Although the field of polymer solar cell has seen much progress in device performance in the past few years, several limitations are holding back its further development For instance, current high-efficiency (>90%) cells are restricted to material combinations that are based on limited donor polymers and only one specific fullerene acceptor Here we report the achievement of high-performance (efficiencies up to 108%, fill factors up to 77%) thick-film polymer solar cells for multiple polymer:fullerene combinations via the formation of a near-ideal polymer:fullerene morphology that contains highly crystalline yet reasonably small polymer domains This morphology is controlled by the temperature-dependent aggregation behaviour of the donor polymers and is insensitive to the choice of fullerenes The uncovered aggregation and design rules yield three high-efficiency (>10%) donor polymers and will allow further synthetic advances and matching of both the polymer and fullerene materials, potentially leading to significantly improved performance and increased design flexibility

/pdf/aggregation-and-morphology-control-enables-multiple-cases-of-37iznlawg4.pdf

Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells.

Recent Advances in Bulk Heterojunction Polymer Solar Cells

https://cyberleninka.org/article/n/1316165.pdf

Nanocellulose in biomedicine: Current status and future prospect

During the last few years, transition metal oxides (TMO) such as molybdenum tri-oxide (MoO3), vanadium pent-oxide (V2O5) or tungsten tri-oxide (WO3) have been extensively studied because of their exceptional electronic properties for charge injection and extraction in organic electronic devices. These unique properties have led to the performance enhancement of several types of devices and to a variety of novel applications. TMOs have been used to realize efficient and long-term stable p-type doping of wide band gap organic materials, charge-generation junctions for stacked organic light emitting diodes (OLED), sputtering buffer layers for semi-transparent devices, and organic photovoltaic (OPV) cells with improved charge extraction, enhanced power conversion efficiency and substantially improved long term stability. Energetics in general play a key role in advancing device structure and performance in organic electronics; however, the literature provides a very inconsistent picture of the electronic structure of TMOs and the resulting interpretation of their role as functional constituents in organic electronics. With this review we intend to clarify some of the existing misconceptions. An overview of TMO-based device architectures ranging from transparent OLEDs to tandem OPV cells is also given. Various TMO film deposition methods are reviewed, addressing vacuum evaporation and recent approaches for solution-based processing. The specific properties of the resulting materials and their role as functional layers in organic devices are discussed.

Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

Organic Optoelectronic Materials: Mechanisms and Applications

Bulk heterojunction (BHJ) polymer solar cells (PSCs) that can be fabricated by solution processing techniques are under intense investigation in both academic institutions and industrial companies because of their potential to enable mass production of flexible and cost-effective alternative to silicon-based solar cells. A combination of novel polymer development, nanoscale morphology control and processing optimization has led to over 8% power conversion efficiencies (PCEs) for BHJ PSCs with a conventional device structure. Attempts to develop PSCs with an inverted device structure as required for achieving high PECs and good stability have, however, met with limited success. Here, we report that a high PCE of 8.4% under AM 1.5G irradiation was achieved for BHJ PSCs with an inverted device structure. This high efficiency was obtained through interfacial engineering of solution-processed electron extraction layer, leading to facilitate electron transport and suppress bimolecular recombination. These results provided an important progress for solution-processed PSCs, and demonstrated that PSCs with an inverted device structure are comparable with PSCs with the conventional device structure.

Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte

Recent advances in liposome surface modification for oral drug delivery

Bacterial cellulose (BC) membranes are used as the carrier for berberine hydrochloride and berberine sulphate to produce a new controlled release system. Release studies and transdermal experiments were carried out in vitro. Carrier BC can significantly extend the drug release time, in contrast to existing commercial carriers. Freeze-dried BC membranes 10 mm thick were optimized for drug delivery. The lowest release rate was in simulated gastric fluid (SGF) or in H2SO4 solution, the highest in simulated intestinal fluid (SIF) and an intermediate rate was found in alkaline conditions. The release curves closely followed the Ritger-Peppas model with free diffusion the most prominent mechanism. Scanning electron microscopy (SEM) analysis demonstrated that BC fibers were swollen in acid and base conditions. H-1 high-resolution magic angle spinning nuclear magnetic resonance (H-1 HRMAS NMR) diffusion-ordered spectroscopy (DOSY) analysis showed that there was an interaction between the drugs and BC. The structure of BC, the media and the solubility of the drug all influenced the sustained-release behavior. The results from the release studies, the electron micrographs, and the transdermal experiments were in good agreement.

Nano-cellulose 3D-networks as controlled-release drug carriers

Polymer Solar Cells with a Low-Temperature-Annealed Sol–Gel-Derived MoOx Film as a Hole Extraction Layer

Berberine hydrochloride (BH) possesses various pharmacological properties including anticancer; unfortunately, it has low oral bioavailability and potential side effects for its parenteral administration. Nanoscale delivery carriers can increase the oral bioavailability of BH. Chitosan has interesting biopharmaceutical properties such as nontoxicity, biocompatibility, biodegradability, and mucoadhesiveness, and the ability to open epithelial tight junctions. This study aims to engineer a chitosan-coated nano-liposomal carrier for the oral delivery of BH. The engineered formulation had a size in the nanoscale range. Chitosan-coated nano-liposomes displayed better stability and slower BH release in the simulated gastrointestinal (GI) environment as compared to the uncoated ones. All values of pharmacokinetic analysis for chitosan-coated nano-liposomes were higher than for uncoated ones. These findings demonstrate that chitosan-coated nano-liposomes are more efficient than uncoated ones for the oral delivery of BH. It can be concluded that the stability and delayed BH release in the simulated GI environment were improved with engineered chitosan-coated nano-liposomes. Moreover, since desirable in vitro and in vivo characteristics were achieved, they are promising release devices for the oral delivery of BH increasing the bioavailability of the drug.

Lin Huang

Papers

Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte

Recent advances in liposome surface modification for oral drug delivery

Nano-cellulose 3D-networks as controlled-release drug carriers

Polymer Solar Cells with a Low-Temperature-Annealed Sol–Gel-Derived MoOx Film as a Hole Extraction Layer

Chitosan-coated nano-liposomes for the oral delivery of berberine hydrochloride