Economic reasons (material and energy saving) leads to make efforts for making more efficient heat exchange. The heat transfer enhancement techniques are widely used in many applications in the heating process to make possible reduction in weight and size or enhance the performance of heat exchangers. These techniques are classified as active and passive techniques. The active technique required external power while the passive technique does not need any external power. The passive techniques are valuable compared with the active techniques because the swirl inserts manufacturing process is simple and can be easily employed in an existing heat exchanger. Insertion of swirl flow devices enhance the convective heat transfer by making swirl into the bulk flow and disrupting the boundary layer at the tube surface due to repeated changes in the surface geometry. An effort has been made in this paper to carry out an extensive literature review of various turbulators (coiled tubes, extended surfaces (fin, louvered strip, winglet), rough surfaces (Corrugated tube, Rib) and swirl flow devices such as twisted tape, conical ring, snail entry turbulator, vortex rings, coiled wire) for enhancing heat transfer in heat exchangers. It can be concluded that wire coil gives better overall performance if the pressure drop penalty is considered. The use of coiled square wire turbulators leads to a considerable increase in heat transfer and friction loss over those of a smooth wall tube.

Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices

The objective of this paper is to review the different techniques, which have been used to enhance the heat transfer rate in heat exchanger devices such as solar air heater, cooling blades of turbine and so on using single phase heat transfer fluids. The results of recent published articles with the development of new technologies such as Electrohydrodynamic (EHD) and Magnetohydrodynamics (MHD) are also included. Enhancement of heat transfer in heat exchanger can achieved by means of several techniques. These techniques are grouped into the active and passive method. In the active methods, system need some external power, however, passive method utilize surface modification either on heated surface or insertion of swirl devices in the flow field. Active methods are very complex because of external power supply, although these methods have great potential and can control thermally. Passive methods include artificial roughness, extended surface, winglets, insertion of swirl devices in the flow which alters the flow pattern causes to disturb the thermal boundary layer, and consequently high heat transfer. Passive methods are dominant over active methods because its can easily employed in existing heat exchangers. In this paper, an effort has been made to categorize the active and passive methods and review the various heat transfer techniques applied in heat exchangers. Important results have been listed for ready reference. It has been concluded that either active or passive methods have been employed alone. Based on literature, a combined method have also been recommended which include both active and passive methods.

A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications

Enhancing the optical and thermal efficiency of a parabolic trough collector – A review

/pdf/the-heat-transfer-enhancement-techniques-and-their-thermal-4i8fjyterw.pdf

M. Shahabuddin

Papers

Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts

Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts