We present a polarization-sensitive optical coherence-domain reflectometer capable of characterizing the phase retardation between orthogonal linear polarization modes at each reflection point in a birefringent sample. The device is insensitive to the rotation of the sample in the plane perpendicular to ranging. Phase measurement accuracy is ±0.86°, but the reflectometer can distinguish local variations in birefringence as small as 0.05° with a distance resolution of 10.8 μm and a dynamic range of 90 dB. Birefringence-sensitive ranging in a wave plate, an electro-optic modulator, and a calf coronary artery is demonstrated.

Polarization-sensitive low-coherence reflectometer for birefringence characterization and ranging

Terahertz (THz) science and technology have greatly progressed over the past two decades to a point where the THz region of the electromagnetic spectrum is now a mature research area with many fundamental and practical applications. Furthermore, THz imaging is positioned to play a key role in many industrial applications, as THz technology is steadily shifting from university-grade instrumentation to commercial systems. In this context, the objective of this review is to discuss recent advances in THz imaging with an emphasis on the modalities that could enable real-time high-resolution imaging. To this end, we first discuss several key imaging modalities developed over the years: THz transmission, reflection, and conductivity imaging; THz pulsed imaging; THz computed tomography; and THz near-field imaging. Then, we discuss several enabling technologies for real-time THz imaging within the time-domain spectroscopy paradigm: fast optical delay lines, photoconductive antenna arrays, and electro-optic sampling with cameras. Next, we discuss the advances in THz cameras, particularly THz thermal cameras and THz field-effect transistor cameras. Finally, we overview the most recent techniques that enable fast THz imaging with single-pixel detectors: mechanical beam-steering, compressive sensing, spectral encoding, and fast Fourier optics. We believe that this critical and comprehensive review of enabling hardware, instrumentation, algorithms, and potential applications in real-time high-resolution THz imaging can serve a diverse community of fundamental and applied scientists.

Toward real-time terahertz imaging

Active modulation of the polarization states of terahertz light is indispensable for polarization-sensitive spectroscopy, having important applications such as non-contact Hall measurements, vibrational circular dichroism measurements and anisotropy imaging. In the terahertz region, the lack of a polarization modulator similar to a photoelastic modulator in the visible range hampers expansion of such spectroscopy. A terahertz chiral metamaterial has a huge optical activity unavailable in nature; nevertheless, its modulation is still challenging. Here we demonstrate a handedness-switchable chiral metamaterial for polarization modulation employing vertically deformable Micro Electro Mechanical Systems. Vertical deformation of a planar spiral by a pneumatic force creates a three-dimensional spiral. Enantiomeric switching is realized by selecting the deformation direction, where the polarity of the optical activity is altered while maintaining the spectral shape. A polarization rotation as high as 28° is experimentally observed, thus providing a practical and compact polarization modulator for the terahertz range.

/pdf/enantiomeric-switching-of-chiral-metamaterial-for-terahertz-3bp218i95c.pdf

Enantiomeric switching of chiral metamaterial for terahertz polarization modulation employing vertically deformable MEMS spirals

https://iopscience.iop.org/article/10.1088/1361-6463/ab31d5/pdf

A review of terahertz detectors

Glass fiber-reinforced composite laminates in polyetherimide resin have been studied via terahertz imaging and ultrasonic C-scans. The forced delamination is created by inserting Teflon film between various layers inside the samples prior to consolidating the laminates. Using reflective pulsed terahertz imaging, we find high-resolution, low-artifact terahertz C-scan and B-scan images locating and sizing the delamination in three dimensions. Furthermore, terahertz imaging enables us to determine the thicknesses of the delamination and of the layers constituting the laminate. Ultrasonic C-scan images are also successfully obtained; however, in our samples with small thickness-to-wavelength ratio, detailed ultrasonic B-scan images providing quantitative information in depth cannot be obtained by 5 MHz or 10 MHz focused transducers. Comparative analysis between terahertz imaging and ultrasonic C-scans with regard to spatial resolution is carried out demonstrating that terahertz imaging provides higher spatial resolution for imaging, and can be regarded as an alternative or complementary modality to ultrasonic C-scans for this class of glass fiber-reinforced composites.

/pdf/nondestructive-evaluation-of-forced-delamination-in-glass-1pprgtb9ey.pdf

Nondestructive evaluation of forced delamination in glass fiber-reinforced composites by terahertz and ultrasonic waves

We present a practicable way to take advantage of the spectral information contained in a broadband terahertz pulse for the determination of birefringence and orientation of the optical axis in a glass fiber reinforced polymer with a single measurement. Our setup employs circularly polarized terahertz waves and a polarization-sensitive detector to measure both components of the electromagnetic field simultaneously. The anisotropic optical parameters are obtained from an analysis of the phase and frequency resolved components of the terahertz field. This method shows a high tolerance against the skew of the detection axes and is also independent of a reference measurement.

Polarization sensitive terahertz imaging: detection of birefringence and optical axis

In this work, we develop a pulsed terahertz imaging system in reflection geometry, where due to scanning of the terahertz beam neither the sample nor the emitter and detector have to be moved. We use a two mirror galvanoscanner for deflecting the beam, in combination with a single rotationally symmetric focusing lens. In order to efficiently image planar structures, we develop an advanced scanning routine that resolves all bending effects of the imaging plane already during measurement. Thus, the measurement time is reduced, and efficient imaging of surfaces and interfaces becomes possible. We demonstrate the potential of this method in particular for a plastic-metal composite sample, for which non-destructive evaluation of an interface is performed.

Efficient terahertz en-face imaging.

Polarization-sensitive (PS) terahertz (THz) technology can be used for investigating anisotropic materials that are opaque for visible light. A full characterization of an anisotropic material requires the extraction of the birefringence as well as the orientation of the optical axis from the measurement data. We present an approach based on THz time-domain spectroscopy (TDS) that exploits the spectral content of the THz signal for determining these two parameters from only two measurements. In contrast to an earlier approach with a more sophisticated PS-THz system and quasi-circularly polarized THz radiation, now a simple standard THz-TDS system can be employed. After a description of the mathematical model for data analysis we demonstrate the applicability of our method for a lithium niobate crystal and furthermore for a glass-fiber reinforced polymer sample, for which the orientation of the optical axis and birefringence are obtained in a spatially resolved way, showing the potential of the method also for PS-THz imaging. As no specialized setup or components are required, our approach can be easily and extensively applied for the analysis of anisotropic samples at THz frequencies.

Advanced birefringence measurements in standard terahertz time-domain spectroscopy.

A novel and continuous detection scheme for the pulse amplitude and temporal position of a terahertz time domain system is presented. Currently, we have achieved a sampling time of 25 Hz and a resolution of less than 70 fs. The method is therefore very well suited for online measurements in production processes to monitor the thickness and inhomogeneities in the composition of non-conducting materials.

Real-Time Detection of Terahertz Pulse Amplitude and Position

The optical parameters (refractive index, absorption coefficient) of opaque dielectric materials can be measured with terahertz (THz) Time-Domain spectroscopy (TDS). By using a THz beam of known polarization and measuring both components of the transmitted THz field, it is possible to determine the birefringence present in an anisotropic material. In this work we used polarization sensitive (PS) TDS to determine the strain-induced birefringence in stretched elastomers.

Harald Pühringer

Papers

Polarization sensitive terahertz imaging: detection of birefringence and optical axis

Efficient terahertz en-face imaging.

Advanced birefringence measurements in standard terahertz time-domain spectroscopy.

Real-Time Detection of Terahertz Pulse Amplitude and Position

Terahertz-elasticity measurements on elastomers