Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

/pdf/self-assembled-monolayers-of-thiolates-on-metals-as-a-form-1neb0hj3k4.pdf

Self-assembled monolayers of thiolates on metals as a form of nanotechnology.

A second-generation potential energy function for solid carbon and hydrocarbon molecules that is based on an empirical bond order formalism is presented. This potential allows for covalent bond breaking and forming with associated changes in atomic hybridization within a classical potential, producing a powerful method for modelling complex chemistry in large many-atom systems. This revised potential contains improved analytic functions and an extended database relative to an earlier version (Brenner D W 1990 Phys. Rev. B 42 9458). These lead to a significantly better description of bond energies, lengths, and force constants for hydrocarbon molecules, as well as elastic properties, interstitial defect energies, and surface energies for diamond.

/pdf/a-second-generation-reactive-empirical-bond-order-rebo-3nq9vxvup4.pdf

A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons

A new method of desorption ionization is described and applied to the ionization of various compounds, including peptides and proteins present on metal, polymer, and mineral surfaces. Desorption electrospray ionization (DESI) is carried out by directing electrosprayed charged droplets and ions of solvent onto the surface to be analyzed. The impact of the charged particles on the surface produces gaseous ions of material originally present on the surface. The resulting mass spectra are similar to normal ESI mass spectra in that they show mainly singly or multiply charged molecular ions of the analytes. The DESI phenomenon was observed both in the case of conductive and insulator surfaces and for compounds ranging from nonpolar small molecules such as lycopene, the alkaloid coniceine, and small drugs, through polar compounds such as peptides and proteins. Changes in the solution that is sprayed can be used to selectively ionize particular compounds, including those in biological matrices. In vivo analysis is demonstrated.

https://science.sciencemag.org/content/sci/306/5695/471.full.pdf

Mass Spectrometry Sampling Under Ambient Conditions with Desorption Electrospray Ionization

3.6.1. Polishing and Cleaning 2663 3.6.2. Vacuum and Heat Treatments 2664 3.6.3. Carbon Electrode Activation 2665 3.7. Summary and Generalizations 2666 4. Advanced Carbon Electrode Materials 2666 4.1. Microfabricated Carbon Thin Films 2666 4.2. Boron-Doped Diamond for Electrochemistry 2668 4.3. Fibers and Nanotubes 2669 4.4. Carbon Composite Electrodes 2674 5. Carbon Surface Modification 2675 5.1. Diazonium Ion Reduction 2675 5.2. Thermal and Photochemical Modifications 2679 5.3. Amine and Carboxylate Oxidation 2680 5.4. Modification by “Click” Chemistry 2681 6. Synopsis and Outlook 2681 7. Acknowledgments 2682 8. References 2682

/pdf/advanced-carbon-electrode-materials-for-molecular-2y6b22van0.pdf

Advanced carbon electrode materials for molecular electrochemistry.

Spectroelectrochemical measurements of second-order catalytic reaction rates using signal averaging

Coarse-grained molecular dynamics studies of cluster-bombarded benzene crystals

To better understand the influence of cholesterol (CH) on dipalmitoylphosphatidylethanolamine (DPPE), Langmuir-Blodgett (LB) model membranes of DPPE with varying amounts of cholesterol were imaged by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and atomic force microscopy (AFM). Cholesterol has a condensing effect on DPPE that at low cholesterol concentrations results in lateral heterogeneity of the LB monolayer. At 4:1 DPPE/CH, islands of DPPE/CH phase exist with a connected DPPE phase. As the concentration of cholesterol is increased, the percolation threshold is crossed and the DPPE/CH phase islands connect to separate the DPPE phase (2:1 DPPE/CH). Finally, at 50 mol % cholesterol a single homogeneous DPPE/CH phase LB monolayer exists. ToF-SIMS of the DPPE/CH phase provides a lower ion signal for the characteristic lipid fragments and substrate apparently owing to the higher molecular density induced by cholesterol. AFM data indicate that the DPPE/CH phase is lower in height than the DPPE phase. As phosphatidylethanolamine is predominant in the inner lipid leaflet of cellular membranes, this work has implications for the understanding of cholesterol domains in the inner leaflet of cells.

Lateral heterogeneity of dipalmitoylphosphatidylethanolamine-cholesterol Langmuir-Blodgett films investigated with imaging time-of-flight secondary ion mass spectrometry and atomic force microscopy.

Time-of-flight secondary ion mass spectrometry is utilized to characterize the response of Langmuir−Blodgett (LB) multilayers under the bombardment by buckminsterfullerene primary ions. The LB multilayers are formed by barium arachidate and barium dimyristoyl phosphatidate on a Si substrate. The unique sputtering properties of the C60 ion beam result in successful molecular depth profiling of both the single component and multilayers of alternating chemical composition. At cryogenic (liquid nitrogen) temperatures, the high mass signals of both molecules remain stable under sputtering, while at room temperature, they gradually decrease with primary ion dose. The low temperature also leads to a higher average sputter yield of molecules. Depth resolution varies from 20 to 50 nm and can be reduced further by lowering the primary ion energy or by using glancing angles of incidence of the primary ion beam.

Depth resolution during C60+ profiling of multilayer molecular films.

The early stages of C60 bombardment of octane and octatetraene crystals are modeled using molecular dynamics simulations with incident energies of 5−20 keV. Using the AIREBO potential, which allows for chemical reactions in hydrocarbon molecules, we are able to investigate how the projectile energy is partitioned into changes in potential and kinetic energy as well as how much energy flows into reacted molecules and internal energy. Several animations have been included to illustrate the bombardment process. The results show that the material near the edge of the crater can be ejected with low internal energies and that ejected molecules maintain their internal energies in the plume, in contrast to a collisional cooling mechanism previously proposed. In addition, a single C60 bombardment was able to create many free and reacted H atoms which may aid in the ionization of molecules upon subsequent bombardment events.

Nicholas Winograd

Papers

Spectroelectrochemical measurements of second-order catalytic reaction rates using signal averaging

Coarse-grained molecular dynamics studies of cluster-bombarded benzene crystals

Lateral heterogeneity of dipalmitoylphosphatidylethanolamine-cholesterol Langmuir-Blodgett films investigated with imaging time-of-flight secondary ion mass spectrometry and atomic force microscopy.

Depth resolution during C60+ profiling of multilayer molecular films.

Internal Energy of Molecules Ejected Due to Energetic C60 Bombardment