Electrochemical capacitors, also called supercapacitors, store energy using either ion adsorption (electrochemical double layer capacitors) or fast surface redox reactions (pseudo-capacitors). They can complement or replace batteries in electrical energy storage and harvesting applications, when high power delivery or uptake is needed. A notable improvement in performance has been achieved through recent advances in understanding charge storage mechanisms and the development of advanced nanostructured materials. The discovery that ion desolvation occurs in pores smaller than the solvated ions has led to higher capacitance for electrochemical double layer capacitors using carbon electrodes with subnanometre pores, and opened the door to designing high-energy density devices using a variety of electrolytes. Combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries. The use of carbon nanotubes has further advanced micro-electrochemical capacitors, enabling flexible and adaptable devices to be made. Mathematical modelling and simulation will be the key to success in designing tomorrow's high-energy and high-power devices.

https://hal.archives-ouvertes.fr/hal-02417326/document

Materials for electrochemical capacitors

4.3. Reaction Mechanism 2373 4.4. Asymmetric Synthesis 2374 4.5. Outlook 2374 5. Alternating Polymerization of Oxiranes and CO2 2374 5.1. Reaction Outlines 2374 5.2. Catalyst 2376 5.3. Asymmetric Polymerization 2377 5.4. Immobilized Catalysts 2377 6. Synthesis of Urea and Urethane Derivatives 2378 7. Synthesis of Carboxylic Acid 2379 8. Synthesis of Esters and Lactones 2380 9. Synthesis of Isocyanates 2382 10. Hydrogenation and Hydroformylation, and Alcohol Homologation 2382

Transformation of carbon dioxide.

Background Since at least 400 C.E., when the Mayans first used layered clays to make dyes, people have been harnessing the properties of layered materials. This gradually developed into scientific research, leading to the elucidation of the laminar structure of layered materials, detailed understanding of their properties, and eventually experiments to exfoliate or delaminate them into individual, atomically thin nanosheets. This culminated in the discovery of graphene, resulting in a new explosion of interest in two-dimensional materials. Layered materials consist of two-dimensional platelets weakly stacked to form three-dimensional structures. The archetypal example is graphite, which consists of stacked graphene monolayers. However, there are many others: from MoS 2 and layered clays to more exotic examples such as MoO 3 , GaTe, and Bi 2 Se 3 . These materials display a wide range of electronic, optical, mechanical, and electrochemical properties. Over the past decade, a number of methods have been developed to exfoliate layered materials in order to produce monolayer nanosheets. Such exfoliation creates extremely high-aspect-ratio nanosheets with enormous surface area, which are ideal for applications that require surface activity. More importantly, however, the two-dimensional confinement of electrons upon exfoliation leads to unprecedented optical and electrical properties. Liquid exfoliation of layered crystals allows the production of suspensions of two-dimensional nanosheets, which can be formed into a range of structures. (A) MoS 2 powder. (B) WS 2 dispersed in surfactant solution. (C) An exfoliated MoS 2 nanosheet. (D) A hybrid material consisting of WS 2 nanosheets embedded in a network of carbon nanotubes. Advances An important advance has been the discovery that layered crystals can be exfoliated in liquids. There are a number of methods to do this that involve oxidation, ion intercalation/exchange, or surface passivation by solvents. However, all result in liquid dispersions containing large quantities of nanosheets. This brings considerable advantages: Liquid exfoliation allows the formation of thin films and composites, is potentially scaleable, and may facilitate processing by using standard technologies such as reel-to-reel manufacturing. Although much work has focused on liquid exfoliation of graphene, such processes have also been demonstrated for a host of other materials, including MoS 2 and related structures, layered oxides, and clays. The resultant liquid dispersions have been formed into films, hybrids, and composites for a range of applications. Outlook There is little doubt that the main advances are in the future. Multifunctional composites based on metal and polymer matrices will be developed that will result in enhanced mechanical, electrical, and barrier properties. Applications in energy generation and storage will abound, with layered materials appearing as electrodes or active elements in devices such as displays, solar cells, and batteries. Particularly important will be the use of MoS 2 for water splitting and metal oxides as hydrogen evolution catalysts. In addition, two-dimensional materials will find important roles in printed electronics as dielectrics, optoelectronic devices, and transistors. To achieve this, much needs to be done. Production rates need to be increased dramatically, the degree of exfoliation improved, and methods to control nanosheet properties developed. The range of layered materials that can be exfoliated must be expanded, even as methods for chemical modification must be developed. Success in these areas will lead to a family of materials that will dominate nanomaterials science in the 21st century.

/pdf/liquid-exfoliation-of-layered-materials-3l83x6zg7f.pdf

Liquid Exfoliation of Layered Materials

Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored in order to address this hurdle. This review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocellulose.

