Summary for policymakers Technical summary 1. The climate system - an overview 2. Observed climate variability and change 3. The carbon cycle and atmospheric CO2 4. Atmospheric chemistry and greenhouse gases 5. Aerosols, their direct and indirect effects 6. Radiative forcing of climate change 7. Physical climate processes and feedbacks 8. Model evaluation 9. Projections of future climate change 10. Regional climate simulation - evaluation and projections 11. Changes in sea level 12. Detection of climate change and attribution of causes 13. Climate scenario development 14. Advancing our understanding Glossary Index Appendix.

Climate change 2001: the scientific basis

Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment provides an evaluation of black-carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative in providing best estimates and uncertainties of the main forcing terms: direct solar absorption; influence on liquid, mixed phase, and ice clouds; and deposition on snow and ice. These effects are calculated with climate models, but when possible, they are evaluated with both microphysical measurements and field observations. Predominant sources are combustion related, namely, fossil fuels for transportation, solid fuels for industrial and residential uses, and open burning of biomass. Total global emissions of black carbon using bottom-up inventory methods are 7500 Gg yr−1 in the year 2000 with an uncertainty range of 2000 to 29000. However, global atmospheric absorption attributable to black carbon is too low in many models and should be increased by a factor of almost 3. After this scaling, the best estimate for the industrial-era (1750 to 2005) direct radiative forcing of atmospheric black carbon is +0.71 W m−2 with 90% uncertainty bounds of (+0.08, +1.27) W m−2. Total direct forcing by all black carbon sources, without subtracting the preindustrial background, is estimated as +0.88 (+0.17, +1.48) W m−2. Direct radiative forcing alone does not capture important rapid adjustment mechanisms. A framework is described and used for quantifying climate forcings, including rapid adjustments. The best estimate of industrial-era climate forcing of black carbon through all forcing mechanisms, including clouds and cryosphere forcing, is +1.1 W m−2 with 90% uncertainty bounds of +0.17 to +2.1 W m−2. Thus, there is a very high probability that black carbon emissions, independent of co-emitted species, have a positive forcing and warm the climate. We estimate that black carbon, with a total climate forcing of +1.1 W m−2, is the second most important human emission in terms of its climate forcing in the present-day atmosphere; only carbon dioxide is estimated to have a greater forcing. Sources that emit black carbon also emit other short-lived species that may either cool or warm climate. Climate forcings from co-emitted species are estimated and used in the framework described herein. When the principal effects of short-lived co-emissions, including cooling agents such as sulfur dioxide, are included in net forcing, energy-related sources (fossil fuel and biofuel) have an industrial-era climate forcing of +0.22 (−0.50 to +1.08) W m−2 during the first year after emission. For a few of these sources, such as diesel engines and possibly residential biofuels, warming is strong enough that eliminating all short-lived emissions from these sources would reduce net climate forcing (i.e., produce cooling). When open burning emissions, which emit high levels of organic matter, are included in the total, the best estimate of net industrial-era climate forcing by all short-lived species from black-carbon-rich sources becomes slightly negative (−0.06 W m−2 with 90% uncertainty bounds of −1.45 to +1.29 W m−2). The uncertainties in net climate forcing from black-carbon-rich sources are substantial, largely due to lack of knowledge about cloud interactions with both black carbon and co-emitted organic carbon. In prioritizing potential black-carbon mitigation actions, non-science factors, such as technical feasibility, costs, policy design, and implementation feasibility play important roles. The major sources of black carbon are presently in different stages with regard to the feasibility for near-term mitigation. This assessment, by evaluating the large number and complexity of the associated physical and radiative processes in black-carbon climate forcing, sets a baseline from which to improve future climate forcing estimates.

/pdf/bounding-the-role-of-black-carbon-in-the-climate-system-a-1fc3novd9r.pdf

Bounding the role of black carbon in the climate system: A scientific assessment

[1] We use the Total Ozone Mapping Spectrometer (TOMS) sensor on the Nimbus 7 satellite to map the global distribution of major atmospheric dust sources with the goal of identifying common environmental characteristics The largest and most persistent sources are located in the Northern Hemisphere, mainly in a broad “dust belt” that extends from the west coast of North Africa, over the Middle East, Central and South Asia, to China There is remarkably little large-scale dust activity outside this region In particular, the Southern Hemisphere is devoid of major dust activity Dust sources, regardless of size or strength, can usually be associated with topographical lows located in arid regions with annual rainfall under 200–250 mm Although the source regions themselves are arid or hyperarid, the action of water is evident from the presence of ephemeral streams, rivers, lakes, and playas Most major sources have been intermittently flooded through the Quaternary as evidenced by deep alluvial deposits Many sources are associated with areas where human impacts are well documented, eg, the Caspian and Aral Seas, Tigris-Euphrates River Basin, southwestern North America, and the loess lands in China Nonetheless, the largest and most active sources are located in truly remote areas where there is little or no human activity Thus, on a global scale, dust mobilization appears to be dominated by natural sources Dust activity is extremely sensitive to many environmental parameters The identification of major sources will enable us to focus on critical regions and to characterize emission rates in response to environmental conditions With such knowledge we will be better able to improve global dust models and to assess the effects of climate change on emissions in the future It will also facilitate the interpretation of the paleoclimate record based on dust contained in ocean sediments and ice cores

