Similar to the efforts to move toward electric vehicles, much research has focused on the idea of a more electric aircraft (MEA). The motivations for this research are similar to that for vehicles and include goals to reduce emissions and decrease fuel consumption. In traditional aircraft, multiple systems may use one type or a combination of types of energy, including electrical, hydraulic, mechanical, and pneumatic energy. However, all energy types have different drawbacks, including the sacrifice of total engine efficiency in the process of harvesting a particular energy, as with hydraulic and pneumatic systems. The goal for future aircraft is to replace most of the major systems currently utilizing nonelectric power, such as environmental controls and engine start, with new electrical systems to improve a variety of aircraft characteristics, such as efficiency, emissions, reliability, and maintenance costs. This paper provides an in-depth look into how the systems have—or will be—changed. Future aircraft capabilities such as electric taxi and gas–electric propulsion for aircraft are also included for discussion. Most recent commercial transport aircrafts are described as the current state-of-the-art electric aircraft system. Future goals, including those of NASA, are presented for future advances in MEA.

More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft

Electric, hybrid, and turboelectric fixed-wing aircraft: A review of concepts, models, and design approaches

Superconducting technology applications in electric machines have long been pursued due to their significant advantages of higher efficiency and power density over conventional technology. However, in spite of many successful technology demonstrations, commercial adoption has been slow, presumably because the threshold for value versus cost and technology risk has not yet been crossed. One likely path for disruptive superconducting technology in commercial products could be in applications where its advantages become key enablers for systems which are not practical with conventional technology. To help systems engineers assess the viability of such future solutions, we present a technology roadmap for superconducting machines. The timeline considered was ten years to attain a Technology Readiness Level of 6+, with systems demonstrated in a relevant environment. Future projections, by definition, are based on the judgment of specialists, and can be subjective. Attempts have been made to obtain input from a broad set of organizations for an inclusive opinion. This document was generated Superconductor Science and Technology Supercond. Sci. Technol. 30 (2017) 123002 (41pp) https://doi.org/10.1088/1361-6668/aa833e Original content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. 0953-2048/17/123002+41$33.00 © 2017 IOP Publishing Ltd Printed in the UK 1 through a series of teleconferences and in-person meetings, including meetings at the 2015 IEEE PES General meeting in Denver, CO, the 2015 ECCE in Montreal, Canada, and a final workshop in April 2016 at the University of Illinois, Urbana-Champaign that brought together a broad group of technical experts spanning the industry, government and academia.

https://iopscience.iop.org/article/10.1088/1361-6668/aa833e/pdf

High power density superconducting rotating machines—development status and technology roadmap

Sustainability in the aviation industry calls for aircraft that are significantly quieter and more fuel efficient than today's fleet. Achieving this will require revolutionary new concepts, in particular, electric propulsion. Superconducting machines offer the only viable path to achieve the power densities needed in airborne applications. This paper outlines the main issues involved in using superconductors for aeropropulsion. We review our investigation of the feasibility of superconducting electric propulsion, which integrate for the first time, the multiple disciplines and areas of expertise needed to design electric aircraft. It is shown that superconductivity is clearly the enabling technology for the more efficient turbo-electric aircraft of the future.

Next Generation More-Electric Aircraft: A Potential Application for HTS Superconductors

Challenges of future aircraft propulsion: A review of distributed propulsion technology and its potential application for the all electric commercial aircraft

Meeting NASA's N+3 goals requires a fundamental shift in approach to aircraft and engine design. Material and design improvements allow higher pressure and higher temperature core engines which improve the thermal efficiency. Propulsive efficiency, the other half of the overall efficiency equation, however, is largely determined by the fan pressure ratio (FPR). Lower FPR increases propulsive efficiency, but also dramatically reduces fan shaft speed through the combination of larger diameter fans and reduced fan tip speed limits. The result is that below an FPR of 1.5 the maximum fan shaft speed makes direct drive turbines problematic. However, it is the low pressure ratio fans that allow the improvement in propulsive efficiency which, along with improvements in thermal efficiency in the core, contributes strongly to meeting the N+3 goals for fuel burn reduction. The lower fan exhaust velocities resulting from lower FPRs are also key to meeting the aircraft noise goals. Adding a gear box to the standard turbofan engine allows acceptable turbine speeds to be maintained. However, development of a 50,000+ hp gearbox required by fans in a large twin engine transport aircraft presents an extreme technical challenge, therefore another approach is needed. This paper presents a propulsion system which transmits power from the turbine to the fan electrically rather than mechanically. Recent and anticipated advances in high temperature superconducting generators, motors, and power lines offer the possibility that such devices can be used to transmit turbine power in aircraft without an excessive weight penalty. Moving to such a power transmission system does more than provide better matching between fan and turbine shaft speeds. The relative ease with which electrical power can be distributed throughout the aircraft opens up numerous other possibilities for new aircraft and propulsion configurations and modes of operation. This paper discusses a number of these new possibilities. The Boeing N2 hybrid-wing-body (HWB) is used as a baseline aircraft for this study. The two pylon mounted conventional turbofans are replaced by two wing-tip mounted turboshaft engines, each driving a superconducting generator. Both generators feed a common electrical bus which distributes power to an array of superconducting motor-driven fans in a continuous nacelle centered along the trailing edge of the upper surface of the wing-body. A key finding was that traditional inlet performance methodology has to be modified when most of the air entering the inlet is boundary layer air. A very thorough and detailed propulsion/airframe integration (PAI) analysis is required at the very beginning of the design process since embedded engine inlet performance must be based on conditions at the inlet lip rather than freestream conditions. Examination of a range of fan pressure ratios yielded a minimum Thrust-specific-fuel-consumption (TSFC) at the aerodynamic design point of the vehicle (31,000 ft /Mach 0.8) between 1.3 and 1.35 FPR. We deduced that this was due to the higher pressure losses prior to the fan inlet as well as higher losses in the 2-D inlets and nozzles. This FPR is likely to be higher than the FPR that yields a minimum TSFC in a pylon mounted engine. 1

