The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

http://ieeexplore.ieee.org/iel5/6354/16969/00781867.pdf

Photonic crystals

Electromagnetic Metamaterials: Transmission Line Theory and Microwave Applications. By Christophe Caloz and Tatsuo Itoh.

Space-Time Block Coding for Wireless Communications

In general, Micropower Impulse Radar (MIR) depends on Ultra-Wideband (UWB) transmission systems. UWB technology can supply innovative new systems and products that have an obvious value for radar and communications uses. Important applications include bridge-deck inspection systems, ground penetrating radar, mine detection, and precise distance resolution for such things as liquid level measurement. Most of these UWB inspection and measurement methods have some unique qualities, which need to be pursued. Therefore, in considering changes to Part 15 the FCC needs to take into account the unique features of UWB technology. MIR is applicable to two general types of UWB systems: radar systems and communications systems. Currently LLNL and its licensees are focusing on radar or radar type systems. LLNL is evaluating MIR for specialized communication systems. MIR is a relatively low power technology. Therefore, MIR systems seem to have a low potential for causing harmful interference to other users of the spectrum since the transmitted signal is spread over a wide bandwidth, which results in a relatively low spectral power density.

/pdf/response-to-fcc-98-208-notice-of-inquiry-in-the-matter-of-3attixctl7.pdf

Response to FCC 98-208 notice of inquiry in the matter of revision of part 15 of the commission's rules regarding ultra-wideband transmission systems

We present a flexible, compact antenna system intended for telemedicine applications. The design is based on an M-shaped printed monopole antenna operating in the Industrial, Scientific, and Medical (ISM) 2.45 GHz band integrated with a miniaturized slotted Jerusalem Cross (JC) Artificial Magnetic Conductor (AMC) ground plane. The AMC ground plane is utilized to isolate the user's body from undesired electromagnetic radiation in addition to minimizing the antenna's impedance mismatch caused by the proximity to human tissues. Specific Absorption Rate (SAR) is analyzed using a numerical human body model (HUGO) to assess the feasibility of the proposed design. The antenna expresses 18% impedance bandwidth; moreover, the inclusion of the AMC ground plane increases the front to back ratio by 8 dB, provides 3.7 dB increase in gain, in addition to 64% reduction in SAR. Experimental and numerical results show that the radiation characteristics, impedance matching, and SAR values of the proposed design are significantly improved compared to conventional monopole and dipole antennas. Furthermore, it offers a compact and flexible solution which makes it a good candidate for the wearable telemedicine application.

Flexible and Compact AMC Based Antenna for Telemedicine Applications

A compact microstrip line-fed ultrawideband (UWB) tapered-shape slot antenna is presented. The proposed antenna comprises a tapered-shape slot and rectangular tuning stub. The antenna is fabricated onto an inexpensive FR4 substrate with an overall dimension of 22 × 24 mm2. The experiment shows that the proposed antenna achieves good impedance matching constant gain, stable radiation patterns over an operating bandwidth of 3-11.2 GHz (115.5%) that covers the entire UWB. The nearly stable radiation pattern with a maximum gain of 5.4 dBi makes the proposed antenna suitable for being used in UWB communication applications.

Compact Tapered-Shape Slot Antenna for UWB Applications

Coplanar Waveguide fed microstrip patch antenna

A broadband inverted E-H shaped microstrip patch antenna is proposed and experimentally investigated. The antenna employs novel E-H shaped patch with L-probe feed technique. Prototype of the proposed antenna has been fabricated and measured for electromagnetic analysis including the impedance bandwidth, radiation pattern, and antenna gain. The designed antenna has a dimension of 80mm by 50mm, leading to broad bandwidths covering 1.76GHz to 2.38GHz. Stable radiation patterns across the operating bandwidth are observed. In addition, a parametric study is conducted to facilitate the design and optimization process.

/pdf/broadband-e-h-shaped-microstrip-patch-antenna-for-wireless-33mt1iovbo.pdf

Broadband E-h Shaped Microstrip Patch Antenna for Wireless Systems

A compact wideband dual-frequency microstrip antenna is proposed in this paper. By employing an ofiset microstrip-fed line and a strip close to the radiating edges in the circular slot patch, an antenna operating at dual frequency with the impedance bandwidth of 26.2% and 22.2% respectively is presented. By attaching a strip to the radiating edges opposite to the microstrip-fed line, this alters the current distribution and radiation on the antenna at the second resonant frequency. The second frequency is also tunable by varying the lengths of the microstrip-fed line. It is demonstrated that the proposed antenna covers the widebands of UHF and microwave for RFID application. A good agreement is obtained between the simulated and experimental results.

/pdf/circular-microstrip-slot-antenna-for-dual-frequency-rfid-4cjga0mrdf.pdf

Circular microstrip slot antenna for dual- frequency rfid application

Traditional waste management system operates based on daily schedule which is highly inefficient and costly. The existing recycle bin has also proved its ineffectiveness in the public as people do not recycle their waste properly. With the development of Internet of Things (IoT) and Artificial Intelligence (AI), the traditional waste management system can be replaced with smart sensors embedded into the system to perform real time monitoring and allow for better waste management. The aim of this research is to develop a smart waste management system using LoRa communication protocol and TensorFlow based deep learning model. LoRa sends the sensor data and Tensorflow performs real time object detection and classification. The bin consists of several compartments to segregate the waste including metal, plastic, paper, and general waste compartment which are controlled by the servo motors. Object detection and waste classification is done in TensorFlow framework with pre-trained object detection model. This object detection model is trained with images of waste to generate a frozen inference graph used for object detection which is done through a camera connected to the Raspberry Pi 3 Model B+ as the main processing unit. Ultrasonic sensor is embedded into each waste compartment to monitor the filling level of the waste. GPS module is integrated to monitor the location and real time of the bin. LoRa communication protocol is used to transmit data about the location, real time and filling level of the bin. RFID module is embedded for the purpose of waste management personnel identification.

/pdf/an-internet-of-things-based-smart-waste-management-system-1as4bt8e4j.pdf

Norbahiah Misran

Papers

Compact Tapered-Shape Slot Antenna for UWB Applications

Coplanar Waveguide fed microstrip patch antenna

Broadband E-h Shaped Microstrip Patch Antenna for Wireless Systems

Circular microstrip slot antenna for dual- frequency rfid application

An Internet of Things Based Smart Waste Management System Using LoRa and Tensorflow Deep Learning Model