We propose a deep convolutional neural network architecture codenamed Inception that achieves the new state of the art for classification and detection in the ImageNet Large-Scale Visual Recognition Challenge 2014 (ILSVRC14). The main hallmark of this architecture is the improved utilization of the computing resources inside the network. By a carefully crafted design, we increased the depth and width of the network while keeping the computational budget constant. To optimize quality, the architectural decisions were based on the Hebbian principle and the intuition of multi-scale processing. One particular incarnation used in our submission for ILSVRC14 is called GoogLeNet, a 22 layers deep network, the quality of which is assessed in the context of classification and detection.

/pdf/going-deeper-with-convolutions-1yobw2o2ds.pdf

Going deeper with convolutions

Downloading the book in this website lists can give you more advantages. It will show you the best book collections and completed collections. So many books can be found in this website. So, this is not only this multiple view geometry in computer vision. However, this book is referred to read because it is an inspiring book to give you more chance to get experiences and also thoughts. This is simple, read the soft file of the book and you get it.

Multiple View Geometry in Computer Vision.

We present a novel and practical deep fully convolutional neural network architecture for semantic pixel-wise segmentation termed SegNet. This core trainable segmentation engine consists of an encoder network, a corresponding decoder network followed by a pixel-wise classification layer. The architecture of the encoder network is topologically identical to the 13 convolutional layers in the VGG16 network [1] . The role of the decoder network is to map the low resolution encoder feature maps to full input resolution feature maps for pixel-wise classification. The novelty of SegNet lies is in the manner in which the decoder upsamples its lower resolution input feature map(s). Specifically, the decoder uses pooling indices computed in the max-pooling step of the corresponding encoder to perform non-linear upsampling. This eliminates the need for learning to upsample. The upsampled maps are sparse and are then convolved with trainable filters to produce dense feature maps. We compare our proposed architecture with the widely adopted FCN [2] and also with the well known DeepLab-LargeFOV [3] , DeconvNet [4] architectures. This comparison reveals the memory versus accuracy trade-off involved in achieving good segmentation performance. SegNet was primarily motivated by scene understanding applications. Hence, it is designed to be efficient both in terms of memory and computational time during inference. It is also significantly smaller in the number of trainable parameters than other competing architectures and can be trained end-to-end using stochastic gradient descent. We also performed a controlled benchmark of SegNet and other architectures on both road scenes and SUN RGB-D indoor scene segmentation tasks. These quantitative assessments show that SegNet provides good performance with competitive inference time and most efficient inference memory-wise as compared to other architectures. We also provide a Caffe implementation of SegNet and a web demo at http://mi.eng.cam.ac.uk/projects/segnet/ .

SegNet: A Deep Convolutional Encoder-Decoder Architecture for Image Segmentation

Machine Learning is the study of methods for programming computers to learn. Computers are applied to a wide range of tasks, and for most of these it is relatively easy for programmers to design and implement the necessary software. However, there are many tasks for which this is difficult or impossible. These can be divided into four general categories. First, there are problems for which there exist no human experts. For example, in modern automated manufacturing facilities, there is a need to predict machine failures before they occur by analyzing sensor readings. Because the machines are new, there are no human experts who can be interviewed by a programmer to provide the knowledge necessary to build a computer system. A machine learning system can study recorded data and subsequent machine failures and learn prediction rules. Second, there are problems where human experts exist, but where they are unable to explain their expertise. This is the case in many perceptual tasks, such as speech recognition, hand-writing recognition, and natural language understanding. Virtually all humans exhibit expert-level abilities on these tasks, but none of them can describe the detailed steps that they follow as they perform them. Fortunately, humans can provide machines with examples of the inputs and correct outputs for these tasks, so machine learning algorithms can learn to map the inputs to the outputs. Third, there are problems where phenomena are changing rapidly. In finance, for example, people would like to predict the future behavior of the stock market, of consumer purchases, or of exchange rates. These behaviors change frequently, so that even if a programmer could construct a good predictive computer program, it would need to be rewritten frequently. A learning program can relieve the programmer of this burden by constantly modifying and tuning a set of learned prediction rules. Fourth, there are applications that need to be customized for each computer user separately. Consider, for example, a program to filter unwanted electronic mail messages. Different users will need different filters. It is unreasonable to expect each user to program his or her own rules, and it is infeasible to provide every user with a software engineer to keep the rules up-to-date. A machine learning system can learn which mail messages the user rejects and maintain the filtering rules automatically. Machine learning addresses many of the same research questions as the fields of statistics, data mining, and psychology, but with differences of emphasis. Statistics focuses on understanding the phenomena that have generated the data, often with the goal of testing different hypotheses about those phenomena. Data mining seeks to find patterns in the data that are understandable by people. Psychological studies of human learning aspire to understand the mechanisms underlying the various learning behaviors exhibited by people (concept learning, skill acquisition, strategy change, etc.).