Microfibrillated cellulose and new nanocomposite materials: a review

Hyperbranched polymers: from synthesis to applications

Layered double hydroxide (LDH) has positive charge between the layers and is known as anion exchangeable clay being able to intercalate various organic and inorganica nions. In this study, organic-inorganic layered nanohybrids were prepared by intercalation of organic carboxylate anions into Zn/Al LDH in an aqueous solution. Four intercalation compounds were prepared by the reactions of succinate, terephthalate, 4-pyridinecarboxylate, and p-hydroxybenzoate anions with Zn/Al LDH in aqueous solution. Interlayer spacing of these four intercalation compounds decreased by the thermal treatment at 363 K, and recovered by the treatment in water, reversibly.

Reversible Change of Interlayer Spacing of Layered Double Hydroxides Containing Organic Carboxylates

New pH sensitive organic-inorganic intercalation compounds having different interlayer spacing were prepared. Zn-Al layered double hydroxide (LDH) is an anion exchangeable inorganic layered compound whose interlayer spacing is 0.76 nm. In the reactions of indigocarmine (IDC) with the calcined Zn-Al LDH at pH = 7 (LDH-IDC7), interlayer spacing increased to 2.25 nm. The interlayer spacing of LDH-IDC7 decreased to 1.89 nm by the treatment in basic solution. In the reaction of IDC with the calcined Zn-Al LDH at pH = 10 (LDH-IDC10), interlayer spacing of the intercalation compounds was 1.89 nm. The interlayer spacing of these intercalation compounds was changed reversibly by the treatments in acidic or basic solution.

pH sensitive organic-inorganic layered nanomaterials by self-assembly of indigocarmine between the inorganic layers.

Preparation of partially acetylated chitin nanofiber/polyethylene composite film

This paper reports an investigation of enzymatic phosphorolysis of α(1→4)- linked oligo-d-glucosaminide substrates by thermo stable α-glucan phosphorylase (from Aquifex aeolicus VF5) catalysis. α-Glucan phosphorylase catalyzes both phosphorolysis and glucosylation/polymerization at the nonreducing end of α(1→4)-linked glucose substrates depending on conditions. The authors also found that α(1→4)-linked d-glucosaminide polymer (chitosan stereoisomer) was obtained by the thermostable α-glucan phosphorylase-catalyzed enzymatic polymerization of α-d-glucosamine 1-phosphate from a maltooligosaccharide primer. In the present study, we intend to reveal whether the enzyme catalyzes phosphorolysis of substrates containing such d-glucosaminide chains. The α(1→4)-linked oligo-d-glucosaminide substrates elongated from maltotriose were first prepared by the thermostable α-glucan phosphorylase-catalyzed enzymatic polymerization of α-d-glucosamine 1-phosphate from the maltotriose primer and subsequent purification by preparative HPLC. The phosphorolysis of the resulting substrates are conducted in the presence of thermostable α-glucan phosphorylase in phosphate buffer. The analytical results of the products fully supported the occurrence of phosphorolysis at the nonreducing end of both the chains of d-glucosamine-α(1→4)-d-glucosamine and d-glucosamine-α(1→4)-d-glucose sequences.

/pdf/an-investigation-of-enzymatic-phosphorolysisof-aza-1a-a-a-4-38d2xdkzjj.pdf

An Investigation of Enzymatic Phosphorolysisof ÃŽÂ±(1Ã¢Â†Â’4)-Linked Oligo-d-glucosaminidesby Thermostable ÃŽÂ±-Glucan PhosphorylaseCatalysis

In this study, we attempted to prepare an amylose-oligo[(R)-3-hydroxybutyrate] (ORHB) inclusion complex using a vine-twining polymerization approach. Our previous studies indicated that glucan phosphorylase (GP)-catalyzed enzymatic polymerization in the presence of appropriate hydrophobic guest polymers produces the corresponding amylose–polymer inclusion complexes, a process named vine-twining polymerization. When vine-twining polymerization was conducted in the presence of ORHB under general enzymatic polymerization conditions (45 °C), the enzymatically produced amylose did not undergo complexation with ORHB. However, using a maltotriose primer in the same polymerization system at 70 °C for 48 h to obtain water-soluble amylose, called single amylose, followed by cooling the system over 7 h to 45 °C, successfully induced the formation of the inclusion complex. Furthermore, enzymatic polymerization initiated from a longer primer under the same conditions induced the partial formation of the inclusion complex. The structures of the different products were analyzed by X-ray diffraction, 1H-NMR, and IR measurements. The mechanism of formation of the inclusion complexes discussed in the study is proposed based on the additional experimental results.

https://www.mdpi.com/1420-3049/26/9/2595/pdf

Jun-ichi Kadokawa

Papers

Reversible Change of Interlayer Spacing of Layered Double Hydroxides Containing Organic Carboxylates

pH sensitive organic-inorganic layered nanomaterials by self-assembly of indigocarmine between the inorganic layers.

Preparation of partially acetylated chitin nanofiber/polyethylene composite film

An Investigation of Enzymatic Phosphorolysisof ÃŽÂ±(1Ã¢Â†Â’4)-Linked Oligo-d-glucosaminidesby Thermostable ÃŽÂ±-Glucan PhosphorylaseCatalysis

Preparation of Amylose-Oligo[(R)-3-hydroxybutyrate] Inclusion Complex by Vine-Twining Polymerization.