scispace - formally typeset
Search or ask a question
Author

Kwai-Man Luk

Bio: Kwai-Man Luk is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Microstrip antenna & Patch antenna. The author has an hindex of 67, co-authored 634 publications receiving 17638 citations. Previous affiliations of Kwai-Man Luk include University of Akron & University of Missouri.


Papers
More filters
01 Jun 2006
TL;DR: In this article, a planar electric dipole and a shorted patch antenna were used to achieve a wideband unidirectional antenna composed of a short-patch antenna.
Abstract: A novel wideband unidirectional antenna composed of a planar electric dipole and a shorted patch antenna is presented. The antenna is excited by a Γ-shaped strip feed line. A wide impedance bandwidth of 43.8% (SWR≤1.5) from the frequency of 1.85 to 2.89 GHz is achieved. Stable radiation pattern with low cross- polarization, low backlobe radiation, nearly identical E-and H-plane patterns and an antenna gain of ~8dBi is found across the entire operating bandwidth.

486 citations

Journal ArticleDOI
TL;DR: In this paper, the characteristics of a rectangular microstrip antenna with an L-shaped probe are investigated and a foam layer with a thickness of around 10% of the wavelength is used as the supporting substrate.
Abstract: The characteristics of a rectangular microstrip antenna with an L-shaped probe are investigated. A foam layer with a thickness of around 10% of the wavelength is used as the supporting substrate. An impedance bandwidth of 35% and an average gain of 7.5 dBi can be achieved. The radiation pattern is stable across the passband.

455 citations

Journal ArticleDOI
01 Oct 1997
TL;DR: In this paper, the U-slot patch on a foam substrate of about 0.08/spl lambda/thick was designed to attain 20-30% impedance as well as gain bandwidth.
Abstract: Experimental and simulation results are presented on the coaxially fed rectangular patch antenna with a U-shaped slot. Experimental results include impedance bandwidth, copolar- and crosspolar-pattern characteristics and gain measurements. Simulation results are obtained mainly through the development of a FDTD code. It is found that the U-slot patch on a foam substrate of about 0.08/spl lambda/ thick can be designed to attain 20-30% impedance as well as gain bandwidths without the need of parasitic patches on another layer or on the same layer. The far-field patterns have good copolar and crosspolar characteristics. By altering the patch width or feed position, the wideband characteristic can be changed into a dual-frequency characteristic. Simulation results are in good agreement with measurements.

413 citations

Journal ArticleDOI
TL;DR: In this paper, the L-shaped probe is shown to be an attractive feed for the thick microstrip antenna (thickness around 10% of the operating wavelength), and a parametric study on the rectangular patch antenna is presented.
Abstract: The L-shaped probe is shown to be an attractive feed for the thick microstrip antenna (thickness around 10% of the operating wavelength). A parametric study on the rectangular patch antenna is presented. It is found that the antenna attains 36% impedance bandwidth (SWR/spl les/2) as well as gain bandwidth and about 7-dBi average gain. A two-element array fed by L-probes is also proposed. Experiments show that the array design can substantially suppress the cross polarization of the proposed antenna. Both the antennas have stable radiation patterns across the passband. Moreover, the measured resonant frequencies of the proposed antenna agree well with an existing formula and the L-probe does not have much effect on the resonant frequency.

382 citations

Journal ArticleDOI
TL;DR: In this article, a broadband U-slot rectangular patch antenna printed on a microwave substrate is investigated, and the characteristics of the antenna are analyzed by the finite-difference time-domain (FDTD) method.
Abstract: A broad-band U-slot rectangular patch antenna printed on a microwave substrate is investigated. The dielectric constant of the substrate is 2.33. The antenna is fed by a coaxial probe. The characteristics of the U-slot patch antenna are analyzed by the finite-difference time-domain (FDTD) method. Experimental results for the input impedance and radiation patterns are obtained and compared with numerical results. The maximum impedance bandwidth achieved is 27%, centered around 3.1 GHz, with good pattern characteristics.

