A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance ie, increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability) Furthermore, these nanomaterials can themselves act as transduction elements This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (eg, noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology

A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors.

The detection techniques used in biosensors can be broadly classified into label-based and label-free. Label-based detection relies on the specific properties of labels for detecting a particular target. In contrast, label-free detection is suitable for the target molecules that are not labeled or the screening of analytes which are not easy to tag. Also, more types of label-free biosensors have emerged with developments in biotechnology. The latest developed techniques in label-free biosensors, such as field-effect transistors-based biosensors including carbon nanotube field-effect transistor biosensors, graphene field-effect transistor biosensors and silicon nanowire field-effect transistor biosensors, magnetoelastic biosensors, optical-based biosensors, surface stress-based biosensors and other type of biosensors based on the nanotechnology are discussed. The sensing principles, configurations, sensing performance, applications, advantages and restriction of different label-free based biosensor...

Progress of new label-free techniques for biosensors: a review.

Conducting polymers with defined micro- or nanostructures for drug delivery.

A label-free electrochemical DNA biosensor based on covalent immobilization of salmonella DNA sequences on the nanoporous glassy carbon electrode.

Molybdenum disulfide field-effect transistor biosensor for ultrasensitive detection of DNA by employing morpholino as probe.

We report a successful development of a floating electrode-based DNA sensor with controllable responses. Here, metallic floating electrodes were fabricated to form Schottky barriers between carbon nanotubes and the floating electrodes. We showed that the sensor response could be enhanced by increasing the number of floating electrodes. We also analyzed the response of the sensors based on the Langmuir isotherm theory.

DNA sensors based on CNT-FET with floating electrodes

This paper provides a concise review on the recent development of nanoscale hybrid systems based on carbon nanotubes (CNTs) for biological sensing and control. CNT-based hybrid systems have been intensively studied for versatile applications of biological interfaces such as sensing, cell therapy and tissue regeneration. Recent advances in nanobiotechnology not only enable the fabrication of highly sensitive biosensors at nanoscale but also allow the applications in the controls of cell growth and differentiation. This review describes the fabrication methods of such CNT-based hybrid systems and their applications in biosensing and cell controls.

Nanoscale hybrid systems based on carbon nanotubes for biological sensing and control.

We report a noise mapping strategy for the reliable identification and analysis of noise sources in molecular wire junctions. Here, different molecular wires were patterned on a gold substrate, and the current-noise map on the pattern was measured and analyzed, enabling the quantitative study of noise sources in the patterned molecular wires. The frequency spectra of the noise from the molecular wire junctions exhibited characteristic 1/f2 behavior, which was used to identify the electrical signals from molecular wires. This method was applied to analyze the molecular junctions comprising various thiol molecules on a gold substrate, revealing that the noise in the junctions mainly came from the fluctuation of the thiol bonds. Furthermore, we quantitatively compared the frequencies of such bond fluctuations in different molecular wire junctions and identified molecular wires with lower electrical noise, which can provide critical information for designing low-noise molecular electronic devices. Our method provides valuable insights regarding noise phenomena in molecular wires and can be a powerful tool for the development of molecular electronic devices.

/pdf/direct-mapping-of-electrical-noise-sources-in-molecular-wire-msrc56tmap.pdf

Direct mapping of electrical noise sources in molecular wire-based devices.

We report a switchable biochip strategy where enzymes were entrapped in conducting polymer layers and the enzymatic reaction of the entrapped enzymes was controlled in real-time via electrical stimuli on the polymer layers. This device is named here as a “bio-switch chip” (BSC). We fabricated BSC structures using polypyrrole (Ppy) with entrapped glucose oxidase (GOx) and demonstrated the switching of glucose oxidation reaction in real-time. We found that the introduction of a negative bias voltage on the BSC structure resulted in the enhanced glucose oxidation reaction by more than 20 times than that without a bias voltage. Moreover, because the BSC structures could be fabricated on specific regions, we could control the enzymatic reaction on specific regions. In view of the fact that enzymes enable very useful and versatile biochemical reactions, the ability to control the enzymatic reactions via conventional electrical signals could open up various applications in the area of biochips and other biochemi...

“Bio-switch Chip” Based on Nanostructured Conducting Polymer and Entrapped Enzyme

We developed a magnetically-refreshable receptor platform structure which can be integrated with quite versatile nano-biosensor structures to build reusable nano-biosensor chips. This structure allows one to easily remove used receptor molecules from a biosensor surface and reuse the biosensor for repeated sensing operations. Using this structure, we demonstrated reusable immunofluorescence biosensors. Significantly, since our method allows one to place receptor molecules very close to a nano-biosensor surface, it can be utilized to build reusable carbon nanotube transistor-based biosensors which require receptor molecules within a Debye length from the sensor surface. Furthermore, we also show that a single sensor chip can be utilized to detect two different target molecules simply by replacing receptor molecules using our method. Since this method does not rely on any chemical reaction to refresh sensor chips, it can be utilized for versatile biosensor structures and virtually-general receptor molecular species.

http://iopscience.iop.org/article/10.1088/0957-4484/27/4/045502/pdf

Jae Yeol Park

Papers

DNA sensors based on CNT-FET with floating electrodes

Nanoscale hybrid systems based on carbon nanotubes for biological sensing and control.

Direct mapping of electrical noise sources in molecular wire-based devices.

“Bio-switch Chip” Based on Nanostructured Conducting Polymer and Entrapped Enzyme

Magnetically-refreshable receptor platform structures for reusable nano-biosensor chips.