2.3. Evaluation of Photocatalytic Water Splitting 6507 2.3.1. Photocatalytic Activity 6507 2.3.2. Photocatalytic Stability 6507 3. UV-Active Photocatalysts for Water Splitting 6507 3.1. d0 Metal Oxide Photocatalyts 6507 3.1.1. Ti-, Zr-Based Oxides 6507 3.1.2. Nb-, Ta-Based Oxides 6514 3.1.3. W-, Mo-Based Oxides 6517 3.1.4. Other d0 Metal Oxides 6518 3.2. d10 Metal Oxide Photocatalyts 6518 3.3. f0 Metal Oxide Photocatalysts 6518 3.4. Nonoxide Photocatalysts 6518 4. Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting 6519

Semiconductor-based Photocatalytic Hydrogen Generation

Semiconductor photocatalysis has received much attention as a potential solution to the worldwide energy shortage and for counteracting environmental degradation. This article reviews state-of-the-art research activities in the field, focusing on the scientific and technological possibilities offered by photocatalytic materials. We begin with a survey of efforts to explore suitable materials and to optimize their energy band configurations for specific applications. We then examine the design and fabrication of advanced photocatalytic materials in the framework of nanotechnology. Many of the most recent advances in photocatalysis have been realized by selective control of the morphology of nanomaterials or by utilizing the collective properties of nano-assembly systems. Finally, we discuss the current theoretical understanding of key aspects of photocatalytic materials. This review also highlights crucial issues that should be addressed in future research activities.

Nano‐photocatalytic Materials: Possibilities and Challenges

This feature article summarizes recent research on and development of semiconductor-based photocatalyst materials that are applicable to environmental remediation and/or chemical synthesis purposes. A wide variety of TiO2 particles and/or films have been studied during the past 30 years because they are the most stable and powerful photocatalysts leading to the degradation of various organic pollutants. The photocatalytic performance of other semiconductor materials such as ZnO, SnO2, WO3, Fe2O3 and CdS has also been intensively investigated. A general limitation in the efficiency of any photocatalytic process is the recombination of the photogenerated charge carriers, i.e., of electrons and holes, following bandgap illumination. Considerable efforts have been made to suppress this recombination and hence to enhance the charge carrier separation and the overall efficiency by means of coupling of different semiconductors with desirable matching of their electronic band structures, or incorporation of noble metal nanoclusters onto the surface of semiconductor photocatalyst particles. Modification of the physicochemical properties, such as particle size, surface area, porosity and/or crystallinity of the semiconductor materials, and optimization of the experimental conditions, such as pH, illumination conditions and/or catalyst loading, during photocatalytic reactions have also been carefully addressed to achieve high reaction rates or yields. To utilize solar energy more efficiently, i.e., to extend the optical absorption of the mostly UV-sensitive photocatalysts into the visible light range, numerous research groups have contributed to the development of novel visible light active photocatalysts. With the application of semiconductors with narrower bandgaps such as CdS, Fe2O3 and WO3 being straightforward choices, doping of wide bandgap semiconductors like TiO2 has been the most popular technique to enhance the catalysts' optical absorption abilities. Research on mixed-oxide-based semiconductor photocatalysts with deliberately modulated band structures has also attracted tremendous attention in the past decade, concentrating on, for example, the generation of H2 and/or O2 from H2O splitting, and the degradation of organic pollutants under visible light irradiation. Both theoretical calculations and experimental results have convincingly shown that the developed materials can serve as highly efficient photocatalysts that are both environmentally and economically significant.

/pdf/photoelectrocatalytic-materials-for-environmental-5a6vgzcsl4.pdf

Photoelectrocatalytic materials for environmental applications

https://iris.unipa.it/bitstream/10447/74239/1/Di%20Paola-J%20hzardous%20mater%202012-survey.pdf

A survey of photocatalytic materials for environmental remediation.

