http://repository.ust.hk/ir/bitstream/1783.1-645/1/323k.pdf

A comparison of chemisorption kinetic models applied to pollutant removal on various sorbents

In this review, the progress made in the last ten years concerning the synthesis of porous carbon materials is summarized. Porous carbon materials with various pore sizes and pore structures have been synthesized using several different routes. Microporous activated carbons have been synthesized through the activation process. Ordered microporous carbon materials have been synthesized using zeolites as templates. Mesoporous carbons with a disordered pore structure have been synthesized using various methods, including catalytic activation using metal species, carbonization of polymer/polymer blends, carbonization of organic aerogels, and template synthesis using silica nanoparticles. Ordered mesoporous carbons with various pore structures have been synthesized using mesoporous silica materials such as MCM-48, HMS, SBA-15, MCF, and MSU-X as templates. Ordered mesoporous carbons with graphitic pore walls have been synthesized using soft-carbon sources that can be converted to highly ordered graphite at high temperature. Hierarchically ordered mesoporous carbon materials have been synthesized using various designed silica templates. Some of these mesoporous carbon materials have successfully been used as adsorbents for bulky pollutants, as electrodes for supercapacitors and fuel cells, and as hosts for enzyme immobilization. Ordered macroporous carbon materials have been synthesized using colloidal crystals as templates. One-dimensional carbon nanostructured materials have been fabricated using anodic aluminum oxide (AAO) as a template.

Recent Progress in the Synthesis of Porous Carbon Materials

In the present review, aerogels designate dried gels with a very high relative pore volume. These are versatile materials that are synthesized in a first step by low-temperature traditional sol-gel chemistry. However, while in the final step most wet gels are often dried by evaporation to produce so-called xerogels, aerogels are dried by other techniques, essentially supercritical drying. As a result, the dry samples keep the very unusual porous texture which they had in the wet stage. In general these dry solids have very low apparent densities, large specific surface areas, and in most cases they exhibit amorphous structures when examined by X-ray diffraction (XRD) methods. In addition, they are metastable from the point of view of their thermodynamic properties. Consequently, they often undertake a structural evolution by chemical transformation, when aged in a liquid medium and/or heat treated. As aerogels combine the properties of being highly divided solids with their metastable character, they can develop very attractive physical and chemical properties not achievable by other means of low temperature soft chemical synthesis. In other words, they form a new class of solids showing sophisticated potentialities for a range of applications. These applications as well as chemical and physical aspects of these materials were regularly detailed and discussed in a series of symposia on aerogels,1-5 the last of them being held in Albuquerque in 2000.6 Reviews were also regularly published, either on both xerogels and aerogels7 or more focused on the applications of aerogels.8-13 The particularly interesting properties of aerogels arise from the extraordinary flexibility of the solgel processing, coupled with original drying techniques. The wet chemistry is not basically different for making xerogels and aerogels. As this common basis has been extensively detailed in recent books,14 it does not need to be reviewed. Compared to traditional xerogels, the originality of aerogels comes from * To whom all correspondence should be addressed. † Institut de Recherches sur la Catalyse. ‡ Laboratoire d’Application de la Chimie à l’Environnement. 4243 Chem. Rev. 2002, 102, 4243−4265

https://is.muni.cz/el/1431/podzim2006/C7780/um/Read/2711172/aerogel_Pajonk_ChRev02_4243.pdf

Chemistry of Aerogels and Their Applications

A study is conducted to demonstrate catalytic dehydrogenation of light alkanes on metals and metal oxides. The study provides a complete overview of the materials used to catalyze this reaction, as dehydrogenation for the production of light olefins has become extremely relevant. Relevant factors, such as the specific nature of the active sites, as well as the effect of support, promoters, and reaction feed on catalyst performance and lifetime, are discussed for each catalytic Material. The study compares different catalysts in terms of the reaction mechanism and deactivation pathways and catalytic performance. The duration of the dehydrogenation step depends on the heat content of the catalyst bed, which decreases rapidly due to the endothermic nature of the reaction. Part of the heat required for the reaction is introduced to the reactors by preheating the reaction feed, additional heat being provided by adjacent reactors that are regenerating the coked catalysts.

Catalytic dehydrogenation of light alkanes on metals and metal oxides.

Adsorption of organic molecules from aqueous solutions on carbon materials

Porous structure of organic and carbon aerogels synthesized by sol-gel polycondensation of resorcinol with formaldehyde

Control of mesoporous structure of organic and carbon aerogels

Drying of coated film of polyvinylalcohol (PVA) aqueous solution is studied theoretically and experimentally, focusing on the diffusion process of water and the volumetric shrinkage of film occurring by evaporation of water The diffusion coefficients were measured over the whole range of concentration by three methods, and drying experiments of coated films using hot air were performed Numerical solutions were obtained from a set of transport equations for water using the observed diffusion coefficients and were compared with the experimental results

/pdf/drying-mechanism-of-coated-film-of-polymer-solution-4249x3sqmq.pdf

Drying mechanism of coated film of polymer solution

Silica alcogels were synthesized by the sol-gel polymerization of tetraethylorthosilicate (TEOS). In the synthesis, HCl and NH3 were used as hydrolysis and condensation catalysts. The gelation time became short and the visible light transmittance increased with increasing the amount of HCl or lengthening the hydrolysis time. The alcogels were dried under supercritical conditions with carbon dioxide, and silica aerogels were obtained. As a result of characterization by visible light transmission and N2 adsorption, the aerogels are mesoporous materials with high surface areas. The experimental results suggest that the aerogel properties are not influenced by the drying conditions such as extraction temperature, extraction time, depressurizing temperature, and depressurizing rate. On the other hand, the properties are changed under the conditions of sol-gel polymerization. In the preparation of highly transparent aerogels with high surface areas and large pore volumes, it is necessary to synthesize highly transparent alcogels. It is found that the visible light transmittance of alcogels is an index for preparing aerogels from TEOS. Copyright 1998 Academic Press. Copyright 1998Academic Press

Preparation of Silica Aerogel from TEOS

The mechanism of surface flow of adsorbing gas molecules through the porous adsorbent is interpreted, and a new hopping model is derived by separately taking into account the hopping behaviors of monolayer and multilayer molecules. The reported experimental results containing the data measured here are correlated well. Finally, some considerations are given to the two experimental constants appearing in the model.

Morio Okazaki

Papers

Porous structure of organic and carbon aerogels synthesized by sol-gel polycondensation of resorcinol with formaldehyde

Control of mesoporous structure of organic and carbon aerogels

Drying mechanism of coated film of polymer solution

Preparation of Silica Aerogel from TEOS

Interpretation of surface flow phenomenon of adsorbed gases by hopping model