This review is an updated and expanded version of a paper that was published in this journal in 1997. The time frame has been extended in both directions to include the 22 years from 1981 to 2002, and a new secondary subdivision related to the natural product source but applied to formally synthetic compounds has been introduced, using the concept of a “natural product mimic” or “NM” to join the original primary divisions. From the data presented, the utility of natural products as sources of novel structures, but not necessarily the final drug entity, is still alive and well. Thus, in the area of cancer, the percentage of small molecule, new chemical entities that are nonsynthetic has remained at 62% averaged over the whole time frame. In other areas, the influence of natural product structures is quite marked, particularly in the antihypertensive area, where of the 74 formally synthetic drugs, 48 can be traced to natural product structures/mimics. Similarly, with the 10 antimigraine drugs, seven are bas...

Natural Products as Sources of New Drugs over the Period 1981−2002

The cardiovascular and other actions of angiotensin II (Ang II) are mediated by AT(1) and AT(2) receptors, which are seven transmembrane glycoproteins with 30% sequence similarity. Most species express a single autosomal AT(1) gene, but two related AT(1A) and AT(1B) receptor genes are expressed in rodents. AT(1) receptors are predominantly coupled to G(q/11), and signal through phospholipases A, C, D, inositol phosphates, calcium channels, and a variety of serine/threonine and tyrosine kinases. Many AT(1)-induced growth responses are mediated by transactivation of growth factor receptors. The receptor binding sites for agonist and nonpeptide antagonist ligands have been defined. The latter compounds are as effective as angiotensin converting enzyme inhibitors in cardiovascular diseases but are better tolerated. The AT(2) receptor is expressed at high density during fetal development. It is much less abundant in adult tissues and is up-regulated in pathological conditions. Its signaling pathways include serine and tyrosine phosphatases, phospholipase A(2), nitric oxide, and cyclic guanosine monophosphate. The AT(2) receptor counteracts several of the growth responses initiated by the AT(1) and growth factor receptors. The AT(4) receptor specifically binds Ang IV (Ang 3-8), and is located in brain and kidney. Its signaling mechanisms are unknown, but it influences local blood flow and is associated with cognitive processes and sensory and motor functions. Although AT(1) receptors mediate most of the known actions of Ang II, the AT(2) receptor contributes to the regulation of blood pressure and renal function. The development of specific nonpeptide receptor antagonists has led to major advances in the physiology, pharmacology, and therapy of the renin-angiotensin system.

https://pharmrev.aspetjournals.org/content/pharmrev/52/3/415.full.pdf

International Union of Pharmacology. XXIII. The Angiotensin II Receptors

The concept of isosterism between relatively simple chemical entities was originally contemplated by James Moir in 1909, a notion further refined by H. G. Grimm’s hydride displacement law and captured more effectively in the ideas advanced by Irving Langmuir based on experimental observations. Langmuir coined the term “isostere” and, 18 years in advance of its actual isolation and characterization, predicted that the physical properties of the then unknown ketene would resemble those of diazomethane. The emergence of bioisosteres as structurally distinct compounds recognized similarly by biological systems has its origins in a series of studies published byHans Erlenmeyer in the 1930s, who extended earlier work conducted by Karl Landsteiner. Erlenmeyer showed that antibodies were unable to discriminate between phenyl and thienyl rings or O, NH, and CH2 in the context of artificial antigens derived by reacting diazonium ions with proteins, a process that derivatized the ortho position of tyrosine, as summarized in Figure 1 The term “bioisostere” was introduced by Harris Friedman in 1950 who defined it as compounds eliciting a similar biological effect while recognizing that compounds may be isosteric but not necessarily bioisosteric. This notion anticipates that the application of bioisosterism will depend on context, relying much less on physicochemical properties as the underlying principle for biochemical mimicry. Bioisosteres are typically less than exact structural mimetics and are often more alike in biological rather than physical properties. Thus, an effective bioisostere for one biochemical application may not translate to another setting, necessitating the careful selection and tailoring of an isostere for a specific circumstance. Consequently, the design of bioisosteres frequently introduces structural changes that can be beneficial or deleterious depending on the context, with size, shape, electronic distribution, polarizability, dipole, polarity, lipophilicity, and pKa potentially playing key contributing roles in molecular recognition and mimicry. In the contemporary practice of medicinal chemistry, the development and application of bioisosteres have been adopted as a fundamental tactical approach useful to address a number of aspects associated with the design and development of drug candidates. The established utility of bioisosteres is broad in nature, extending to improving potency, enhancing selectivity, altering physical properties, reducing or redirecting metabolism, eliminating or modifying toxicophores, and acquiring novel intellectual property. In this Perspective, some contemporary themes exploring the role of isosteres in drug design are sampled, with an emphasis placed on tactical applications designed to solve the kinds of problems that impinge on compound optimization and the long-term success of drug candidates. Interesting concepts that may have been poorly effective in the context examined are captured, since the ideas may have merit in alternative circumstances. A comprehensive cataloging of bioisosteres is beyond the scope of what will be provided, although a synopsis of relevant isosteres of a particular functionality is summarized in a succinct fashion in several sections. Isosterism has also found productive application in the design and optimization of organocatalysts, and there are several examples in which functional mimicry established initially in a medicinal chemistry setting has been adopted by this community.