286 citations


Cited by
More filters
Book
15 Jan 2002
TL;DR: In this paper, the authors present an overview of the most recent advances in regular-size Dual-Frequency Antennas and their application in a wide range of applications, including: 1.1 Introduction.
Abstract: Preface. 1. Introduction and Overview. 1.1 Introduction. 1.2 Compact Microstrip Antennas. 1.3 Compact Broadband Microstrip Antennas. 1.4 Compact Dual-Frequency Microstrip Antennas. 1.5 Compact Dual-Polarized Microstrip Antennas. 1.6 Compact Circularly Polarized Microstrip Antennas. 1.7 Compact Microstrip Antennas with Enhanced Gain. 1.8 Broadband Microstrip Antennas. 1.9 Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 1.10 Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 2. Compact Microstrip Antennas. 2.1 Introduction. 2.2 Use of a Shorted Patch with a Thin Dielectric Substrate. 2.3 Use of a Meandered Patch. 2.4 Use of a Meandered Ground Plane. 2.5 Use of a Planar Inverted-L Patch. 2.6 Use of an Inverted U-Shaped or Folded Patch. 3. Compact Broadband Microstrip Antennas. 3.1 Introduction. 3.2 Use of a Shorted Patch with a Thick Air Substrate. 3.3 Use of Stacked Shorted Patches. 3.4 Use of Chip-Resistor and Chip-Capacitor Loading Technique. 3.5 Use of a Slot-Loading Technique. 3.6 Use of a Slotted Ground Plane. 4. Compact Dual-Frequency and Dual-Polarized Microstrip Antennas. 4.1 Introduction. 4.2 Some Recent Advances in Regular-Size Dual-Frequency Designs. 4.3 Compact Dual-Frequency Operation with Same Polarization Planes. 4.4 Compact Dual-Frequency Operation. 4.5 Dual-Band or Triple-Band PIFA. 4.6 Compact Dual-Polarized Designs. 5. Compact Circularly Polarized Microstrip Antennas. 5.1 Introduction. 5.2 Designs with a Cross-Slot of Unequal Arm Lengths. 5.3 Designs with a Y-Shaped Slot of Unequal Arm Lengths. 5.4 Designs with Slits. 5.5 Designs with Spur Lines. 5.6 Designs with Truncated Corners. 5.7 Designs with Peripheral Cuts. 5.8 Designs with a Tuning Stub. 5.9 Designs with a Bent Tuning Stub. 5.10 Compact CP Designs with an Inset Microstrip-Line Feed. 6. Compact Microstrip Antennas with Enhanced Gain. 6.1 Introduction. 6.2 Compact Microstrip Antennas with High-Permittivity Superstrate. 6.3 Compact Microstrip Antennas with Active Circuitry. 7. Broadband Microstrip Antennas. 7.1 Introduction. 7.2 Use of Additional Microstrip Resonators. 7.3 Microstrip Antennas with an Air Substrate. 7.4 Broadband Slot-Loaded Microstrip Antennas. 7.5 Broadband Microstrip Antennas with an Integrated Reactive Loading. 7.6 Broadband Microstrip Antennas with Reduced Cross-Polarization Radiation. 8. Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 8.1 Introduction. 8.2 Broadband Dual-Frequency Microstrip Antennas. 8.3 Broadband Dual-Polarized Microstrip Antennas. 9. Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 9.1 Introduction. 9.2 Broadband Single-Feed Circularly Polarized Microstrip Antennas. 9.3 Broadband Two-Feed Circularly Polarized Microstrip Antennas. 9.4 Broadband Four-Feed Circularly Polarized Microstrip Antennas. 9.5 Dual-Band Circularly Polarized Microstrip Antennas. Index.

