Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Driven by functionality and purity demand for applications of inorganic nanoparticle colloids in optics, biology, and energy, their surface chemistry has become a topic of intensive research interest. Consequently, ligand-free colloids are ideal reference materials for evaluating the effects of surface adsorbates from the initial state for application-oriented nanointegration purposes. After two decades of development, laser synthesis and processing of colloids (LSPC) has emerged as a convenient and scalable technique for the synthesis of ligand-free nanomaterials in sealed environments. In addition to the high-purity surface of LSPC-generated nanoparticles, other strengths of LSPC include its high throughput, convenience for preparing alloys or series of doped nanomaterials, and its continuous operation mode, suitable for downstream processing. Unscreened surface charge of LSPC-synthesized colloids is the key to achieving colloidal stability and high affinity to biomolecules as well as support materials,...

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Oil/water separation is a field of high significance as it has direct practical implications for resolving the problem of industrial oily wastewater and other oil/water pollution. Therefore, the development of functional materials for efficient treatment of oil-polluted water is imperative. In this feature article, we have reviewed the recent progress of oil/water separation technologies based on filtration and absorption methods using various materials that possess surface superwetting properties. In each section, we present in detail representative work and describe the concepts, employed materials, fabrication methods, and the effects of their wetting/dewetting behaviors on oil/water separation. Finally, the challenges and future research directions of this promising research field are briefly discussed.

Oil/water separation techniques: a review of recent progresses and future directions

Fogging occurs when moisture condensation takes the form of accumulated droplets with diameters larger than 190 nm or half of the shortest wavelength (380 nm) of visible light. This problem may be effectively addressed by changing the affinity of a material’s surface for water, which can be accomplished via two approaches: i) the superhydrophilic approach, with a water contact angle (CA) less than 5°, and ii) the superhydrophobic approach, with a water CA greater than 150°, and extremely low CA hysteresis. To date, all techniques reported belong to the former category, as they are intended for applications in optical transparent coatings. A well-known example is the use of photocatalytic TiO2 nanoparticle coatings that become superhydrophilic under UV irradiation. Very recently, a capillary effect was skillfully adopted to achieve superhydrophilic properties by constructing 3D nanoporous structures from layer-by-layer assembled nanoparticles. The key to these two “wet”-style antifogging strategies is for micrometer-sized fog drops to rapidly spread into a uniform thin film, which can prevent light scattering and reflection from nucleated droplets. Optical transparency is not an intrinsic property of antifogging coatings even though recently developed antifogging coatings are almost transparent, and the transparency could be achieved by further tuning the nanoparticle size and film thickness. To our knowledge, the antifogging coatings may also be applied to many fields that do not require optical transparency, including, for example, paints for inhibiting swelling and peeling issues and metal surfaces for preventing corrosion. These types of issues, which are caused by adsorption of moisture, are hard to solve by the superhydrophilic approach because of its inherently “wet” nature. Thus, a “dry”-style antifogging strategy, which consists of a novel superhydrophobic technique that can prevent moisture or microscale fog drops from nucleating on a surface, is desired. Recent bionic researches have revealed that the self-cleaning ability of lotus leaves and the striking ability of a water-strider’s legs to walk on water can be attributed to the ideal superhydrophobicity of their surfaces, induced by special microand nanostructures. To date, the biomimetic fabrication of superhydrophobic microand/or nanostructures has attracted considerable interest, and these types of materials can be used for such applications as self-cleaning coatings and stain-resistant textiles. Although a superhydrophobic technique inspired by lotus leaves is expected to be able to solve such fogging problems because the water droplets can not remain on the surface, there are no reports of such antifogging coatings. Very recently, researchers from General Motors have reported that the surfaces of lotus leaves become wet with moisture because the size of the fog drops are at the microscale—so small that they can be easily trapped in the interspaces among micropapillae. Thus, lotuslike surface microstructures are unsuitable for superhydrophobic antifogging coatings, and a new inspiration from nature is desired for solving this problem. In this communication, we report a novel, biological, superhydrophobic antifogging strategy. It was found that the compound eyes of the mosquito C. pipiens possess ideal superhydrophobic properties that provide an effective protective mechanism for maintaining clear vision in a humid habitat. Our research indicates that this unique property is attributed to the smart design of elaborate microand nanostructures: hexagonally non-close-packed (ncp) nipples at the nanoscale prevent microscale fog drops from condensing on the ommatidia surface, and hexagonally close-packed (hcp) ommatidia at the microscale could efficiently prevent fog drops from being trapped in the voids between the ommatidia. We also fabricated artificial compound eyes by using soft lithography and investigated the effects of microand nanostructures on the surface hydrophobicity. These findings could be used to develop novel superhydrophobic antifogging coatings in the near future. It is known that mosquitoes possess excellent vision, which they exploit to locate various resources such as mates, hosts, and resting sites in a watery and dim habitat. To better understand such remarkable abilities, we first investigated the interaction between moisture and the eye surface. An ultrasonic humidifier was used to regulate the relative humidity of the atmosphere and mimic a mist composed of numerous tiny water droplets with diameters less than 10 lm. As the fog was C O M M U N IC A IO N

