KEGG(Kyoto Encyclopedia of Genes and Genomes)〔和文〕 (特集 ゲノム医学の現在と未来--基礎と臨床) -- (データベース)

https://cyberleninka.org/article/n/768408.pdf

Mechanical properties of graphene and graphene-based nanocomposites

Mechanical and chemical recycling of solid plastic waste.

https://hal.archives-ouvertes.fr/hal-02119698/document

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions

Biofilm refers to the complex, sessile communities of microbes found either attached to a surface or buried firmly in an extracellular matrix as aggregates. The biofilm matrix surrounding bacteria makes them tolerant to harsh conditions and resistant to antibacterial treatments. Moreover, the biofilms are responsible for causing a broad range of chronic diseases and due to the emergence of antibiotic resistance in bacteria it has really become difficult to treat them with efficacy. Furthermore, the antibiotics available till date are ineffective for treating these biofilm related infections due to their higher values of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC), which may result in in-vivo toxicity. Hence, it is critically important to design or screen anti-biofilm molecules that can effectively minimize and eradicate biofilm related infections. In the present article, we have highlighted the mechanism of biofilm formation with reference to different models and various methods used for biofilm detection. A major focus has been put on various anti-biofilm molecules discovered or tested till date which may include herbal active compounds, chelating agents, peptide antibiotics, lantibiotics and synthetic chemical compounds along with their structures, mechanism of action and their respective MICs, MBCs, minimum biofilm inhibitory concentrations (MBICs) as well as the half maximal inhibitory concentration (IC50) values available in the literature so far. Different mode of action of anti biofilm molecules addressed here are inhibition via interference in the quorum sensing pathways, adhesion mechanism, disruption of extracellular DNA, protein, lipopolysaccharides, exopolysaccharides and secondary messengers involved in various signaling pathways. From this study, we conclude that the molecules considered here might be used to treat biofilm-associated infections after significant structural modifications, thereby investigating its effective delivery in the host. It should also be ensured that minimum effective concentration of these molecules must be capable of eradicating biofilm infections with maximum potency without posing any adverse side effects on the host.

https://www.tandfonline.com/doi/pdf/10.1080/21505594.2017.1313372

Strategies for combating bacterial biofilms: A focus on anti-biofilm agents and their mechanisms of action

Degradation of polymer blends: A brief review

Polyethylene-co-vinylacetate (EVA) films with different concentrations (3.5 wt% and 7 wt%) of essential oil constituents, carvacrol or cinnamaldehyde, were prepared and characterized by mechanical, antibacterial and antibiofilm properties. The incorporation of the compounds into copolymer films affected their elastic modulus, tensile stress and elongation at break. Carvacrol and cinnamaldehyde act as plasticizers which reduce the intermolecular forces of polymer chains, thus improving the flexibility and extensibility of the film. The analysis of the surface characteristics demonstrated that essential oil constituents lowered the contact angle values without causing any remarkable variation of the surface roughness. The films allowed progressive diffusion of the bioactive molecules and the kinetic of release was correlated with the damaging effect on bacterial growth. The kill curves proved that the film with essential oil constituents (7 wt%) had a significant bactericidal effect (reduction of 4 and 2 log CFU) against Staphylococcus aureus and Escherichia coli and a bacteriostatic effect against Staphylococcus epidermidis and Listeria monocytogenes (reduction of about 1 log CFU). With regard to biofilm formation the biomass formed on polymeric films surface was significantly reduced if compared with the pure copolymer control. The results were confirmed by fluorescence microscopy images by Live/dead staining. The reduction in the surface tension coupled to an inherent bactericidal property of carvacrol and cinnamaldehyde could in turn affect the initial attachment phase of bacteria and compromise the normal biofilm development.

Study on carvacrol and cinnamaldehyde polymeric films: mechanical properties, release kinetics and antibacterial and antibiofilm activities

The development of green nanocomposites based on biopolymers and bio-based nanofillers has attracted over the recent years the attention of academic and industrial research. Indeed, these nanocomposites could replace some oil-derived polymers and thus helping to overcome environmental problems. In this regard, PLA as matrix and polysaccharide nanocrystals as fillers are the most promising components to obtain high-performance green bio-nanocomposites suitable for different applications, particularly for packaging and biomedical applications. Indeed, at present, due to its processability, mechanical and biological properties, as well as its commercial availability, poly(lactic acid) (PLA) possesses one of the highest potentials among biopolymers whereas polysaccharide nanocrystals can be considered the most promising bio-based reinforcements due to their availability, renewability, versatility, biodegradability and high aspect ratio. Aim of this review is to give an overview on the preparation routes and main properties of PLA/polysaccharide nanocomposites highlighting the main differences among the three main polysaccharide nanocrystals, i.e. cellulose, chitin, and starch.

Polysaccharide nanocrystals as fillers for PLA based nanocomposites

Graphene nanoplatelets (GnP) as filler and ciprofloxacin (CFX) as biocide were incorporated via melt-compounding into poly(lactic acid) (PLA) to obtain biopolymer-based nanocomposites with antimicrobial properties. GnP were added with the aim of improving the mechanical properties of the antimicrobial system and tuning the drug release. The obtained systems were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. Furthermore, rheological measurements were performed. The morphology of the samples was analyzed through scanning electron microscopy (SEM). Moreover, a mathematical model, i.e. power law model, was used to fit the release data in order to investigate the release mechanism. The results showed that the obtained nanocomposite systems exhibit antimicrobial activity. The incorporation of GnP increased the stiffness of the matrix and allowed to reduce the burst release effect.

PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent

Polycaprolactone (PCL) biocomposite nanofiber scaffolds with different concentrations of graphene oxide (GO) and GO surface grafted with poly(ethylene glycol) (GO-g-PEG) were prepared by electrospinning. Morphological, mechanical as well as wettability characterizations of electrospun nanofibers were carried out. Results showed that the average diameter of PLA/GO electrospun nanofibers decreased upon increasing the filler content. Differently, the diameter increased while using GO-g-PEG. Both nanofillers enhanced the electrospun PCL hydrophilicity even if PCL/GO-g-PEG samples exhibited improved wettability. The Young moduli of the composite nanofiber mats were improved by adding GO, and it was further enhanced when GO was surface grafted with PEG, in particular at low concentrations. This suggests the improved dispersion of GO-g-PEG due to the surface grafting with PEG. Furthermore, in order to assess the potential applications of the electrospun nanofibers in tissue engineering, MC3T3-E1 cells were cultured on PCL and PCL/GO-g-PEG scaffolds, thus providing preliminary and comparative proliferation rate assays.

Luigi Botta

Papers

Degradation of polymer blends: A brief review

Study on carvacrol and cinnamaldehyde polymeric films: mechanical properties, release kinetics and antibacterial and antibiofilm activities

Polysaccharide nanocrystals as fillers for PLA based nanocomposites

PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent

Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships