques, laser microfabrication can realize special modulation ranging from superhydrophilic to superhydrophobic without the assistance of fluorination, allowing much more freedom to achieve complex multiple-wettability integration. The current challenges and future research prospects of this rapidly developing field are also being d...

Bioinspired Wetting Surface via Laser Microfabrication

We present a rapid, facile, and simple method to realize superhydrophobic patterned polydimethylsiloxane (PDMS) surfaces with tunable adhesion by a femtosecond laser. These surfaces are composed of superhydrophobic laser-induced structures and hydrophobic unstructured square array. The femtosecond laser structured domain shows superhydrophobicity with ultralow water adhesion, while the nonstructured flat PDMS shows ordinary hydrophobicity with ultrahigh water adhesion. By adjusting the relative area fraction of laser structured and nonstructured domains, the as-prepared superhydrophobic surfaces show tunable water adhesion that ranges from ultralow to ultrahigh, on which the sliding angle can be controlled from 1° to 90° (a water droplet cannot slide down even when the as-prepared surface is vertical or turned upside down). The tunable adhesive superhydrophobic surfaces achieved by femtosecond laser microfabrication may be potentially used in microfluidic systems to modulate the mobility of liquid droplets.

Femtosecond Laser Weaving Superhydrophobic Patterned PDMS Surfaces with Tunable Adhesion

A fast and single-step process is developed for the fabrication of low-cost, high-quality, and large-area concave microlens arrays (MLAs) by the high-speed line-scanning of femtosecond laser pulses. Each concave microlens can be generated by a single laser pulse, and over 2.78 million microlenses were fabricated on a 2 × 2 cm2 polydimethylsiloxane (PDMS) sheet within 50 min, which greatly enhances the processing efficiency compared to the classical laser direct writing method. The mechanical pressure induced by the expansion of the laser-induced plasmas as well as a long resolidifing time is the reason for the formation of smooth concave spherical microstructures. We show that uniform microlenses with different diameters and depths can be controlled by adjusting the power of laser pulses. Their high-quality optical performance is also demonstrated in this work.

Rapid fabrication of large-area concave microlens arrays on PDMS by a femtosecond laser.

Superhydrophobic PDMS surfaces with three-dimensional (3D) pattern-dependent controllable adhesion

In nature, a frog can easily rest on a lotus leaf even though the frog’s weight is several times the weight of the lotus leaf. Inspired by the lotus leaf, we fabricated a planar superhydrophobic microboat (SMB) with a superhydrophobic upper surface on a PDMS sheet which was irradiated by a focused femtosecond laser. The SMB can not only float effortlessly over the water surface but can also hold up some heavy objects, exhibiting an excellent loading capacity. The water surface is curved near the edge of the upper surface and the SMB’s upper edge is below the water level, greatly enhancing the displacement. Experimental results and theoretical analysis demonstrate that the superhydrophobicity on the edge of the upper surface is responsible for the SMB’s large loading capacity. Here, we call it the ‘superhydrophobic edge effect’.

https://iopscience.iop.org/article/10.1088/0960-1317/24/3/035006/pdf

Feng Yun

Papers

Bioinspired Wetting Surface via Laser Microfabrication

Femtosecond Laser Weaving Superhydrophobic Patterned PDMS Surfaces with Tunable Adhesion

Rapid fabrication of large-area concave microlens arrays on PDMS by a femtosecond laser.

Superhydrophobic PDMS surfaces with three-dimensional (3D) pattern-dependent controllable adhesion

A bioinspired planar superhydrophobic microboat