In this critical review, metal oxides-based materials for electrochemical supercapacitor (ES) electrodes are reviewed in detail together with a brief review of carbon materials and conducting polymers. Their advantages, disadvantages, and performance in ES electrodes are discussed through extensive analysis of the literature, and new trends in material development are also reviewed. Two important future research directions are indicated and summarized, based on results published in the literature: the development of composite and nanostructured ES materials to overcome the major challenge posed by the low energy density of ES (476 references).

/pdf/a-review-of-electrode-materials-for-electrochemical-2cok5em0bo.pdf

A review of electrode materials for electrochemical supercapacitors

The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Ultracapacitors: Why, How, and Where is the Technology

Electrical energy storage (EES) is one of the most critical areas of technological research around the world. Storing and efficiently using electricity generated by intermittent sources and the transition of our transportation fleet to electric drive depend fundamentally on the development of EES systems with high energy and power densities. Supercapacitors are promising devices for highly efficient energy storage and power management, yet they still suffer from moderate energy densities compared to batteries. To establish a detailed understanding of the science and technology of carbon/carbon supercapacitors, this review discusses the basic principles of the electrical double-layer (EDL), especially regarding the correlation between ion size/ion solvation and the pore size of porous carbon electrodes. We summarize the key aspects of various carbon materials synthesized for use in supercapacitors. With the objective of improving the energy density, the last two sections are dedicated to strategies to increase the capacitance by either introducing pseudocapacitive materials or by using novel electrolytes that allow to increasing the cell voltage. In particular, advances in ionic liquids, but also in the field of organic electrolytes, are discussed and electrode mass balancing is expanded because of its importance to create higher performance asymmetric electrochemical capacitors.

Carbons and Electrolytes for Advanced Supercapacitors

Ongoing technological advances in diverse fields including portable electronics, transportation, and green energy are often hindered by the insufficient capability of energy-storage devices By taking advantage of two different electrode materials, asymmetric supercapacitors can extend their operating voltage window beyond the thermodynamic decomposition voltage of electrolytes while enabling a solution to the energy storage limitations of symmetric supercapacitors This review provides comprehensive knowledge to this field We first look at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area Then we move to the recent progress made for the design and fabrication of electrode materials and the overall structure of asymmetric supercapacitors in different categories We also highlight several key scientific challenges and present our perspectives on enhancing the electrochemical performance of future asymmetric supercapacitors

Design and Mechanisms of Asymmetric Supercapacitors.

Carbon-based supercapacitors can provide high electrical power, but they do not have sufficient energy density to directly compete with batteries. We found that a nitrogen-doped ordered mesoporous few-layer carbon has a capacitance of 855 farads per gram in aqueous electrolytes and can be bipolarly charged or discharged at a fast, carbon-like speed. The improvement mostly stems from robust redox reactions at nitrogen-associated defects that transform inert graphene-like layered carbon into an electrochemically active substance without affecting its electric conductivity. These bipolar aqueous-electrolyte electrochemical cells offer power densities and lifetimes similar to those of carbon-based supercapacitors and can store a specific energy of 41 watt-hours per kilogram (19.5 watt-hours per liter).

http://science.sciencemag.org/content/sci/350/6267/1508.full.pdf

Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage

Theoretical and experimental specific capacitance of polyaniline in sulfuric acid

Polyaniline (PANI) nanostructures with sheets-, fiber- and spherical-like morphologies were synthesized from p-toluene sulfonic acid (p-TSA) aqueous solution. The results demonstrate that the morphology of PANI nanostructures was significantly influenced by the molar ratio of aniline to p-TSA. Other experimental parameters, such as polymerization temperature and the concentration of ammonium peroxydisulfate (APS), also have an influence on the morphology of PANI nanostructures. A rational mechanism based on the self-assembly of micelles is proposed for the formation of PANI nanostructures. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR), UV–visible spectroscopy (UV–vis) and X-ray diffraction (XRD) were applied to characterize the products.

Fengbao Zhang

Papers

Theoretical and experimental specific capacitance of polyaniline in sulfuric acid

A novel strategy for the synthesis of polyaniline nanostructures with controlled morphology

Functionalized anodic aluminum oxide (AAO) membranes for affinity protein separation

Bilirubin removal by Cibacron Blue F3GA attached nylon-based hydrophilic affinity membrane

Adsorption of bilirubin with polylysine carrying chitosan-coated nylon affinity membranes.