Recent trends in biodegradable polymers indicate significant developments in terms of novel design strategies and engineering to provide advanced polymers with comparably good performance. However, there are several inadequacies in terms of either technology or cost of production especially in the case of applications in environmental pollution. So, there is a need to have a fresh perspective on the design, properties and functions of these polymers with a view to developing strategies for future developments. The paper reviews the present state-of-art on biodegradable polymers and discusses the salient features of the design and properties of biodegradable polymers. Special emphasis is given to the problems and prospects of (1) approaches adopted to make non-biodegradable synthetic polymers such as polyethylene biodegradable and (2) biodegradable polymers and copolymers made from renewable resources especially poly(lactic acid) based polymers and copolymers which are emerging as the candidate biodegradable materials for the future.

Biodegradable Polymers- A Review on Recent Trends and Emerging Perspectives

Due to the depleting fossil fuel sources such as crude oil, natural gas, and coal, the present rate of economic growth is unsustainable. Therefore, many sources of renewable energy have been exploited, but the potentials of some other sources such as plastics waste are yet to be fully developed as full scale economic activity. Development and modernization have brought about a huge increase in the production of all kinds of plastic commodities, which directly or indirectly generate waste due to their wide range of applications coupled with their versatility of types and relatively low cost. The current scenario of the plastic recycling technology is reviewed in this paper. The aim is to provide the reader with an in-depth analysis with respect to the pyrolysis of plastic waste as obtained in the current recycling technology. As the calorific value of the plastics is comparable to that of hydrocarbon fuel, production of fuel from plastic waste would provide a good opportunity to utilize the waste as a better alternative to dumpsites. Different techniques of converting plastics waste into fuel including thermal and catalytic pyrolysis, microwave-assisted pyrolysis and fluid catalytic cracking are discussed in detail. The co-pyrolysis of plastics waste with biomass is also highlighted. Thus, an attempt was made to address the problem of plastic waste disposal as a partial replacement of the depleting fossil fuel with the hope of promoting a sustainable environment.

Current state and future prospects of plastic waste as source of fuel: A review

The growing use of plastics in agriculture has enabled farmers to increase their crop production. One major drawback of most polymers used in agriculture is the problem with their disposal, following their useful life-time. Non-degradable polymers, being resistive to degradation (depending on the polymer, additives, conditions etc) tend to accumulate as plastic waste, creating a serious problem of plastic waste management. In cases such plastic waste ends-up in landfills or it is buried in soil, questions are raised about their possible effects on the environment, whether they biodegrade at all, and if they do, what is the rate of (bio?)degradation and what effect the products of (bio?)degradation have on the environment, including the effects of the additives used. Possible degradation of agricultural plastic waste should not result in contamination of the soil and pollution of the environment (including aesthetic pollution or problems with the agricultural products safety). Ideally, a degradable polymer should be fully biodegradable leaving no harmful substances in the environment. Most experts and acceptable standards define a fully biodegradable polymer as a polymer that is completely converted by microorganisms to carbon dioxide, water, mineral and biomass, with no negative environmental impact or ecotoxicity. However, part of the ongoing debate concerns the question of what is an acceptable period of time for the biodegradation to occur and how this is measured. Many polymers that are claimed to be ‘biodegradable’ are in fact ‘bioerodable’, ‘hydrobiodegradable’, ‘photodegradable’, controlled degradable or just partially biodegradable. This review paper attempts to delineate the definition of degradability of polymers used in agriculture. Emphasis is placed on the controversial issues regarding biodegradability of some of these polymers.

https://link.springer.com/content/pdf/10.1007%2Fs10924-007-0063-6.pdf

Biodegradation of Agricultural Plastic Films: A Critical Review

Radical reactions of fullerenes: from synthetic organic chemistry to materials science and biology.

Synthetic plastics are pivotal in our current lifestyle and therefore, its accumulation is a major concern for environment and human health. Petroleum-derived (petro-)polymers such as polyethylene (PE), polyethylene terephthalate (PET), polyurethane (PU), polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC) are extremely recalcitrant to natural biodegradation pathways. Some microorganisms with the ability to degrade petro-polymers under in vitro conditions have been isolated and characterized. In some cases, the enzymes expressed by these microbes have been cloned and sequenced. The rate of polymer biodegradation depends on several factors including chemical structures, molecular weights, and degrees of crystallinity. Polymers are large molecules having both regular crystals (crystalline region) and irregular groups (amorphous region), where the latter provides polymers with flexibility. Highly crystalline polymers like polyethylene (95%), are rigid with a low capacity to resist impacts. PET-based plastics possess a high degree of crystallinity (30-50%), which is one of the principal reasons for their low rate of microbial degradation, which is projected to take more than 50 years for complete degraded in the natural environment, and hundreds of years if discarded into the oceans, due to their lower temperature and oxygen availability. The enzymatic degradation occurs in two stages: adsorption of enzymes on the polymer surface, followed by hydro-peroxidation/hydrolysis of the bonds. The sources of plastic-degrading enzymes can be found in microorganisms from various environments as well as digestive intestine of some invertebrates. Microbial and enzymatic degradation of waste petro-plastics is a promising strategy for depolymerization of waste petro-plastics into polymer monomers for recycling, or to covert waste plastics into higher value bioproducts, such as biodegradable polymers via mineralization. The objective of this review is to outline the advances made in the microbial degradation of synthetic plastics and, overview the enzymes involved in biodegradation.

/pdf/microbial-and-enzymatic-degradation-of-synthetic-plastics-12s5r99574.pdf

Ion Mihalcea

Papers

The effect of metals on thermal degradation of polyethylenes

Effects of some antioxidants on the stability of ethylene-propylene elastomers

Chemiluminescence investigation of thermo-oxidative degradation of polyethylenes stabilized with fullerenes

Effect of calixarenes on thermal stability of polyethylenes

Thermo-oxidative behaviour of halobutyl and butyl elastomers