https://agupubs.onlinelibrary.wiley.com/doi/epdf/10.1029/2000RG000095

Environmental characterization of global sources of atmospheric soil dust identified with the nimbus 7 total ozone mapping spectrometer (toms) absorbing aerosol product

This review is written with the goal of informing public health concerns related to nanoscience, while raising awareness of nanomaterials toxicity among scientists and manufacturers handling them. We show that humans have always been exposed to nanoparticles and dust from natural sources and human activities, the recent development of industry and combustion-based engine transportation profoundly increasing anthropogenic nanoparticulate pollution. The key to understanding the toxicity of nanoparticles is that their minute size, smaller than cells and cellular organelles, allows them to penetrate these basic biological structures, disrupting their normal function. Among diseases associated with nanoparticles are asthma, bronchitis, lung cancer, neurodegenerative diseases (such as Parkinson`s and Alzheimer`s diseases), Crohn`s disease, colon cancer. Nanoparticles that enter the circulatory system are related to occurrence of arteriosclerosis, and blood clots, arrhythmia, heart diseases, and ultimately cardiac death. We show that possible adverse effects of nanoparticles on human health depend on individual factors such as genetics and existing disease, as well as exposure, and nanoparticle chemistry, size, shape, and agglomeration state. The faster we will understand their causes and mechanisms, the more likely we are to find cures for diseases associated with nanoparticle exposure. We foresee a future with better-informed, and hopefully more cautious manipulation of engineered nanomaterials, as well as the development of laws and policies for safely managing all aspects of nanomaterial manufacturing, industrial and commercial use, and recycling.

Nanomaterials and nanoparticles: Sources and toxicity

This review is presented as a common foundation for scientists interested in nanoparticles, their origin, activity, and biological toxicity. It is written with the goal of rationalizing and informing public health concerns related to this sometimes-strange new science of “nano,” while raising awareness of nanomaterials’ toxicity among scientists and manufacturers handling them. We show that humans have always been exposed to tiny particles via dust storms, volcanic ash, and other natural processes, and that our bodily systems are well adapted to protect us from these potentially harmful intruders. The reticuloendothelial system, in particular, actively neutralizes and eliminates foreign matter in the body, including viruses and nonbiological particles. Particles originating from human activities have existed for millennia, e.g., smoke from combustion and lint from garments, but the recent development of industry and combustion-based engine transportation has profoundly increased anthropogenic particulate pollution. Significantly, technological advancement has also changed the character of particulate pollution, increasing the proportion of nanometer-sized particles-“nanoparticles”-and expanding the variety of chemical compositions. Recent epidemiological studies have shown a strong correlation between particulate air pollution levels, respiratory and cardiovascular diseases, various cancers, and mortality. Adverse effects of nanoparticles on human health depend on individual factors such as genetics and existing disease, as well as exposure, and nanoparticle chemistry, size, shape, agglomeration state, and electromagnetic properties. Animal and human studies show that inhaled nanoparticles are less efficiently removed than larger particles by the macrophage clearance mechanisms in the lungs, causing lung damage, and that nanoparticles can translocate through the circulatory, lymphatic, and nervous systems to many tissues and organs, including the brain. The key to understanding the toxicity of nanoparticles is that their minute size, smaller than cells and cellular organelles, allows them to penetrate these basic biological structures, disrupting their normal function. Examples of toxic effects include tissue inflammation, and altered cellular redox balance toward oxidation, causing abnormal function or cell death. The manipulation of matter at the scale of atoms, “nanotechnology,” is creating many new materials with characteristics not always easily predicted from current knowledge. Within the nearly limitless diversity of these materials, some happen to be toxic to biological systems, others are relatively benign, while others confer health benefits. Some of these materials have desirable characteristics for industrial applications, as nanostructured materials often exhibit beneficial properties, from UV absorbance in sunscreen to oil-less lubrication of motors. A rational science-based approach is needed to minimize harm caused by these materials, while supporting continued study and appropriate industrial development. As current knowledge of the toxicology of “bulk” materials may not suffice in reliably predicting toxic forms of nanoparticles, ongoing and expanded study of “nanotoxicity” will be necessary. For nanotechnologies with clearly associated health risks, intelligent design of materials and devices is needed to derive the benefits of these new technologies while limiting adverse health impacts. Human exposure to toxic nanoparticles can be reduced through identifying creation-exposure pathways of toxins, a study that may someday soon unravel the mysteries of diseases such as Parkinson’s and Alzheimer’s. Reduction in fossil fuel combustion would have a large impact on global human exposure to nanoparticles, as would limiting deforestation and desertification. While nanotoxicity is a relatively new concept to science, this review reveals the result of life’s long history of evolution in the presence of nanoparticles, and how the human body, in particular, has adapted to defend itself against nanoparticulate intruders.

