This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent Many oxides consisting of metal cations with d0 and d10 configurations, metal (oxy)sulfide and metal (oxy)nitride photocatalysts have been reported, especially during the latest decade The fruitful photocatalyst library gives important information on factors affecting photocatalytic performances and design of new materials Photocatalytic water splitting and H2 evolution using abundant compounds as electron donors are expected to contribute to construction of a clean and simple system for solar hydrogen production, and a solution of global energy and environmental issues in the future (361 references)

Heterogeneous photocatalyst materials for water splitting

2.3. Evaluation of Photocatalytic Water Splitting 6507 2.3.1. Photocatalytic Activity 6507 2.3.2. Photocatalytic Stability 6507 3. UV-Active Photocatalysts for Water Splitting 6507 3.1. d0 Metal Oxide Photocatalyts 6507 3.1.1. Ti-, Zr-Based Oxides 6507 3.1.2. Nb-, Ta-Based Oxides 6514 3.1.3. W-, Mo-Based Oxides 6517 3.1.4. Other d0 Metal Oxides 6518 3.2. d10 Metal Oxide Photocatalyts 6518 3.3. f0 Metal Oxide Photocatalysts 6518 3.4. Nonoxide Photocatalysts 6518 4. Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting 6519

Semiconductor-based Photocatalytic Hydrogen Generation

Jenny Schneider,*,† Masaya Matsuoka,‡ Masato Takeuchi,‡ Jinlong Zhang, Yu Horiuchi,‡ Masakazu Anpo,‡ and Detlef W. Bahnemann*,† †Institut fur Technische Chemie, Leibniz Universitaẗ Hannover, Callinstrasse 3, D-30167 Hannover, Germany ‡Faculty of Engineering, Osaka Prefecture University, 1 Gakuen-cho, Sakai Osaka 599-8531, Japan Key Lab for Advanced Materials and Institute of Fine Chemicals, East China University of Science and Technology, Shanghai 200237, China

Understanding TiO2 photocatalysis: mechanisms and materials.

The use of solar energy to produce molecular hydrogen and oxygen (H2 and O2) from overall water splitting is a promising means of renewable energy storage. In the past 40 years, various inorganic and organic systems have been developed as photocatalysts for water splitting driven by visible light. These photocatalysts, however, still suffer from low quantum efficiency and/or poor stability. We report the design and fabrication of a metal-free carbon nanodot-carbon nitride (C3N4) nanocomposite and demonstrate its impressive performance for photocatalytic solar water splitting. We measured quantum efficiencies of 16% for wavelength λ = 420 ± 20 nanometers, 6.29% for λ = 580 ± 15 nanometers, and 4.42% for λ = 600 ± 10 nanometers, and determined an overall solar energy conversion efficiency of 2.0%. The catalyst comprises low-cost, Earth-abundant, environmentally friendly materials and shows excellent stability.

http://science.sciencemag.org/content/sci/347/6225/970.full.pdf

Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway

Semiconductor photocatalysis has received much attention as a potential solution to the worldwide energy shortage and for counteracting environmental degradation. This article reviews state-of-the-art research activities in the field, focusing on the scientific and technological possibilities offered by photocatalytic materials. We begin with a survey of efforts to explore suitable materials and to optimize their energy band configurations for specific applications. We then examine the design and fabrication of advanced photocatalytic materials in the framework of nanotechnology. Many of the most recent advances in photocatalysis have been realized by selective control of the morphology of nanomaterials or by utilizing the collective properties of nano-assembly systems. Finally, we discuss the current theoretical understanding of key aspects of photocatalytic materials. This review also highlights crucial issues that should be addressed in future research activities.

Nano‐photocatalytic Materials: Possibilities and Challenges

The photodecomposition of water vapour proceeds steadily for more than 100 h on NiO–SrTiO3 powder and stops immediately when the water vapour is removed.

Photocatalytic decomposition of water vapour on an NiO–SrTiO3 catalyst

The hydrogenation of acetylene and ethylene was studied on Au/Al2O3 catalyst. Acetylene and hydrogen reacted readily to produce ethylene, but not to ethane on the catalyst in the temperature range between 313 and 523 K. The hydrogenation of ethylene on the catalyst occurred only at much higher temperatures over 573 K. The activity of the selective hydrogenation of acetylene over Au/Al2O3 catalyst depends on the size of ultrafine gold particles of Au/Al2O3 catalyst, which showed a maximum at about 3.0 nm in diameter.

Selective Hydrogenation of Acetylene over Au/Al2O3 Catalyst

It is shown that cobalt and nickel phthalocyanines are active catalysts for the electrode reduction of carbon dioxide.

Kenzi Tamaru

Papers

Photocatalytic decomposition of water vapour on an NiO–SrTiO3 catalyst

Selective Hydrogenation of Acetylene over Au/Al2O3 Catalyst

Electrocatalysis by metal phthalocyanines in the reduction of carbon dioxide

The mechanism of the reaction between NOx and NH3 on V2O5 in the presence of oxygen

Photocatalytic decomposition of liquid water on a NiOSrTiO3 catalyst