Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics

The recent developments and trends in combustion science towards the synthesis of nanomaterials are discussed. Different modifications made to conventional combustion approaches for preparation of nanomaterials are critically analyzed. Special attention is paid to various applications of combustion synthesized nanosized products.

/pdf/combustion-synthesis-and-nanomaterials-5cotkw7r6f.pdf

Combustion synthesis and nanomaterials

Long-term device stability is the most pressing issue that impedes perovskite solar cell commercialization, given the achieved 22.7% efficiency. The perovskite absorber material itself has been heavily scrutinized for being prone to degradation by water, oxygen and ultraviolet light. To date, most reports characterize device stability in the absence of these extrinsic factors. Here we show that, even under the combined stresses of light (including ultraviolet light), oxygen and moisture, perovskite solar cells can retain 94% of peak efficiency despite 1,000 hours of continuous unencapsulated operation in ambient air conditions (relative humidity of 10–20%). Each interface and contact layer throughout the device stack plays an important role in the overall stability which, when appropriately modified, yields devices in which both the initial rapid decay (often termed burn-in) and the gradual slower decay are suppressed. This extensively modified device architecture and the understanding developed will lead towards durable long-term device performance.

Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability

This review focuses on the synthesis, protection, functionalization, characterization and with some applications of magnetic nanoparticles (MNPs) The review begins with an overview on magnetic property and single domain particles The synthetic strategies developed for the generation of MNPs, with a focus on particle formation mechanism and recent modifications made on the synthesis of monodisperse samples of relatively large quantities are also discussed Then, different methodologies for the protection and functionalization of the synthesized MNPs, together with the characterization techniques are explained Finally, some of the recent industrial, biological, environmental and analyticals application of MNPs are briefly reviewed, and some future trends and perspectives in these research areas will be outlined

Magnetic nanoparticles: Synthesis, stabilization, functionalization, characterization, and applications

Localized magnetic hyperthermia using magnetic nanoparticles (MNPs) under the application of small magnetic fields is a promising tool for treating small or deep-seated tumors. For this method to be applicable, the amount of MNPs used should be minimized. Hence, it is essential to enhance the power dissipation or heating efficiency of MNPs. Several factors influence the heating efficiency of MNPs, such as the amplitude and frequency of the applied magnetic field and the structural and magnetic properties of MNPs. We discuss some of the physics principles for effective heating of MNPs focusing on the role of surface anisotropy, interface exchange anisotropy and dipolar interactions. Basic magnetic properties of MNPs such as their superparamagnetic behavior, are briefly reviewed. The influence of temperature on anisotropy and magnetization of MNPs is discussed. Recent development in self-regulated hyperthermia is briefly discussed. Some physical and practical limitations of using MNPs in magnetic hyperthermia are also briefly discussed.

https://www.mdpi.com/2079-4991/5/1/63/pdf

Magnetic Properties of Magnetic Nanoparticles for Efficient Hyperthermia.

Metastable Intermolecular Composites or so-called Nanoenergetic Materials have been widely touted for their potential to fulfill dreams in high density energetic materials and nanotechnology. They are likely to become the next-generation explosives, propellants and primes as they enable flexibility in energy density and power release through control of particle size, tunable stoichiometry and choice of fuel and oxidizer. Despite intense examination by scientists and engineers worldwide the temperature progress and velocity of the thermal front propagation on the nanostructured formulations, however, gas pressure evolution and rate of gas release are not well investigated and understood. This issue has seriously impeded realization of various potential emerging applications envisioned in rocket solid fuels and explosives, which require a high pressure discharge in a short period of time as well as in bio-defeat systems. This highlight describes principles and development of Nanoenergetic Gas-Generators (NGG) systems comprising high PV (pressure × volume) values and energy densities (up to 25.7 kJ cm−3) that may have several potential civil and military applications. Our recent study revealed that Al/Bi2O3 and Al/I2O5 nanocomposites can generate a transient pressure pulse more than three times larger than that during the explosion of traditional thermite reactive mixtures.

