Polymer-based composites were heralded in the 1960s as a new paradigm for materials. By dispersing strong, highly stiff fibres in a polymer matrix, high-performance lightweight composites could be developed and tailored to individual applications. Today we stand at a similar threshold in the realm of polymer nanocomposites with the promise of strong, durable, multifunctional materials with low nanofiller content. However, the cost of nanoparticles, their availability and the challenges that remain to achieve good dispersion pose significant obstacles to these goals. Here, we report the creation of polymer nanocomposites with functionalized graphene sheets, which overcome these obstacles and provide superb polymer-particle interactions. An unprecedented shift in glass transition temperature of over 40 degrees C is obtained for poly(acrylonitrile) at 1 wt% functionalized graphene sheet, and with only 0.05 wt% functionalized graphene sheet in poly(methyl methacrylate) there is an improvement of nearly 30 degrees C. Modulus, ultimate strength and thermal stability follow a similar trend, with values for functionalized graphene sheet- poly(methyl methacrylate) rivaling those for single-walled carbon nanotube-poly(methyl methacrylate) composites.

/pdf/functionalized-graphene-sheets-for-polymer-nanocomposites-504wftsrhc.pdf

Functionalized graphene sheets for polymer nanocomposites

We review the present state of polymer nanocomposites research in which the fillers are single-wall or multiwall carbon nanotubes. By way of background we provide a brief synopsis about carbon nanotube materials and their suspensions. We summarize and critique various nanotube/polymer composite fabrication methods including solution mixing, melt mixing, and in situ polymerization with a particular emphasis on evaluating the dispersion state of the nanotubes. We discuss mechanical, electrical, rheological, thermal, and flammability properties separately and how these physical properties depend on the size, aspect ratio, loading, dispersion state, and alignment of nanotubes within polymer nanocomposites. Finally, we summarize the current challenges to and opportunities for efficiently translating the extraordinary properties of carbon nanotubes to polymer matrices in hopes of facilitating progress in this emerging area.

Polymer Nanocomposites Containing Carbon Nanotubes

Graphene has emerged as a subject of enormous scientific interest due to its exceptional electron transport, mechanical properties, and high surface area. When incorporated appropriately, these atomically thin carbon sheets can significantly improve physical properties of host polymers at extremely small loading. We first review production routes to exfoliated graphite with an emphasis on top-down strategies starting from graphite oxide, including advantages and disadvantages of each method. Then solvent- and melt-based strategies to disperse chemically or thermally reduced graphene oxide in polymers are discussed. Analytical techniques for characterizing particle dimensions, surface characteristics, and dispersion in matrix polymers are also introduced. We summarize electrical, thermal, mechanical, and gas barrier properties of the graphene/polymer nanocomposites. We conclude this review listing current challenges associated with processing and scalability of graphene composites and future perspectives f...

/pdf/graphene-polymer-nanocomposites-19884oy559.pdf

Graphene/Polymer Nanocomposites

https://cyberleninka.org/article/n/1018032.pdf

Polymer nanotechnology: Nanocomposites

Carbon nanotubes (CNTs) hold the promise of delivering exceptional mechanical properties and multi-functional characteristics. Ever-increasing interest in applying CNTs in many different fields has led to continued efforts to develop dispersion and functionalization techniques. To employ CNTs as effective reinforcement in polymer nanocomposites, proper dispersion and appropriate interfacial adhesion between the CNTs and polymer matrix have to be guaranteed. This paper reviews the current understanding of CNTs and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT dispersion and functionalization on the properties of CNT/polymer nanocomposites. The fabrication techniques and potential applications of CNT/polymer nanocomposites are also highlighted.

Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review

https://repository.upenn.edu/cgi/viewcontent.cgi?article=1113&context=mse_papers

Increased flexural modulus and strength in SWNT/epoxy composites by a new fabrication method

We have prepared nylon 6,10 nanocomposites using functionalized single wall carbon nanotubes and our interfacial in situ polycondensation method. The specific functional groups -(CH2)nCOCl [n = 4 and 9] on the sidewalls of SWNT were designed to covalently link nanotubes to the nylon matrix via alkyl segments. The composites with functionalized SWNT show significant improvements in tensile modulus, strength, and toughness relative to nylon and nylon modified with non-functionalized SWNT. The alkyl linkages at the SWNT/nylon 6,10 interface contribute significantly to improving the toughness of the composites.

Tuning the Mechanical Properties of SWNT/Nylon 6,10 Composites with Flexible Spacers at the Interface

Improved mechanical strength and electrical conductivity of organogels containing carbon nanotubes

A novel B-doped ZnO/TiO2 (B–ZnO/TiO2) nanocomposite photocatalyst was prepared using a mechanochemical–calcination method. For the characterization of the synthesized B–ZnO/TiO2 photocatalyst, XRD, FESEM-EDS, FTIR, UV-Vis DRS, BET, PL, and XPS techniques were used. The bandgap energy of B–ZnO/TiO2 was reduced, resulting in enhanced visible-light absorption. Significant PL quenching confirmed the reduction in the electron–hole recombination rate. Furthermore, reduced crystallite size and a larger surface area were obtained. Hence, the B–ZnO/TiO2 photocatalyst exhibited better photocatalytic activity than commercial TiO2, ZnO, B–ZnO, and ZnO/TiO2 in the removal of methylene blue (MB) dye under natural sunlight irradiation. The effects of various parameters, such as initial concentration, photocatalyst amount, solution pH, and irradiation time, were studied. Under optimal conditions (MB concentration of 15 mg/L, pH 11, B–ZnO/TiO2 amount of 30 mg, and 15 min of operation), a maximum MB removal efficiency of ~95% was obtained. A plausible photocatalytic degradation mechanism of MB with B–ZnO/TiO2 was estimated from the scavenger test, and it was observed that the •O2− and •OH radicals were potential active species for the MB degradation. Cyclic experiments indicated the high stability and reusability of B–ZnO/TiO2, which confirmed that it can be an economical and environmentally friendly photocatalyst.

/pdf/natural-sunlight-driven-photocatalytic-removal-of-toxic-2rpvu6wd.pdf

Mohammad Moniruzzaman

Papers

Polymer Nanocomposites Containing Carbon Nanotubes

Increased flexural modulus and strength in SWNT/epoxy composites by a new fabrication method

Tuning the Mechanical Properties of SWNT/Nylon 6,10 Composites with Flexible Spacers at the Interface

Improved mechanical strength and electrical conductivity of organogels containing carbon nanotubes

Natural Sunlight Driven Photocatalytic Removal of Toxic Textile Dyes in Water Using B-Doped ZnO/TiO2 Nanocomposites