Photocatalysis is a green technology which converts abundantly available photonic energy into useful chemical energy. With a rapid rise of flow photoreactors in the last decade, the design and development of novel semiconductor photocatalysts is happening at a blistering rate. Currently, developed synthetic approaches have allowed the design of diverse modified/unmodified semiconductor materials exhibiting enhanced performances in heterogeneous photocatalysis. In this review, we have classified the so far reported highly efficient modified/unmodified semiconductor photocatalysts into four different categories based on the elemental composition, band gap engineering and charge carrier migration mechanism in composite photocatalysts. The recent synthetic developments are reported for each novel semiconductor photocatalyst within the four different categories, namely: pure semiconductors, solid solutions, type-II heterojunction nanocomposites and Z-scheme. The motivation behind the synthetic upgrading of modified/unmodified (pure) semiconductor photocatalysts along with their particular photochemical applications and photoreactor systems have been thoroughly reviewed.

/pdf/nanostructured-materials-for-photocatalysis-54b0fo6szc.pdf

Nanostructured materials for photocatalysis

Enhanced activity of mesoporous Nb2O5 for photocatalytic hydrogen production

The photooxidations of five typical polycyclic aromatic hydrocarbons (PAHs) were investigated by using tantalum oxynitride and Pt-tantalum oxynitride as visible light-driven photocatalysts. The electron paramagnetic resonance spin-trap technique and hydrogen peroxide test strip were used to monitor active species formed in these photocatalytic systems. Moreover, the participations of HO•, O2−• anions, and holes were further examined by adding their scavengers t-butanol, benzoquinone, and iodine anions, respectively. The reaction intermediates were analyzed by gas chromatography−mass spectrometer (GC−MS). The results show that tantalum oxynitride exhibits good photocatalytic activity for the PAHs photodegradation and the activity is greatly promoted by loading cocatalyst Pt. After 6 h visible light irradiation, phenanthrene, anthracene, benzo[a]anthracene, and acenaphthene can be completely oxidized over Pt-tantalum oxynitride. Under UV light irradiation, the photodegradation rate of PHE over Pt-tantalum o...

Visible-Light-Induced Photocatalytic Oxidation of Polycyclic Aromatic Hydrocarbons over Tantalum Oxynitride Photocatalysts

A novel photocatalyst, AgAlO2, was prepared by cation exchange reaction and characterized by powder X-ray diffraction. The result showed AgAlO2 crystallizes in the layered orthorhombic structure with space group was Pna21. The energy band and electronic structures of AgAlO2 were calculated based on the crystal structure. It was found that AgAlO2 is an indirect band gap semiconductor. The valence band top mainly consists of O-2p orbitals and Ag-4d orbitals and the conduction band bottom is mainly constructed of Ag-5s5p orbitals. The band gap of AgAlO2 was estimated to be about 2.8(1) eV with UV−vis diffuse reflectance spectrometry. The photocatalytic activity of AgAlO2 was characterized by photocatalytically decomposing the dye alizarin red (AR) under visible light irradiation, and AR could be decomposed about 70% under 2 h of visible light irradiation.

Electronic Structure and Photocatalytic Characterization of a Novel Photocatalyst AgAlO2

In this paper, sensitized ZnS with visible light driven photocatlytic ability was successfully prepared. The obtained ZnS was characterized by x-ray diffraction, UV–visible diffuse reflectance spectra and Fourier transform infrared spectra. The photocatalytic property of the prepared ZnS was evaluated by decomposing methyl orange (MO). These sensitized ZnS powders with a proper molar ratio showed higher photocatalytic activity than TiO2(P25) under visible light (λ > 420 nm) irradiation. A possible explanation for the visible light activity of the prepared ZnS was proposed.

http://iopscience.iop.org/article/10.1088/0022-3727/40/21/054/pdf

Haitao Zhang

Papers

Enhanced activity of mesoporous Nb2O5 for photocatalytic hydrogen production

Visible-Light-Induced Photocatalytic Oxidation of Polycyclic Aromatic Hydrocarbons over Tantalum Oxynitride Photocatalysts

Electronic Structure and Photocatalytic Characterization of a Novel Photocatalyst AgAlO2

Preparation of sensitized ZnS and its photocatalytic activity under visible light irradiation

Preparation of Fe2O3/SrTiO3 composite powders and their photocatalytic properties