Liming Dai,*,†,‡ Yuhua Xue,†,‡ Liangti Qu,* Hyun-Jung Choi, and Jong-Beom Baek* †Center of Advanced Science and Engineering for Carbon (Case4Carbon), Department of Macromolecular Science and Engineering, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, Ohio 44106, United States Key Laboratory of Cluster Science, Ministry of Education of China, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, Department of Chemistry, School of Science, Beijing Institute of Technology, Beijing 100081, People’s Republic of China School of Energy and Chemical Engineering/Center for Dimension-Controllable Covalent Organic Frameworks, Ulsan National Institute of Science and Technology (UNIST), 100 Banyeon, Ulsan, 689-798, South Korea

Metal-free catalysts for oxygen reduction reaction.

This article provides an up-to-date perspective on the use of anion-exchange membranes in fuel cells, electrolysers, redox flow batteries, reverse electrodialysis cells, and bioelectrochemical systems (e.g. microbial fuel cells). The aim is to highlight key concepts, misconceptions, the current state-of-the-art, technological and scientific limitations, and the future challenges (research priorities) related to the use of anion-exchange membranes in these energy technologies. All the references that the authors deemed relevant, and were available on the web by the manuscript submission date (30th April 2014), are included.

/pdf/anion-exchange-membranes-in-electrochemical-energy-systems-46uquenb56.pdf

Anion-exchange membranes in electrochemical energy systems

Anion exchange membranes for alkaline fuel cells: A review

Metal-organic framework (MOF) materials, which are constructed from metal ions or metal ion clusters and bridging organic linkers, exhibit regular crystalline lattices with relatively well-defined pore structures and interesting properties. As a new class of porous solid materials, MOFs are attractive for a variety of industrial applications including separation membranes - a rapidly developing research area. Many reports have discussed the synthesis and applications of MOFs and MOF thin films, but relatively few have addressed MOF membranes. This critical review provides an overview of the diverse MOF membranes that have been prepared, beginning with a brief introduction to the current techniques for the fabrication of MOF membranes. Gas and liquid separation applications with different MOF membranes are also included (175 references).

Metal–organic framework membranes: from synthesis to separation application

Recent development of polymer electrolyte membranes for fuel cells.

Hydrogen proton exchange membrane fuel cells (PEMFCs) have been demonstrated to have high power density and reasonable energy density. Their commercialization, however, has been hampered by the high cost and low durability of their electrocatalysts. By switching from an acidic medium to a basic one, hydroxide (OH ) exchange membrane fuel cells (HEMFCs) have the potential to solve the problems of catalyst cost and durability while achieving high power and energy density. In a basic environment, the cathode oxygen reduction over-potential can be significantly reduced, leading to high fuel cell efficiency, and catalysts in basic medium are also more durable. In addition, the facile cathode kinetics allows nonprecious metals to be used as catalysts, thus drastically reducing the cost of the fuel cell. Further, HEMFCs can offer fuel flexibility (e.g., methanol, ethanol, ethylene glycol, etc.) because of their low overpotential for hydrocarbon fuel oxidation and reduced fuel crossover. One of the most significant problems for HEMFCs is the lack of a soluble ionomer that can be used in the catalyst layer to build an efficient three-phase boundary and thus drastically improve the utilization of the catalyst particles and reduce the internal resistance. One of the most desirable properties of an ionomer for use in the catalyst layer is high solubility in low-boiling-point water-soluble solvents such as ethanol and (nor 2-)propanol, because these solvents are easy and safe to handle and remove during the electrode preparation. The ionomer should also have high hydroxide conductivity and alkaline stability. For PEMFCs, Nafion has been the ionomer of choice because it meets these requirements. But for HEMFCs, the most commonly used material for the hydroxide exchange membrane (HEM) is a quaternary ammonium hydroxide containing polymer that has poor solubility in the aforementioned simple solvents, low hydroxide conductivity, and poor alkaline stability. For example, Tokuyama Co. very recently reported two types of soluble quaternary ammonium hydroxide containing polymers (product code: A3Ver2, soluble in tetrahydrofuran or n-propanol, and AS-4, soluble in n-propanol); however, as a result of their low hydroxide conductivity, their incorporation into the catalyst layers of HEMFCs only led to a moderate improvement in performance. In another case, Park et al. prepared an ionomer solution of the trimethylamine (TMA) and N,N,N’,N’-tetramethyl-1,6-hexanediamine (TMHDA) based polysulfone– methylene quaternary ammonium hydroxide (T/TPQAOH) in dimethylacetamide (DMAc, b.p. 166 8C). Similar to the Tokuyama results, the low hydroxide conductivity of the ionomer significantly limited the improvement in fuel cell performance, and in addition, removal of the high-boilingpoint solvent is considered difficult and unsafe in the presence of finely dispersed catalysts. Owing to the lack of a soluble highly conductive solid ionomer, aqueous solutions of KOH or NaOH have been previously used in the electrodes, where the introduction of metal cations (M) offsets the key advantages of a HEMFC over traditional liquid-electrolytebased alkaline fuel cells (AFCs). Furthermore, owing to the lack of a good ionomer as the binder, non-ionic conductive PTFE and proton-conductive Nafion ionomers were used as substitutes in the electrodes, even though these materials were known to have no hydroxide conductivity. Recently, Varcoe et al. reported a TMHDA-based polyvinylbenzylcrosslinked quaternary ammonium hydroxide (TPCQAOH) electrochemical interface to enhance HEMFC performance. Because the polymer used was not soluble in ionomer form, one could question its ability to form an efficient three-phase-boundary structure in the catalyst layer, thereby limiting performance. Moreover, the hydroxide conductivity and stability of the electrochemical interface are still of concern because it is based on quaternary ammonium hydroxide groups. Quaternary phosphonium containing polymers showed excellent solubility in methanol. The strong basicity of the tertiary phosphine suggests that quaternary phosphonium hydroxides are very strong bases. Therefore in this work, we synthesized a new quaternary phosphonium based ionomer that is soluble in low-boiling-point water-soluble solvents and is highly hydroxide conductive: tris(2,4,6-trimethoxyphenyl) polysulfone-methylene quaternary phosphonium hydroxide (TPQPOH; Scheme 1). The TPQPOH ionomer exhibits excellent solubility in pure methanol, ethanol, and n-propanol and in their aqueous solutions (50 wt% in water, see Table S1 in the Supporting Information). On the other hand, the TPQPOH is insoluble in pure water, even at 80 8C, suggesting that it can be used in the [*] Dr. S. Gu, Dr. R. Cai, T. Luo, Dr. Z. Chen, M. Sun, Y. Liu, Prof. Dr. Y. S. Yan Department of Chemical and Environmental Engineering University of California—Riverside Riverside, CA 92521 (USA) Fax: (+1)951-827-5696 E-mail: yushan.yan@ucr.edu Homepage: http://www.engr.ucr.edu/faculty/chemenv/ yushanyan.html

