A fundamental change has been achieved in understanding surface electrochemistry due to the profound knowledge of the nature of electrocatalytic processes accumulated over the past several decades and to the recent technological advances in spectroscopy and high resolution imaging. Nowadays one can preferably design electrocatalysts based on the deep theoretical knowledge of electronic structures, via computer-guided engineering of the surface and (electro)chemical properties of materials, followed by the synthesis of practical materials with high performance for specific reactions. This review provides insights into both theoretical and experimental electrochemistry toward a better understanding of a series of key clean energy conversion reactions including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The emphasis of this review is on the origin of the electrocatalytic activity of nanostructured catalysts toward the aforementioned reactions by correlating the apparent electrode performance with their intrinsic electrochemical properties. Also, a rational design of electrocatalysts is proposed starting from the most fundamental aspects of the electronic structure engineering to a more practical level of nanotechnological fabrication.

Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions

1. Setting the Scope of the Challenge 6474 1.1. The Need for Solar Energy Supply and Storage 6474 1.2. An Imperative for Discovery Research 6477 1.3. Scope of Review 6478 2. Large-Scale Centralized Energy Storage 6478 2.1. Pumped Hydroelectric Energy Storage (PHES) 6479 2.2. Compressed Air Energy Storage (CAES) 6480 3. Smaller Scale Grid and Distributed Energy Storage 6481 3.1. Flywheel Energy Storage (FES) 6481 3.2. Superconducting Magnetic Energy Storage 6482 4. Chemical Energy Storage: Electrochemical 6482 4.1. Batteries 6482 4.1.1. Lead-Acid Batteries 6483 4.1.2. Alkaline Batteries 6484 4.1.3. Lithium-Ion Batteries 6484 4.1.4. High-Temperature Sodium Batteries 6484 4.1.5. Liquid Flow Batteries 6485 4.1.6. Metal-Air Batteries 6485 4.2. Capacitors 6485 5. Chemical Energy Storage: Solar Fuels 6486 5.1. Solar Fuels in Nature 6486 5.2. Artificial Photosynthesis and General Considerations of Water Splitting 6486

Solar Energy Supply and Storage for the Legacy and Nonlegacy Worlds

This paper reviews recent progress made in identifying electrocatalysts for carbon dioxide (CO2) reduction to produce low-carbon fuels, including CO, HCOOH/HCOO−, CH2O, CH4, H2C2O4/HC2O4−, C2H4, CH3OH, CH3CH2OH and others. The electrocatalysts are classified into several categories, including metals, metal alloys, metal oxides, metal complexes, polymers/clusters, enzymes and organic molecules. The catalyts' activity, product selectivity, Faradaic efficiency, catalytic stability and reduction mechanisms during CO2 electroreduction have received detailed treatment. In particular, we review the effects of electrode potential, solution–electrolyte type and composition, temperature, pressure, and other conditions on these catalyst properties. The challenges in achieving highly active and stable CO2 reduction electrocatalysts are analyzed, and several research directions for practical applications are proposed, with the aim of mitigating performance degradation, overcoming additional challenges, and facilitating research and development in this area.

A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels

▪ Abstract Proton-coupled electron transfer (PCET) is an important mechanism for charge transfer in a wide variety of systems including biology- and materials-oriented venues. We review several are...

/pdf/proton-coupled-electron-transfer-3oyvp0w9qd.pdf

Proton-Coupled Electron Transfer

Conversion of carbon dioxide (CO2) to carbon monoxide (CO) and other value-added carbon products is an important challenge for clean energy research. Here we report modular optimization of covalent organic frameworks (COFs), in which the building units are cobalt porphyrin catalysts linked by organic struts through imine bonds, to prepare a catalytic material for aqueous electrochemical reduction of CO2 to CO. The catalysts exhibit high Faradaic efficiency (90%) and turnover numbers (up to 290,000, with initial turnover frequency of 9400 hour(-1)) at pH 7 with an overpotential of -0.55 volts, equivalent to a 26-fold improvement in activity compared with the molecular cobalt complex, with no degradation over 24 hours. X-ray absorption data reveal the influence of the COF environment on the electronic structure of the catalytic cobalt centers.

