Electrospinning is a highly versatile method to process solutions or melts, mainly of polymers, into continuous fibers with diameters ranging from a few micrometers to a few nanometers. This technique is applicable to virtually every soluble or fusible polymer. The polymers can be chemically modified and can also be tailored with additives ranging from simple carbon-black particles to complex species such as enzymes, viruses, and bacteria. Electrospinning appears to be straightforward, but is a rather intricate process that depends on a multitude of molecular, process, and technical parameters. The method provides access to entirely new materials, which may have complex chemical structures. Electrospinning is not only a focus of intense academic investigation; the technique is already being applied in many technological areas.

Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers

Semiconductor photocatalysis has received much attention as a potential solution to the worldwide energy shortage and for counteracting environmental degradation. This article reviews state-of-the-art research activities in the field, focusing on the scientific and technological possibilities offered by photocatalytic materials. We begin with a survey of efforts to explore suitable materials and to optimize their energy band configurations for specific applications. We then examine the design and fabrication of advanced photocatalytic materials in the framework of nanotechnology. Many of the most recent advances in photocatalysis have been realized by selective control of the morphology of nanomaterials or by utilizing the collective properties of nano-assembly systems. Finally, we discuss the current theoretical understanding of key aspects of photocatalytic materials. This review also highlights crucial issues that should be addressed in future research activities.

Nano‐photocatalytic Materials: Possibilities and Challenges

Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Recent Advances in Bulk Heterojunction Polymer Solar Cells

The self-assembly of colloids is an alternative to top-down processing that enables the fabrication of nanostructures. We show that self-assembled clusters of metal-dielectric spheres are the basis for nanophotonic structures. By tailoring the number and position of spheres in close-packed clusters, plasmon modes exhibiting strong magnetic and Fano-like resonances emerge. The use of identical spheres simplifies cluster assembly and facilitates the fabrication of highly symmetric structures. Dielectric spacers are used to tailor the interparticle spacing in these clusters to be approximately 2 nanometers. These types of chemically synthesized nanoparticle clusters can be generalized to other two- and three-dimensional structures and can serve as building blocks for new metamaterials.

https://science.sciencemag.org/content/sci/328/5982/1135.full.pdf

Self-Assembled Plasmonic Nanoparticle Clusters

Slow photon, or light with reduced group velocity, is a unique phenomenon found in photonic crystals that theoreticians have long suggested to be invaluable for increasing the efficiency of light-driven processes. This thesis demonstrates experimentally the feasibility of using slow photons to optically amplify photochemistry of both organic and inorganic systems. The effect of photonic properties on organic photochemistry was investigated by tracing out the wavelength-dependent rate of photoisomerization of azobenzene anchored on silica opals. The application of slow photons to inorganic photochemical processes was realized by molding nanocrystalline titania into an inverse opal structure and investigating its photodegradation efficiency in relation to the photonic properties. Changes in the photodegradation efficiency were directly linked to modifications of the electronic band gap absorption as a result of the photonic properties. The highest enhancement of twofold was achieved when the energy of the slow photons overlaps with the electronic band gap absorption, such that the loss of light due to photonic stop-band reflection was significantly reduced. In addition, the strength of slowphoton amplification with respect to the macroscopic structural order was studied by

/pdf/amplified-photochemistry-with-slow-photons-29q8pcf6gx.pdf

Amplified photochemistry with slow photons

We introduce a new sensing modality based on the actuation of discrete gold nanoparticle dimers. Binding of the target DNA leads to a geometrical extension of the dimer, thereby yielding a spectral blue shift in the hybridized plasmon mode as detected by single nanostructure scattering spectroscopy. The magnitude and opposite direction of this shift enabled us to spectroscopically distinguish the target from nonspecific binding and to detect the target in complex media like serum.

Plasmonic nanoparticle dimers for optical sensing of DNA in complex media.

We show that the photodegradation efficiency of TiO2 has been amplified 4-fold via the cooperativity of slow photons in photonic crystal and the incorporation of Pt nanoclusters. Various loadings of Pt nanoparticles were photodeposited on the surface of TiO2 inverse opals and the photodegradation of adsorbed acid orange was investigated. While slow photons increased the effective path length of light, Pt nanoparticles extended the lifetimes of the UV-excited electrons and holes. With 2-4 wt % of Pt on the TiO2 inverse opal, we demonstrate a synergistic optical and chemical enhancement for the first time.

Synergy of slow photon and chemically amplified photochemistry in platinum nanocluster-loaded inverse titania opals.

In this communication we study the influence of strong 3D confinement on the self-assembly of diblock copolymers containing a polyferrocenylsilane metallopolymer segment. Both silica colloidal crystals and silica inverse colloidal crystals, having nanometer-scale interconnected pore networks, are used as molds to direct the self-assembly. Unusual morphologies, such as concentric shells and branched lamellae, result from the interaction of the polymer with the high surface area topologically periodic templates.

Block copolymers under periodic, strong three-dimensional confinement.

A driving force in the rapidly developing field of photonic crystals has been the photonic bandgap, a range of energies where the propagation of light is completely forbidden. The photonic bandgap allows the design of photonic lattices that localize, guide and bend light at sub-micron length scales, providing opportunities for the creation of miniature optical devices and integrated optical circuits to help drive the revolution in photonics. A less well known attribute of photonic crystals is their theoretical ability to slow light to a velocity of zero. This phenomenon can be achieved at the high and low energy edges of photonic stopgaps where the photonic bands are flat and light exists as a standing wave commensurate with the photonic lattice and travels at a group velocity of zero, referred to as “slow photons” herein. It has been shown theoretically that the probability of harvesting slow photons scales inversely with their group velocity. This means that a number of well known photon driven processes and devices in chemistry and physics can be enhanced by capturing this unique property of slow photons. In this paper we will look at slow photons mainly through the eye of chemistry and highlight some recent developments in this exciting and emerging field that demonstrate the potential of slow photons in materials chemistry and nanochemistry.

Jennifer I. L. Chen

Papers

Amplified photochemistry with slow photons

Plasmonic nanoparticle dimers for optical sensing of DNA in complex media.

Synergy of slow photon and chemically amplified photochemistry in platinum nanocluster-loaded inverse titania opals.

Block copolymers under periodic, strong three-dimensional confinement.

Slow photons in the fast lane in chemistry