Multilevel inverter technology has emerged recently as a very important alternative in the area of high-power medium-voltage energy control. This paper presents the most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-clamped (flying capacitor), and cascaded multicell with separate DC sources. Emerging topologies like asymmetric hybrid cells and soft-switched multilevel inverters are also discussed. This paper also presents the most relevant control and modulation methods developed for this family of converters: multilevel sinusoidal pulsewidth modulation, multilevel selective harmonic elimination, and space-vector modulation. Special attention is dedicated to the latest and more relevant applications of these converters such as laminators, conveyor belts, and unified power-flow controllers. The need of an active front end at the input side for those inverters supplying regenerative loads is also discussed, and the circuit topology options are also presented. Finally, the peripherally developing areas such as high-voltage high-power devices and optical sensors and other opportunities for future development are addressed.

Multilevel inverters: a survey of topologies, controls, and applications

Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

/pdf/recent-advances-and-industrial-applications-of-multilevel-26fluutoc9.pdf

Recent Advances and Industrial Applications of Multilevel Converters

This paper presents a technology review of voltage-source-converter topologies for industrial medium-voltage drives. In this highly active area, different converter topologies and circuits have found their application in the market. This paper covers the high-power voltage-source inverter and the most used multilevel-inverter topologies, including the neutral-point-clamped, cascaded H-bridge, and flying-capacitor converters. This paper presents the operating principle of each topology and a review of the most relevant modulation methods, focused mainly on those used by industry. In addition, the latest advances and future trends of the technology are discussed. It is concluded that the topology and modulation-method selection are closely related to each particular application, leaving a space on the market for all the different solutions, depending on their unique features and limitations like power or voltage level, dynamic performance, reliability, costs, and other technical specifications.

Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives

Cascaded multilevel inverters synthesize a medium-voltage output based on a series connection of power cells which use standard low-voltage component configurations. This characteristic allows one to achieve high-quality output voltages and input currents and also outstanding availability due to their intrinsic component redundancy. Due to these features, the cascaded multilevel inverter has been recognized as an important alternative in the medium-voltage inverter market. This paper presents a survey of different topologies, control strategies and modulation techniques used by these inverters. Regenerative and advanced topologies are also discussed. Applications where the mentioned features play a key role are shown. Finally, future developments are addressed.

A Survey on Cascaded Multilevel Inverters

This work is devoted to review and analyze the most relevant characteristics of multilevel converters, to motivate possible solutions, and to show that we are in a decisive instant in which energy companies have to bet on these converters as a good solution compared with classic two-level converters. This article presents a brief overview of the actual applications of multilevel converters and provides an introduction of the modeling techniques and the most common modulation strategies. It also addresses the operational and technological issues.

/pdf/the-age-of-multilevel-converters-arrives-izieu77jn6.pdf

The age of multilevel converters arrives

This paper presents a predictive current control method and its application to a voltage source inverter. The method uses a discrete-time model of the system to predict the future value of the load current for all possible voltage vectors generated by the inverter. The voltage vector which minimizes a quality function is selected. The quality function used in this work evaluates the current error at the next sampling time. The performance of the proposed predictive control method is compared with hysteresis and pulsewidth modulation control. The results show that the predictive method controls very effectively the load current and performs very well compared with the classical solutions

Predictive Current Control of a Voltage Source Inverter

New regulations impose more stringent limits on current harmonics injected by power converters that are achieved with pulsewidth-modulated (PWM) rectifiers. In addition, several applications demand the capability of power regeneration to the power supply. This work presents the state of the art in the field of regenerative rectifiers with reduced input harmonics and improved power factor. Regenerative rectifiers are able to deliver energy back from the dc side to the ac power supply. Topologies for single- and three-phase power supplies are considered with their corresponding control strategies. Special attention is given to the application of voltage- and current-source PWM rectifiers in different processes with a power range from a few kilowatts up to several megawatts. This paper shows that PWM regenerative rectifiers are a highly developed and mature technology with a wide industrial acceptance.

http://www.lcda.cl/descargas/rodriguez_dixon_pont_espinoza_lezana05.pdf

PWM regenerative rectifiers: state of the art

This paper is related to faults that can appear in multilevel (ML) inverters, which have a high number of components. This is a subject of increasing importance in high-power inverters. First, methods to identify a fault are classified and briefly described for each topology. In addition, a number of strategies and hardware modifications that allow for operation in faulty conditions are also presented. As a result of the analyzed works, it can be concluded that ML inverters can significantly increase their availability and are able to operate even with some faulty components.

/pdf/survey-on-fault-operation-on-multilevel-inverters-1lv2auia1i.pdf

Survey on Fault Operation on Multilevel Inverters

This paper presents a method for operating cascaded multilevel inverters when one or more power cells are damaged. The method is based on the use of additional switches in the power circuit to bypass the faulty cell. To control the cells, the angle of phase shifting in the carrier signals is modified according to the number of operating cells, to minimize the load voltage distortion, when the inverter operates in failure mode. The reference signals of the pulsewidth-modulation modulators are also modified to increase the output voltage. Simulation and experimental results show the effectiveness of this method, which significantly increases the reliability of the drive.

Operation of a medium-voltage drive under faulty conditions

Multilevel converters and, in particular, flying capacitor (FC) converters are an attractive alternative for medium-voltage applications. FC converters do not need complex transformers to obtain the DC-link voltage and also present good robustness properties, when operating under internal fault conditions. Unfortunately, with standard modulation strategies, to increase the number of output voltage levels of FC converters, it is necessary to increase the number of cells and, hence, the number of capacitors and switches. In this paper, we develop a finite-state model predictive control strategy for FC converters. Our method controls output currents and voltages and also the FC voltage ratios. This allows one to increase the number of output voltage levels, even at high power factor load conditions and without having to increase the number of capacitors and switches. Experimental results illustrate that the proposed algorithm is capable of achieving good performance, despite possible parameter mismatch.

/pdf/model-predictive-control-of-an-asymmetric-flying-capacitor-4t3aik6aek.pdf

Pablo Lezana

Papers

Predictive Current Control of a Voltage Source Inverter

PWM regenerative rectifiers: state of the art

Survey on Fault Operation on Multilevel Inverters

Operation of a medium-voltage drive under faulty conditions

Model Predictive Control of an Asymmetric Flying Capacitor Converter