Synopsis of some recent tactical application of bioisosteres in drug design.

Since the discovery of organic azides by Peter Griess more than 140 years ago, numerous syntheses of these energy-rich molecules have been developed. In more recent times in particular, completely new perspectives have been developed for their use in peptide chemistry, combinatorial chemistry, and heterocyclic synthesis. Organic azides have assumed an important position at the interface between chemistry, biology, medicine, and materials science. In this Review, the fundamental characteristics of azide chemistry and current developments are presented. The focus will be placed on cycloadditions (Huisgen reaction), aza ylide chemistry, and the synthesis of heterocycles. Further reactions such as the aza-Wittig reaction, the Sundberg rearrangement, the Staudinger ligation, the Boyer and Boyer-Aube rearrangements, the Curtius rearrangement, the Schmidt rearrangement, and the Hemetsberger rearrangement bear witness to the versatility of modern azide chemistry.

Organic Azides: An Exploding Diversity of a Unique Class of Compounds

A carbonic anhydrase IX (CA IX) inhibitor which comprises a compound of general formula: R-NH-CX-NH-(CH 2 ) n -Ar-Q-SO 2 -NH 2 or a pharmaceutically-acceptable salt, derivative or prodrug thereof; wherein n = 0, 1 or 2; Q is O or NH; X is O or S; and R comprises an organic substituent group.

Carbonic anhydrase inhibitors

Identification of angiotensin II receptor subtypes

Substituted imidazoles such as ##STR1## are useful as angiotensin II blockers. These compounds have activity in treating hypertension and congestive heart failure.

Angiotensin II receptor blocking imidazoles

5-[4'-Methyl-1,1'-biphenyl-2-yl]-1H-tetrazole (6), which contains a sterically hindered o-tetrazole group, was synthesized by three different routes, one of them employing a new tetrazole synthesis. Subsequent acid hydrolysis of the trityl protecting group of 5 yielded biphenylyltetrazole 6. The second synthesis involved the nitrosation of an N-(2-cyanoethyl)-protected biphenylamidrazone. The third method involves the novel transformation of an N-(2-cyanoethyl)-substituted amide into the corresponding N-(2-cyanoethyl)-protected tetrazole in one step using triphenylphosphine, diethyl azodicarboxylate (DEAD), and azidotrimethylsilane. Subsequent base hydrolysis of the cyanoethyl group yielded 6 as before. Examples are also provided of the application of this new reaction to other N-(2-cyanoethyl)-protected carboxamides

Three synthetic routes to a sterically hindered tetrazole. A new one-step mild conversion of an amide into a tetrazole

A new class of potent antihypertensives has been discovered that exert their effect through blockade of the angiotensin II (AII) receptor. Most AII antagonists reported so far are peptide mimics of the endogenous vasoconstrictor octapeptide angiotensin II. The compounds of this paper are nonpeptides and therefore constitute a new class of potent AII receptor antagonists. Based on the overlap of a conformation of AII with literature lead 3, a hypothesis was developed suggesting the need for an additional acidic functionality to increase the lead's potency. The substitution of an additional carboxylic acid resulted in a 10-fold increase in binding affinity observed for diacid 4. The binding affinities for subsequent compounds were eventually increased 1000-fold over that of the literature leads through a systematic SAR study. Thus the AII receptor binding affinity [IC50 (microM)] of 15 microM for literature lead 1, for example, was increased to 0.018 and 0.012 microM for compounds 33 and 53. A structure-affinity relationship has been found requiring the presence of four key elements for good activity: (1) an additional phenyl ring at the N-benzyl para position of the benzylimidazole nucleus, (2) an acidic functionality at the ortho position of the terminal aromatic ring, (3) a lipophilic side chain at the imidazole 2-position of three to five carbon atoms in length, and (4) a group at the imidazole 5-position capable of hydrogen bonding. The synthesis as well as the pharmacological activity of the compounds in this new series of AII receptor antagonists are presented.

The discovery of potent nonpeptide angiotensin II receptor antagonists: a new class of potent antihypertensives.

Substituted imidazole angiotensin II blockers such as formula (I) can be administered in combination with diuretics for treatment of hypertension or in combination with a non-steroidal anti-inflammatory drug (NSAID) to prevent renal failure which can result from administration of an NSAID. Novel substituted imidazole angiotensin II blockers, processes for their manufacture and their use to treat hypertension and congestive heart failure are disclosed.

John V. Duncia

Papers

Identification of angiotensin II receptor subtypes

Angiotensin II receptor blocking imidazoles

Three synthetic routes to a sterically hindered tetrazole. A new one-step mild conversion of an amide into a tetrazole

The discovery of potent nonpeptide angiotensin II receptor antagonists: a new class of potent antihypertensives.

Angiotensin ii receptor blocking imidazoles and combinations thereof with diuretics and nsaids