The dry-style antifogging properties of mosquito compound eyes and artificial analogues prepared by soft lithography: a superhydrophobic state with high adhesive force

This review gives an overview of recent advances in the potential applications of superhydrophobic materials. Such properties are characterized by extremely high water contact angles and various adhesion properties. The conception of superhydrophobic materials has been possible by studying and mimicking natural surfaces. Now, various applications have emerged such as anti-icing, anti-corrosion and anti-bacterial coatings, microfluidic devices, textiles, oil–water separation, water desalination/purification, optical devices, sensors, batteries and catalysts. At least two parameters were found to be very important for many applications: the presence of air on superhydrophobic materials with self-cleaning properties (Cassie–Baxter state) and the robustness of the superhydrophobic properties (stability of the Cassie–Baxter state). This review will allow researchers to envisage new ideas and industrialists to advance in the commercialization of these materials.

Recent advances in the potential applications of bioinspired superhydrophobic materials

Oil‐Water Separation: Oil‐Water Separation: A Gift from the Desert (Adv. Mater. Interfaces 7/2016)

3D integrated coreless microtransformer processed by femtosecond laser micro/nano fabrication

The invention relates to a device and a method capable of realizing oil-water separation. The device comprises a filter container provided with openings in the upper and lower parts, a support filter screen separating the upper and lower parts of the filter screen, a layer of fine sand laid on the support filter screen and a water receiving container arranged below the lower opening of the filter container, wherein the aperture of the support filter screen is smaller than the grain size of the fine sand; the fine sand is water-wet. The method comprises steps as follows: firstly, the fine sand is laid on the filter screen in the filter container provided with the openings in the upper and the lower parts; all the fine sand is wetted with an appropriate amount of water; an oil-water mixture is slowly poured on the fine sand of the filter container from the upper part of a gravity type separation device; water flowing out of the opening in the lower part of the filter container is collected by the water receiving container; a liquid left on the fine sand is oil separated out of the oil-water mixture. The steps are simple, the fine sand is cheap and can be massively used, the oil-water separation efficiency is very high, and environmental pollution cannot be caused.

Device and method capable of realizing oil-water separation

Microlens arrays (MLAs) with special functions such as superhydrophobicity and self-cleaning ability are highly desired in the micro-optical system which is often used in easily polluted environment. In this paper, a new method is demonstrated to fabricate the MLAs with a high fill factor and superhydrophobicity. The method combines femtosecond laser wet etching, polydimethylsiloxane (PDMS) replication and subsequently femtosecond laser direct writing process. The fabricated MLAs decorated with micro/nanoscale hierarchical structures compared with the normal MLAs. Water droplets on the as-prepared surfaces exhibit superhydrophobicity and ultralow adhesion which endows the fabricated samples possess self-cleaning property. The as-fabricated MLAs could find their applications in bioscience research, ocean exploration, endoscopic surgery, microfluidic system, etc.

Hao Bian

Papers

Oil‐Water Separation: Oil‐Water Separation: A Gift from the Desert (Adv. Mater. Interfaces 7/2016)

3D integrated coreless microtransformer processed by femtosecond laser micro/nano fabrication

Device and method capable of realizing oil-water separation

Fabrication of close-packed microlens array with superhydrophobicity and high imaging performance

Infrared Imaging: IR Artificial Compound Eye (Advanced Optical Materials 4/2020)