https://avs.scitation.org/doi/pdf/10.1116/1.2815690

The Cirrus Parcel Model Comparison (CPMC) is a project of the GEWEX Cloud System Study Working Group on Cirrus Cloud Systems (GCSS WG2). The primary goal of this project is to identify cirrus model sensitivities to the state of our knowledge of nucleation and microphysics. Furthermore, the common ground of the findings may provide guidelines for models with simpler cirrus microphysics modules.

Cirrus Parcel Model Comparison Project. Phase 1

Measurements of the angular scattering and extinction of IR (10.6-μm) laser radiation in laboratory water and ice clouds are reported and compared to theoretical predictions for spheres and visible (0.633-μm) light scattering data. Randomly oriented cloud particles with dimensions ranging from several times smaller to larger than the incident wavelength generated phase functions span the Rayleigh and Mie scattering domains and illustrate the effects caused by strong internal energy absorption. Dual-wavelength extinction measurements reveal information on the growth and dissipation of laboratory water clouds and the effects of cloud seeding. The remote sensing significance of the findings is discussed.

Infrared (10.6-μm) scattering and extinction in laboratory water and ice clouds

Ground-based polarization lidar measurements have been obtained in conjunction with a commercial cloud seeding program to evaluate the potential of pulsed laser remote sensing techniques for increasing the effectiveness of orographic cloud seeding operations. The lidar measurements, supplemented by microwave radar cloud top and rawinsonde data, are shown to aid in the determination of seeding criteria. Our real-time seed, no-seed decisions based on lidar polarization measurements of cloud ice-water balance compare favorably with the declarations issued locally by the project meteorologists. Moreover, the lidar has detected changes in cloud layer structure and ice-water balance brought about by aerial seeding operations which are quite distinct from the background conditions, indicating that lidar observations may also find application as part of a physical evaluation method of seeding effects. It is concluded that despite the range limitations of lidar, the application of the remote sensing techn...

An Initial Application of Polarization Lidar for Orographic Cloud Seeding Operations

A variety of types of aerosol particles, both natural and human-made, are commonly suspended in the atmosphere. Different aerosol types have characteristic shapes, but basically fall into two categories: spherical and irregular. Haze and forest fi re smoke particles are examples of the former, and desert dust and biogenic debris (e.g., pollen) of the latter. It is shown here that the capability of polarization lidar systems to sense the exact shape of particles makes it a powerful tool to remotely identify many types of aerosols. This is particularly important in the study of how aerosols may affect the properties of clouds.

Identifying Atmospheric Aerosols with Polarization Lidar

Apparent depletion of ozone in a cold (∼0°C), continental stratus cloud system was observed during in situ data collection on 30 April 1994 at the Department of Energy Clouds and Radiation Test Bed site in northern Oklahoma. Analyses of the aircraft data show a significant negative correlation between ozone concentration and liquid water content (LWC) in this cloud. Although droplets of pure water should not significantly affect ozone concentrations, water clouds can potentially perturb ozone through a number of processes, including radiative effects and aqueous-phase reactions in impure cloud droplets. A simple diagnostic model that takes account of cloud effects on the vertical ozone distribution in the boundary layer was constructed to interpret the field data. The results of multifactor regression analysis indicate that aqueous-phase chemistry contributes predominantly to the negative correlation. A depletion of ozone as a function of LWC of about −6.1 ppbv (g m−3)−1 was found in this particu...

/pdf/ozone-destruction-in-continental-stratus-clouds-an-aircraft-uep1g3ggkb.pdf

Kenneth Sassen

Papers

Cirrus Parcel Model Comparison Project. Phase 1

Infrared (10.6-μm) scattering and extinction in laboratory water and ice clouds

An Initial Application of Polarization Lidar for Orographic Cloud Seeding Operations

Identifying Atmospheric Aerosols with Polarization Lidar

Ozone Destruction in Continental Stratus Clouds: An Aircraft Case Study