There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a decade. Recently, friction stir processing (FSP) was developed for microstructural modification of metallic materials. In this review article, the current state of understanding and development of the FSW and FSP are addressed. Particular emphasis has been given to: (a) mechanisms responsible for the formation of welds and microstructural refinement, and (b) effects of FSW/FSP parameters on resultant microstructure and final mechanical properties. While the bulk of the information is related to aluminum alloys, important results are now available for other metals and alloys. At this stage, the technology diffusion has significantly outpaced the fundamental understanding of microstructural evolution and microstructure–property relationships.

/pdf/friction-stir-welding-and-processing-3hu3ejo7ub.pdf

Friction Stir Welding and Processing

[Lu, K.; Lu, L.] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China. [Lu, L.; Suresh, S.] MIT, Sch Engn, Cambridge, MA 02139 USA.;Lu, K (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China;lu@imr.ac.cn ssuresh@mit.edu

/pdf/strengthening-materials-by-engineering-coherent-internal-4fkjmv3btq.pdf

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

Recent advances in friction-stir welding : Process, weldment structure and properties

This article presents an overview of the developments in stainless steels made since the 1990s. Some of the new applications that involve the use of stainless steel are also introduced. A brief introduction to the various classes of stainless steels, their precipitate phases and the status quo of their production around the globe is given first. The advances in a variety of subject areas that have been made recently will then be presented. These recent advances include (1) new findings on the various precipitate phases (the new J phase, new orientation relationships, new phase diagram for the Fe–Cr system, etc.); (2) new suggestions for the prevention/mitigation of the different problems and new methods for their detection/measurement and (3) new techniques for surface/bulk property enhancement (such as laser shot peening, grain boundary engineering and grain refinement). Recent developments in topics like phase prediction, stacking fault energy, superplasticity, metadynamic recrystallisation and the calculation of mechanical properties are introduced, too. In the end of this article, several new applications that involve the use of stainless steels are presented. Some of these are the use of austenitic stainless steels for signature authentication (magnetic recording), the utilisation of the cryogenic magnetic transition of the sigma phase for hot spot detection (the Sigmaplugs), the new Pt-enhanced radiopaque stainless steel (PERSS) coronary stents and stainless steel stents that may be used for magnetic drug targeting. Besides recent developments in conventional stainless steels, those in the high-nitrogen, low-Ni (or Ni-free) varieties are also introduced. These recent developments include new methods for attaining very high nitrogen contents, new guidelines for alloy design, the merits/demerits associated with high nitrogen contents, etc.

Recent developments in stainless steels

The microstructural distribution associated with a hardness profile in a friction-stir-welded, age-hardenable 6063 aluminum alloy has been characterized by transmission electron microscopy (TEM) and orientation imaging microscopy (OIM). The friction-stir process produces a softened region in the 6063 Al weld. Frictional heating and plastic flow during friction-stir welding create fine recrystallized grains in the weld zone and recovered grains in the thermomechanically affected zone. The hardness profile depends greatly on the precipitate distribution and only slightly on the grain size. The softened region is characterized by dissolution and growth of the precipitates during the welding. Simulated weld thermal cycles with different peak temperatures have shown that the precipitates are dissolved at temperatures higher than 675 K and that the density of the strengthening precipitate was reduced by thermal cycles lower than 675 K. A comparison between the thermal cycles and isothermal aging has suggested precipitation sequences in the softened region during friction-stir welding.

Microstructural evolution of 6063 aluminum during friction-stir welding

Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering

The aluminum (Al) alloys 6063-T5 and T4 were friction-stir welded at different tool rotation speeds (R), and then distributions of the microstructure and hardness were examined in these welds. The maximum temperature of the welding thermal cycle rose with increasing R values. The recrystallized grain size of the weld increased exponentially with increasing maximum temperature. The relationship between the grain size and the maximum temperature satisfied the static grain-growth equation. In the as-welded condition, 6063-T5 Al was softened around the weld center, whereas 6063-T4 Al showed homogeneous hardness profiles. Different R values did not result in significant differences in the hardness profile in these welds, except for the width of the softened region in the weld of 6063-T5 Al. Postweld aging raised the hardness in most parts of the welds, but the increase in hardness was small in the stir zone produced at the lower R values. Transmission electron microscope (TEM) observations detected a similar distribution of the strengthening precipitates in the grain interiors and the presence of a precipitation-free zone (PFZ) adjacent to the grain boundaries in all the welds. Microstructural analyses suggested that the small increase in hardness in the stir zone produced at the lower R values was caused by an increase in the volume fraction of PFZs.

Hiroyuki Kokawa

Papers

Microstructural evolution of 6063 aluminum during friction-stir welding

Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering

Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063

Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys

Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test