Journal of Infrared, Millimeter, and Terahertz Waves 

About: Journal of Infrared, Millimeter, and Terahertz Waves is an academic journal published by Springer Science+Business Media. The journal publishes majorly in the area(s): Terahertz radiation & Gyrotron. It has an ISSN identifier of 1866-6892. Over the lifetime, 1469 publications have been published receiving 23123 citations.

A Review on Terahertz Communications Research

Abstract: The increasing demand of unoccupied and unregulated bandwidth for wireless communication systems will inevitably lead to the extension of operation frequencies toward the lower THz frequency range. Higher carrier frequencies will allow for fast transmission of huge amounts of data as needed for new emerging applications. Despite the tremendous hurdles that have to be overcome with regard to sources and detectors, circuit and antenna technology and system architecture to realize ultrafast data transmission in a scenario with extensive transmission loss, a new area of research is beginning to form. In this article we give an overview of emerging technologies and system research that might lead to ubiquitous THz communication systems in the future.

A Review of the Terahertz Conductivity of Bulk and Nano-Materials

Abstract: We review pioneering and recent studies of the conductivity of solid state systems at terahertz frequencies. A variety of theoretical formalisms that describe the terahertz conductivity of bulk, mesoscopic and nanoscale materials are outlined, and their validity and limitations are given. Experimental highlights are discussed from studies of inorganic semiconductors, organic materials (such as graphene, carbon nanotubes and polymers), metallic films and strongly correlated electron systems including superconductors.

Towards THz Communications - Status in Research, Standardization and Regulation

Abstract: In the most recent years, wireless communication networks have been facing a rapidly increasing demand for mobile traffic along with the evolvement of applications that require data rates of several 10s of Gbit/s. In order to enable the transmission of such high data rates, two approaches are possible in principle. The first one is aiming at systems operating with moderate bandwidths at 60 GHz, for example, where 7 GHz spectrum is dedicated to mobile services worldwide. However, in order to reach the targeted date rates, systems with high spectral efficiencies beyond 10 bit/s/Hz have to be developed, which will be very challenging. A second approach adopts moderate spectral efficiencies and requires ultra high bandwidths beyond 20 GHz. Such an amount of unregulated spectrum can be identified only in the THz frequency range, i.e. beyond 300 GHz. Systems operated at those frequencies are referred to as THz communication systems. The technology enabling small integrated transceivers with highly directive, steerable antennas becomes the key challenges at THz frequencies in face of the very high path losses. This paper gives an overview over THz communications, summarizing current research projects, spectrum regulations and ongoing standardization activities.

THz Wave Modulators: A Brief Review on Different Modulation Techniques

Abstract: We review different techniques for modulation of the electromagnetic properties of terahertz (THz) waves. We discuss various approaches for electronic, optical, thermal and nonlinear modulation in distinct material systems such as semiconductors, graphene, pho- tonic crystals and metamaterials. The modulators are classified and compared with respect to modulation speed, modulation depth and categorized by the physical quantity they control as e.g. amplitude, phase, spectrum, spatial and temporal properties of the THz wave. Based on the review paper, the reader should obtain guidelines for the proper choice of a specific modulation technique in view of the targeted application.

State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers

Abstract: This paper presents a review of the experimental achievements related to the development of high-power gyrotron oscillators for long-pulse or CW operation and pulsed gyrotrons for many applications. In addition, this work gives a short overview on the present development status of frequency step-tunable and multi-frequency gyrotrons, coaxial-cavity multi-megawatt gyrotrons, gyrotrons for technological and spectroscopy applications, relativistic gyrotrons, large orbit gyrotrons (LOGs), quasi-optical gyrotrons, fast- and slow-wave cyclotron autoresonance masers (CARMs), gyroklystrons, gyro-TWT amplifiers, gyrotwystron amplifiers, gyro-BWOs, gyro-harmonic converters, gyro-peniotrons, magnicons, free electron masers (FEMs), and dielectric vacuum windows for such high-power mm-wave sources. Gyrotron oscillators (gyromonotrons) are mainly used as high-power millimeter wave sources for electron cyclotron resonance heating (ECRH), electron cyclotron current drive (ECCD), stability control, and diagnostics of magnetically confined plasmas for clean generation of energy by controlled thermonuclear fusion. The maximum pulse length of commercially available 140 GHz, megawatt-class gyrotrons employing synthetic diamond output windows is 30 min (CPI and European KIT-SPC-THALES collaboration). The world record parameters of the European tube are as follows: 0.92 MW output power at 30-min pulse duration, 97.5% Gaussian mode purity, and 44% efficiency, employing a single-stage depressed collector (SDC) for energy recovery. A maximum output power of 1.5 MW in 4.0-s pulses at 45% efficiency was generated with the QST-TOSHIBA (now CANON) 110-GHz gyrotron. The Japan 170-GHz ITER gyrotron achieved 1 MW, 800 s at 55% efficiency and holds the energy world record of 2.88 GJ (0.8 MW, 60 min) and the efficiency record of 57% for tubes with an output power of more than 0.5 MW. The Russian 170-GHz ITER gyrotron obtained 0.99 (1.2) MW with a pulse duration of 1000 (100) s and 53% efficiency. The prototype tube of the European 2-MW, 170-GHz coaxial-cavity gyrotron achieved in short pulses the record power of 2.2 MW at 48% efficiency and 96% Gaussian mode purity. Gyrotrons with pulsed magnet for various short-pulse applications deliver Pout = 210 kW with τ = 20 μs at frequencies up to 670 GHz (η ≅ 20%), Pout = 5.3 kW at 1 THz (η = 6.1%), and Pout = 0.5 kW at 1.3 THz (η = 0.6%). Gyrotron oscillators have also been successfully used in materials processing. Such technological applications require tubes with the following parameters: f > 24 GHz, Pout = 4–50 kW, CW, η > 30%. The CW powers produced by gyroklystrons and FEMs are 10 kW (94 GHz) and 36 W (15 GHz), respectively. The IR FEL at the Thomas Jefferson National Accelerator Facility in the USA obtained a record average power of 14.2 kW at a wavelength of 1.6 μm. The THz FEL (NOVEL) at the Budker Institute of Nuclear Physics in Russia achieved a maximum average power of 0.5 kW at wavelengths 50–240 μm (6.00–1.25 THz).