Machine learning

[신간의 별자리x] 우리/미술, 그리고 ‘슬픔의 박물관’

We describe how 3D affine measurements may be computed from a single perspective view of a scene given only minimal geometric information determined from the image. This minimal information is typically the vanishing line of a reference plane and a vanishing point for a direction not parallel to the plane. It is shown that affine scene structure may then be determined from the image, without knowledge of the camera's internal calibration (e.g. focal length), nor of the explicit relation between camera and world (pose). In particular we show how to: compute the distance between planes parallel to the reference plane (up to a common scale factor); compute area and length ratios on any plane parallel to the reference plane; determine the camera's (viewer's) location. Simple geometric derivations are given for these results. We also develop an algebraic representation which unifies the three types of measurement and, amongst other advantages, permits a first order error propagation analysis to be performed, associating an uncertainty with each measurement. We demonstrate the technique for a variety of applications, including height measurements in forensic images and 3D graphical modelling from single images.

/pdf/single-view-metrology-4b47v84cbh.pdf

Single view metrology

Describes a method to determine affine and metric calibration for a stereo rig. The method does not involve the use of calibration objects or special motions, but simply a single general motion of the rig with fixed parameters (i.e. camera parameters and relative orientation of the camera pair). The novel aspects of this work are: first, relating the distinguished objects of Euclidean geometry to fixed entities of a Euclidean transformation matrix; second, showing that these fixed entities are accessible from the conjugate Euclidean transformation arising from the projective transformation of the structure under a motion of the fixed stereo rig; and third, a robust and automatic implementation of the method. Results are included of affine and metric calibration and structure recovery using images of real scenes.

Metric calibration of a stereo rig

Standardized benchmarks are crucial for the majority of computer vision applications. Although leaderboards and ranking tables should not be over-claimed, benchmarks often provide the most objective measure of performance and are therefore important guides for research. We present a benchmark for Multiple Object Tracking launched in the late 2014, with the goal of creating a framework for the standardized evaluation of multiple object tracking methods. This paper collects the two releases of the benchmark made so far, and provides an in-depth analysis of almost 50 state-of-the-art trackers that were tested on over 11000 frames. We show the current trends and weaknesses of multiple people tracking methods, and provide pointers of what researchers should be focusing on to push the field forward.

Tracking the Trackers: An Analysis of the State of the Art in Multiple Object Tracking

Recognising objects according to a pre-defined fixed set of class labels has been well studied in the Computer Vision. There are a great many practical applications where the subjects that may be of interest are not known beforehand, or so easily delineated, however. In many of these cases natural language dialog is a natural way to specify the subject of interest, and the task achieving this capability (a.k.a, Referring Expression Comprehension) has recently attracted attention. To this end we propose a unified framework, the ParalleL AttentioN (PLAN) network, to discover the object in an image that is being referred to in variable length natural expression descriptions, from short phrases query to long multi-round dialogs. The PLAN network has two attention mechanisms that relate parts of the expressions to both the global visual content and also directly to object candidates. Furthermore, the attention mechanisms are recurrent, making the referring process visualizable and explainable. The attended information from these dual sources are combined to reason about the referred object. These two attention mechanisms can be trained in parallel and we find the combined system outperforms the state-of-art on several benchmarked datasets with different length language input, such as RefCOCO, RefCOCO+ and GuessWhat?!.

/pdf/parallel-attention-a-unified-framework-for-visual-object-4x0r8694p0.pdf

Parallel Attention: A Unified Framework for Visual Object Discovery Through Dialogs and Queries

We formulate a probabilistic framework for simultaneous region-based 2D segmentation and 2D to 3D pose tracking, using a known 3D model. Given such a model, we aim to maximise the discrimination between statistical foreground and background appearance models, via direct optimisation of the 3D pose parameters. The foreground region is delineated by the zero-level-set of a signed distance embedding function, and we define an energy over this region and its immediate background surroundings based on pixel-wise posterior membership probabilities (as opposed to likelihoods). We derive the differentials of this energy with respect to the pose parameters of the 3D object, meaning we can conduct a search for the correct pose using standard gradient-based non-linear minimisation techniques. We propose novel enhancements at the pixel level based on temporal consistency and improved online appearance model adaptation. Furthermore, straightforward extensions of our method lead to multi-camera and multi-object tracking as part of the same framework. The parallel nature of much of the processing in our algorithm means it is amenable to GPU acceleration, and we give details of our real-time implementation, which we use to generate experimental results on both real and artificial video sequences, with a number of 3D models. These experiments demonstrate the benefit of using pixel-wise posteriors rather than likelihoods, and showcase the qualities, such as robustness to occlusions and motion blur (and also some failure modes), of our tracker.

/pdf/pwp3d-real-time-segmentation-and-tracking-of-3d-objects-2y9d84yqxp.pdf

Ian Reid

Papers

Single view metrology

Metric calibration of a stereo rig

Tracking the Trackers: An Analysis of the State of the Art in Multiple Object Tracking

Parallel Attention: A Unified Framework for Visual Object Discovery Through Dialogs and Queries

PWP3D: Real-time Segmentation and Tracking of 3D Objects.