/pdf/turboelectric-distributed-propulsion-engine-cycle-analysis-7up1rf7ovc.pdf

Turboelectric Distributed Propulsion Engine Cycle Analysis for Hybrid-Wing-Body Aircraft

/pdf/turboelectric-distributed-propulsion-engine-cycle-analysis-1o512c5sut.pdf

Meeting future goals for aircraft and air traffic system performance will require new airframes with more highly integrated propulsion. Previous studies have evaluated hybrid wing body (HWB) configurations with various numbers of engines and with increasing degrees of propulsion-airframe integration. A recently published configuration with 12 small engines partially embedded in a HWB aircraft, reviewed herein, serves as the airframe baseline for the new concept aircraft that is the subject of this paper. To achieve high cruise efficiency, a high lift-to-drag ratio HWB was adopted as the baseline airframe along with boundary layer ingestion inlets and distributed thrust nozzles to fill in the wakes generated by the vehicle. The distributed powered-lift propulsion concept for the baseline vehicle used a simple, high-lift-capable internally blown flap or jet flap system with a number of small high bypass ratio turbofan engines in the airframe. In that concept, the engine flow path from the inlet to the nozzle is direct and does not involve complicated internal ducts through the airframe to redistribute the engine flow. In addition, partially embedded engines, distributed along the upper surface of the HWB airframe, provide noise reduction through airframe shielding and promote jet flow mixing with the ambient airflow. To improve performance and to reduce noise and environmental impact even further, a drastic change in the propulsion system is proposed in this paper. The new concept adopts the previous baseline cruise-efficient short take-off and landing (CESTOL) airframe but employs a number of superconducting motors to drive the distributed fans rather than using many small conventional engines. The power to drive these electric fans is generated by two remotely located gas-turbine-driven superconducting generators. This arrangement allows many small partially embedded fans while retaining the superior efficiency of large core engines, which are physically separated but connected through electric power lines to the fans. This paper presents a brief description of the earlier CESTOL vehicle concept and the newly proposed electrically driven fan concept vehicle, using the previous CESTOL vehicle as a baseline.

https://ntrs.nasa.gov/api/citations/20080021214/downloads/20080021214.pdf

Distributed Turboelectric Propulsion for Hybrid Wing Body Aircraft

Since the introduction of large jet-powered transport aircraft, the majority of these vehicles have been designed by placing thrust-generating engines either under the wings or on the fuselage to minimize aerodynamic interactions on the vehicle operation. However, advances in computational and experimental tools along with new technologies in materials, structures, and aircraft controls, etc. are enabling a high degree of integration of the airframe and propulsion system in aircraft design. The National Aeronautics and Space Administration (NASA) has been investigating a number of revolutionary distributed propulsion vehicle concepts to increase aircraft performance. The concept of distributed propulsion is to fully integrate a propulsion system within an airframe such that the aircraft takes full synergistic benefits of coupling of airframe aerodynamics and the propulsion thrust stream by distributing thrust using many propulsors on the airframe. Some of the concepts are based on the use of distributed jet flaps, distributed small multiple engines, gas-driven multi-fans, mechanically driven multifans, cross-flow fans, and electric fans driven by turboelectric generators. This paper describes some early concepts of the distributed propulsion vehicles and the current turboelectric distributed propulsion (TeDP) vehicle concepts being studied under the NASA s Subsonic Fixed Wing (SFW) Project to drastically reduce aircraft-related fuel burn, emissions, and noise by the year 2030 to 2035.

/pdf/distributed-propulsion-vehicles-1mzm52xqgc.pdf

Distributed Propulsion Vehicles

Purpose – The purpose of this article is to present a summary of recent study results on a turboelectric distributed propulsion vehicle concept named N3-X. Design/methodology/approach – The turboelectric distributed propulsion system uses multiple electric motor-driven propulsors that are distributed on an aircraft. The power to drive these electric propulsors is generated by separately located gas turbine-driven electric generators on the airframe. To estimate the benefits associated with this new propulsion concept, a system analysis was performed on a hybrid-wing-body transport configuration to determine fuel burn (or energy usage), community noise and emissions reductions. Findings – N3-X would be able to reduce energy consumption by 70-72 per cent compared to a reference vehicle, a Boeing 777-200LR, flying the same mission. Predictions for landing and take-off NOX are estimated to be 85 per cent less than the Tier 6-CAEP/6 standard. Two variants of the N3-X vehicle were examined for certification noi...

Hyun Dae Kim

Papers

Turboelectric Distributed Propulsion Engine Cycle Analysis for Hybrid-Wing-Body Aircraft

Turboelectric Distributed Propulsion Engine Cycle Analysis for Hybrid-Wing-Body Aircraft

Distributed Turboelectric Propulsion for Hybrid Wing Body Aircraft

Distributed Propulsion Vehicles

Turboelectric distributed propulsion benefits on the N3-X vehicle