/pdf/nanoenergetic-gas-generators-principles-and-applications-dfh3dypwfb.pdf

Nanoenergetic Gas-Generators: principles and applications

Our experiments showed that the combustion of an Al-Bi2O3 nanoparticle mixture generated the highest pressure pulse among common nanothermite reactions and can potentially be used as a nanoenergetic gas generator. The combustion front propagation velocity and rate of energy release increased by up to three orders of magnitude when the particle size was reduced to a nanosize range for both the aluminum and the oxidizer. We developed a novel one-step (metal nitrate-glycine) combustion synthesis of nanostructured amorphous-like and highly crystalline bismuth trioxide nanoparticles. The combustion synthesis was conducted using a solution of molten bismuth nitrate as an oxidizer and glycine as a fuel. The glycine was completely combusted during the thermal decomposition of the bismuth nitrate pentahydrate and generated a temperature front that propagated through the sample. Increasing the fuel concentration increased the maximum combustion temperature from 280 to 1200 degrees C and the Bi2O3 particle size from 20 to 100 nm. The oxidizer/fuel ratio had a strong impact on the bismuth trioxide particle crystallinity. At low temperature (280 degrees C), amorphous-like bismuth trioxide nanoparticles formed, while at T > or =370 degrees C the structures were crystalline. A peak pressure of approximately 12 MPa and a thermal front propagating velocity of approximately 2500 m s(-1) were achieved during the combustion of an Al-Bi2O3 mixture containing 80 wt% of the synthesized Bi2O3 crystalline nanoparticles (size: 40-50 nm).

https://iopscience.iop.org/article/10.1088/0957-4484/20/40/405609/pdf

Synthesis and performance of bismuth trioxide nanoparticles for high energy gas generator use

Carbon combustion synthesis is applied to rapid and energy efficient fabrication of crystalline barium hexaferrite nanoparticles with the average particle size of 50–100 nm. In this method, the exothermic oxidation of carbon nanoparticles with an average size of 5 nm with a surface area of 80 m 2 /g generates a self-propagating thermal wave with maximum temperatures of up to 1000 °C. The thermal front rapidly propagates through the mixture of solid reactants converting it to the hexagonal barium ferrite. Carbon is not incorporated in the product and is emitted from the reaction zone as a gaseous CO 2 . The activation energy for carbon combustion synthesis of BaFe 12 O 19 was estimated to be 98 kJ/mol. A complete conversion to hexagonal barium ferrite is obtained for carbon concentration exceeding 11 wt.%. The magnetic properties H c ∼3000 Oe and M s ∼50.3 emu/g of the compact sintered ferrites compare well with those produced by other synthesis methods.

Barium hexaferrite nanoparticles: Synthesis and magnetic properties

Novel nanoenergetic system based on iodine pentoxide

We studied the impact of aluminum particle size and the thickness of surrounding alumina layer on the dynamic pressure discharge of nanothermite reactions in the Bi2O3/Al system. A pressure discharge from 9 to 13 MPa was generated using as-synthesized Bi2O3 nano-particles produced by combustion synthesis and Al nanoparticles with size from 3 μm to 100 nm. The maximum reaction temperature was measured to be ∼2700 °C. The estimated activation energy of the reaction was 45 kJ/mol. A very large (several orders of magnitude) difference existed between the rate of the pressure pulse release by nanothermite reactions and by thermite reactions with large aluminum particles. The maximum observed pressurization rate was 3200 GPa/s. The time needed to reach the peak pressure was 0.01 ms and 100 ms for aluminum particles with diameter of 100 nm and 70 microns, respectively. The discharge pressure was a monotonic decreasing function of the thickness of the surrounding alumina layer.

/pdf/the-behavior-of-nanothermite-reaction-based-on-bi2o3-al-115u76kbad.pdf

Karen S. Martirosyan

Papers

Nanoenergetic Gas-Generators: principles and applications

Synthesis and performance of bismuth trioxide nanoparticles for high energy gas generator use

Barium hexaferrite nanoparticles: Synthesis and magnetic properties

Novel nanoenergetic system based on iodine pentoxide

The behavior of nanothermite reaction based on Bi2O3/Al