http://webdelprofesor.ula.ve/odontologia/robertramirez/PDF/17.pdf

Resin composite--state of the art.

http://webdelprofesor.ula.ve/odontologia/robertramirez/PDF/1.pdf

State of the art of self-etch adhesives

https://www.unitau.br/files/arquivos/category_126/Braga_et_al_2005_1455555240.pdf

Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review.

s should clearly state the purpose, brief statement of procedure, results and conclusions. Please include your name, full address and topic on all submissions. At least one author of each abstract should register for the conference. All accepted abstracts will be published as symposium proceedings. Additionally, commended abstracts may be published in a journal after they are expanded to a manuscript followed by extensive reviewing. The language of the conference will be English.

An international symposium

The limited durability of resin-dentin bonds severely compromises the lifetime of tooth-colored restorations Bond degradation occurs via hydrolysis of suboptimally polymerized hydrophilic resin components and degradation of water-rich, resin-sparse collagen matrices by matrix metalloproteinases (MMPs) and cysteine cathepsins This review examined data generated over the past three years on five experimental strategies developed by different research groups for extending the longevity of resin-dentin bonds They include: (1) increasing the degree of conversion and esterase resistance of hydrophilic adhesives; (2) the use of broad-spectrum inhibitors of collagenolytic enzymes, including novel inhibitor functional groups grafted to methacrylate resins monomers to produce anti-MMP adhesives; (3) the use of cross-linking agents for silencing the activities of MMP and cathepsins that irreversibly alter the 3-D structures of their catalytic/allosteric domains; (4) ethanol wet-bonding with hydrophobic resins to completely replace water from the extrafibrillar and intrafibrillar collagen compartments and immobilize the collagenolytic enzymes; and (5) biomimetic remineralization of the water-filled collagen matrix using analogs of matrix proteins to progressively replace water with intrafibrillar and extrafibrillar apatites to exclude exogenous collagenolytic enzymes and fossilize endogenous collagenolytic enzymes A combination of several of these strategies should result in overcoming the critical barriers to progress currently encountered in dentin bonding

Limitations in Bonding to Dentin and Experimental Strategies to Prevent Bond Degradation

A layer of an unfilled adhesive resin placed between the tooth and composite restoration has been shown to absorb some of the stress generated in the composite during polymerization and to reduce interfacial leakage. The objectives of this study were to measure the change in polymerization contraction stress of bonded composite as the thickness of the resin adhesive was systematically varied, and to correlate the effects of the adhesive thickness and reduced stress on marginal leakage in class V cavities. The maximum contraction force of composite (Herculite XRV) was measured in a tensilometer as the thickness of the adhesive bonding agent (Scotchbond MP) was varied from 20 to 300 microm. Composite was placed in Class V cavities prepared on the labial surfaces of bovine teeth to which different thicknesses of adhesive had been applied by layering, and a marginal leakage test was performed by means of staining with silver nitrate. Contraction stress decreased significantly as the adhesive thickness was increased. This result was supported by a theoretical examination of the data. In class V cavities, additional adhesive layering in the marginal area reduced the overall degree of microleakage. The contraction stress generated during the placement of a composite restoration contributes significantly to early marginal leakage, and this stress was significantly absorbed and relieved by the application of an increasing thickness of low-stiffness adhesive.

The Effects of Adhesive Thickness on Polymerization Contraction Stress of Composite

The introduction of many new packable composites suggests that these products are rapidly gaining popularity. The purpose of this study was to evaluate the in vitro properties of a variety of packable composites and to determine if significant enhancements in physical and mechanical properties have been achieved for these materials compared with two popular nonpackable posterior composites. For the five packable and two regular composites tested (ALERT, Pyramid-Dentin, Pyramid-Enamel, Solitaire, SureFil, Heliomolar, and Z100), the values for fracture toughness, flexure strength, flexure modulus, hardness, and volumetric polymerization shrinkage were determined. In general, although the packable composites were of heavier consistency, they had mechanical properties that were intermediate to (ALERT, Pyramid, and SureFil) or lower than (Solitaire) those of the nonpackable materials. These results could have been predicted based on the similar methacrylate resin chemistry and filler volumes of the various composites. No composite had adequate depth-of-cure when tested in increments greater than 2 mm thick. Polymerization contraction of the packable composites was similar to or higher than that of the nonpackable composites. In addition, the radiopacity of at least one material, Solitaire, was not considered to be adequate (less than 2 mm of aluminum). The results of this study suggest that these packable composites are unlikely to offer improved clinical performance over well-placed nonpackable composites.

Properties of Packable Dental Composites

This study evaluated the effects of various cavity configurations on the bond strength, microleakage, flexural strength and elastic modulus of a hybrid (Clearfil AP-X) and a microhybrid (Esthet-X) composite restorative. After the specimens were made with C-factors of less than 1, 2.4 and 3.4, flexural strength and elastic modulus were evaluated in three-point bending using a mechanical testing machine. Fragments of the fractured specimens were selected randomly and the fracture surfaces were examined in SEM. To evaluate the microtensile bond strength and microleakage of composite restorations in bovine cavities, C-factors (ratio of bonded to non-bonded cavity surface) were controlled as 1.0, 2.3, 3.0 and 3.7. All specimens were stored in distilled water at 37 degrees C for 24 hours and tested in a universal testing machine (EZ Test, Shimadzu, Japan). For the microleakage test, teeth with restorations were stained with silver nitrate and examined by two examiners under a stereomicroscope at 40x magnification. The hybrid composite showed higher mechanical properties than the microhybrid composite. The flexural strength and elastic modulus of both composites decreased when polymerized under greater constraint, that is, with increasing C-factor. Mean microtensile bond strength to dentin was also decreased with increasing C-factor for both types of composites. Microleakage scores for the hybrid composite restorations were generally higher than the microhybrid composite.

Effects of cavity configuration on composite restoration.

The influence of chlorhexidine on the remineralization of demineralized dentine

During mineralization, unbound water within the collagen matrix is replaced by apatite. This study tested the null hypothesis that there is no difference in the status of in vitro biomimetic remineralization of hybrid layers, regardless of their moisture contents. Acid-etched dentin was bonded with One-Step with ethanol-wet-bonding, water-wet-bonding, and water-overwet-bonding protocols. Composite-dentin slabs were subjected to remineralization for 1-4 months in a medium containing dual biomimetic analogs, with set Portland cement as the calcium source and characterized by transmission electron microscopy. Remineralization was either non-existent or restricted to the intrafibrillar mode in ethanol-wet-bonded specimens. Extensive intrafibrillar and interfibrillar remineralization was observed in water-wet-bonded specimens. Water-overwet specimens demonstrated partial remineralization of hybrid layers and precipitation of mineralized plates within water channels. The use of ethanol-wet-bonding substantiates that biomimetic remineralization is a progressive dehydration process that replaces residual water in hybrid layers with apatite crystallites.

Kyoung-Kyu Choi

Papers

The Effects of Adhesive Thickness on Polymerization Contraction Stress of Composite

Properties of Packable Dental Composites

Effects of cavity configuration on composite restoration.

The influence of chlorhexidine on the remineralization of demineralized dentine

Implication of Ethanol Wet-bonding in Hybrid Layer Remineralization