/pdf/covalent-organic-frameworks-comprising-cobalt-porphyrins-for-16e0bybrm3.pdf

Covalent organic frameworks comprising cobalt porphyrins for catalytic CO2 reduction in water

Time-resolved, UV-vis spectroscopic measurements of Li+ diffusion in mesoscopic TiO2 photoanodes were conducted in dye sensitized photoelectrosynthesis cells (DSPECs) under operating conditions. In these experiments the spectral response of TiO2 derivatized with [Ru(bpy)2(4,4′-((HO)2PO)2bpy)]2+ (RuP, where bpy is 2,2′-bipyridine, (4,4′-((HO)2PO)2bpy) is [2,2′-bipyridine]-4,4′-diphosphonic acid) arises from electric field (Stark) effects on the metal-to-ligand-charge transfer (MLCT) absorption spectrum of RuP, which is screened by cation intercalation. These results verify that Li+ diffusion is coupled to electron injection and to electron recombination/extraction at the TiO2 interface. Li+ doping levels depend on the competition between dynamics of its intercalation and electron recombination/transport. For a DSPEC operating in aqueous solution at pH 4.5, the observed rate constants for Li+ intercalation and release were 0.22 s−1 and 0.014 s−1, respectively. Both processes were considerably slower in the more viscous solvent propylene carbonate with Li+ release rate constants <2 × 10−4 s−1. Accumulation of Li+ under these conditions shifts conduction band/trap states to less negative potentials, increasing electron lifetime in TiO2.

Visualization of cation diffusion at the TiO2 interface in dye sensitized photoelectrosynthesis cells (DSPEC)

Significant rate enhancements are found for benzyl alcohol oxidation by the RuV═O3+ form of the water oxidation catalyst [Ru(Mebimpy)(bpy)(OH2)]2+ [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2′-bipyridine] compared to RuIV═O2+ and for the RuIV═O2+ form with added bases due to a new pathway, concerted hydride proton transfer (HPT).

Multiple Pathways for Benzyl Alcohol Oxidation by RuV═O3+ and RuIV═O2+

https://www.rsc.org/suppdata/cc/c4/c4cc04071f/c4cc04071f1.pdf

Chloride-assisted catalytic water oxidation

Water oxidation is critically important for the development of energy solutions based on the concept of artificial photosynthesis. In order to gain deeper insight into the mechanism of water oxidation, the catalytic cycle for the first designed water oxidation catalyst, cis,cis-[(bpy)₂(H₂O)RuIIIORuIII(OH₂)(bpy)₂]4+ (bpy is 2,2-bipyridine) known as the blue dimer (BD), is monitored in D₂O by combined application of stopped flow UV-Vis, electron paramagnetic resonance (EPR) and resonance Raman spectroscopy on freeze quenched samples. The results of these studies show that the rate of formation of BD[4,5] by Ce(IV) oxidation of BD[3,4] (numbers in square bracket denote oxidation states of the ruthenium (Ru) centers) in 0.1 M HNO₃, as well as further oxidation of BD[4,5] are slower in D₂O by 2.1-2.5. Ce(IV) oxidation of BD[4,5] and reaction with H₂O result in formation of an intermediate, BD[3,4]', which builds up in reaction mixtures on the minute time scale. Combined results under the conditions of these experiments at pH 1 indicate that oxidation of BD[3,4]' is a rate limiting step in water oxidation with the BD catalyst.

/pdf/mechanism-of-catalytic-water-oxidation-by-the-ruthenium-blue-2n1pxuuhcm.pdf

Javier J. Concepcion

Papers

Visualization of cation diffusion at the TiO2 interface in dye sensitized photoelectrosynthesis cells (DSPEC)

Multiple Pathways for Benzyl Alcohol Oxidation by RuV═O3+ and RuIV═O2+

Chloride-assisted catalytic water oxidation

Mechanism of Catalytic Water Oxidation by the Ruthenium Blue Dimer Catalyst: Comparative Study in D2O versus H2O

Vibrational and structural mapping of [Os(bpy)3]3+/2+ and [Os(phen)3]3+/2+