Hou Junsheng

TL;DR: In this article, the performance of battery thermal management system (BTMS) with phase change material (PCM) and heat pipe (HP) was compared to that of the one with solely HP, find that PCM can effectively reduce the temperature difference in battery pack Then, the influences of the environmental parameters, the parameters of the HP and PCM on system performance are investigated using numerical method.

TL;DR: In this paper, a parallel air-cooled battery thermal management system (BTMS) is proposed to improve the cooling performance of the battery pack by choosing appropriate system parameters such as discharge rate, inlet air temperature, and inlet airflow rate.

TL;DR: In this article, an air cooling system guide plate shape optimization method for battery thermal management is presented. And the method comprises the following steps: starting from uniform main runner sectionwidth distribution, carrying out numerical solution on the cooling runner flow of an air-cooling system, starting from a cooling runner far away from an inlet or an outlet to the direction of the inlet, and selecting the runner section width which enables a system objective function to be optimal by sequentially adjusting each main runners section width; assuming that the section width of each main runner is adjusted once as one

TL;DR: In this paper, a rapid optimization method for a plate type of an inlet guide plate of a battery thermal management air cooling system is presented, based on a given guide plate type, a temperature field is calculated through a numerical method, and the optimal battery pack temperature and the corresponding control point height distribution are recorded in the adjusting process.