https://www.onlinelibrary.wiley.com/doi/pdf/10.1002/anie.200806299

A Soluble and Highly Conductive Ionomer for High‐Performance Hydroxide Exchange Membrane Fuel Cells

Mechanical and dielectric properties of pure-silica-zeolite low-k materials.

The synthesis of organic-functionalized pure-silica-zeolites (PSZs) with MFI- and MEL-type structures for low-k applications prepared through a direct-synthesis method by adding a fluorinated silane to the synthesis solution is reported. The added fluorine functionality increases the hydrophobicity of the zeolites, which are characterized by scanning electron microscopy, X-ray diffraction, 29Si and 19F solid-state NMR spectroscopy, nitrogen adsorption, and thermogravimetric analysis. The functionalized zeolite powders have low water content and calcined spin-on films prepared from the functionalized nanoparticle suspensions exhibit higher water contact angles and lower k values (2.1 and 1.8 for the functionalized MFI- and MEL-type zeolites, respectively) than PSZ films. The use of a direct-synthesis method to decrease the moisture adsorption in the films eliminates the extra post-spin-on silylation steps that are traditionally used to render the zeolite films hydrophobic.

Pure-Silica-Zeolite MFI and MEL Low-Dielectric-Constant Films with Fluoro-Organic Functionalization

A MEL-type pure-silica zeolite (PSZ), prepared by spin-on of nanoparticle suspensions, has been shown to be a promising ultra-low-dielectric-constant (k) material because of its high mechanical strength, hydrophobicity, and chemical stability. In our previous works, a two-stage synthesis method was used to synthesize a MEL-zeolite nanoparticle suspension, in which both nanocrystal yield and particle size of the zeolite suspension increased with increasing synthesis time. For instance, at a crystal yield of 63%, the particle size is 80 nm, which has proved to be too large because it introduces a number of problems for the spin-on films, including large surface roughness, surface striations, and large mesopores. In the current study, the two-stage synthesis method is modified into an evaporation-assisted two-stage method by adding a solvent-evaporation process between the two thermal-treatment steps. The modified method can yield much smaller particle sizes (e.g., 14 vs. 80 nm) while maintaining the same nanocrystal yields as the two-stage synthesis. Furthermore, the nanoparticle suspensions from the evaporation-assisted two-stage synthesis show a bimodal particle size distribution. The primary nanoparticles are around 14 nm in size and are stable in the final suspension with 60% solvent evaporation. The factors that affect nanocrystal synthesis are discussed, including the concentration, pH value, and viscosity. Spin-on films prepared by using suspensions synthesized this way have no striations and improved elastic modulus (9.67 ± 1.48 GPa vs. 7.82 ± 1.30 GPa), as well as a similar k value (1.91 ± 0.09 vs. 1.89 ± 0.08) to the previous two-stage synthesized films.

Minwei Sun

Papers

A Soluble and Highly Conductive Ionomer for High‐Performance Hydroxide Exchange Membrane Fuel Cells

Mechanical and dielectric properties of pure-silica-zeolite low-k materials.

Pure-Silica-Zeolite MFI and MEL Low-Dielectric-Constant Films with Fluoro-Organic Functionalization

MEL-type Pure-Silica Zeolite Nanocrystals Prepared by an Evaporation-Assisted Two-Stage Synthesis Method as Ultra-Low-k Materials†

Pure-silica zeolite thin films by vapor phase transport of fluoride for low-k applications