1,734 citations

Book
01 Oct 2002
TL;DR: In this article, the authors provide an exhaustive coverage of broadband techniques, including the most up-to-date information to help users choose and design the optimum broadband microstrip antenna configurations without sacrificing other antenna parameters.
Abstract: Look to this new, cutting-edge microstrip antenna book for the first exhaustive coverage of broadband techniques, including the most up-to-date information to help you choose and design the optimum broadband microstrip antenna configurations for your applications, without sacrificing other antenna parameters. The book shows you how to take advantage of the lightweight, low volume benefits of these antennas, by providing clear explanations of the various configurations and simple design equations that help you analyze and design microstrip antennas with speed and confidence. This practical resource offers you a comprehensive understanding of the radiation mechanism and characteristic of microstrip antennas, and provides guidance in designing new types of planar monopole antennas with multi-octave bandwidth. You learn how to select and design proper broadband microstrip antenna configurations for compact, tunable, dual-band and circular polarization applications. Moreover, the book compares all the broadband techniques and suggests the most attractive configuration. Extensively referenced with over 300 illustrations and 140 equations.

1,436 citations

Journal ArticleDOI
TL;DR: In this paper, a mushroom-like E-plane coupled E-strip antenna array on a thick and high permittivity substrate has been analyzed using the finite-difference time-domain (FDTD) method.
Abstract: Utilization of electromagnetic band-gap (EBG) structures is becoming attractive in the electromagnetic and antenna community. In this paper, a mushroom-like EBG structure is analyzed using the finite-difference time-domain (FDTD) method. Its band-gap feature of surface-wave suppression is demonstrated by exhibiting the near field distributions of the electromagnetic waves. The mutual coupling of microstrip antennas is parametrically investigated, including both the E and H coupling directions, different substrate thickness, and various dielectric constants. It is observed that the E-plane coupled microstrip antenna array on a thick and high permittivity substrate has a strong mutual coupling due to the pronounced surface waves. Therefore, an EBG structure is inserted between array elements to reduce the mutual coupling. This idea has been verified by both the FDTD simulations and experimental results. As a result, a significant 8 dB mutual coupling reduction is noticed from the measurements.

1,394 citations

Book
03 Jan 2018
TL;DR: This monograph summarizes many years of research insights in a clear and self-contained way and providest the reader with the necessary knowledge and mathematical toolsto carry out independent research in this area.
Abstract: Massive multiple-input multiple-output MIMO is one of themost promising technologies for the next generation of wirelesscommunication networks because it has the potential to providegame-changing improvements in spectral efficiency SE and energyefficiency EE. This monograph summarizes many years ofresearch insights in a clear and self-contained way and providesthe reader with the necessary knowledge and mathematical toolsto carry out independent research in this area. Starting froma rigorous definition of Massive MIMO, the monograph coversthe important aspects of channel estimation, SE, EE, hardwareefficiency HE, and various practical deployment considerations.From the beginning, a very general, yet tractable, canonical systemmodel with spatial channel correlation is introduced. This modelis used to realistically assess the SE and EE, and is later extendedto also include the impact of hardware impairments. Owing tothis rigorous modeling approach, a lot of classic "wisdom" aboutMassive MIMO, based on too simplistic system models, is shownto be questionable.

1,352 citations

Journal ArticleDOI
TL;DR: PlatEMO as discussed by the authors is a MATLAB platform for evolutionary multi-objective optimization, which includes more than 50 multiobjective evolutionary algorithms and more than 100 multobjective test problems, along with several widely used performance indicators.
Abstract: Over the last three decades, a large number of evolutionary algorithms have been developed for solving multi-objective optimization problems. However, there lacks an upto-date and comprehensive software platform for researchers to properly benchmark existing algorithms and for practitioners to apply selected algorithms to solve their real-world problems. The demand of such a common tool becomes even more urgent, when the source code of many proposed algorithms has not been made publicly available. To address these issues, we have developed a MATLAB platform for evolutionary multi-objective optimization in this paper, called PlatEMO, which includes more than 50 multiobjective evolutionary algorithms and more than 100 multi-objective test problems, along with several widely used performance indicators. With a user-friendly graphical user interface, PlatEMO enables users to easily compare several evolutionary algorithms at one time and collect statistical results in Excel or LaTeX files. More importantly, PlatEMO is completely open source, such that users are able to develop new algorithms on the basis of it. This paper introduces the main features of PlatEMO and illustrates how to use it for performing comparative experiments, embedding new algorithms, creating new test problems, and developing performance indicators. Source code of PlatEMO is now available at: http://bimk.ahu.edu.cn/index.php?s=/Index/Software/index.html.

915 citations