The Atmospheric Imaging Assembly (AIA) provides multiple simultaneous high-resolution full-disk images of the corona and transition region up to 0.5 R ⊙ above the solar limb with 1.5-arcsec spatial resolution and 12-second temporal resolution. The AIA consists of four telescopes that employ normal-incidence, multilayer-coated optics to provide narrow-band imaging of seven extreme ultraviolet (EUV) band passes centered on specific lines: Fe xviii (94 A), Fe viii, xxi (131 A), Fe ix (171 A), Fe xii, xxiv (193 A), Fe xiv (211 A), He ii (304 A), and Fe xvi (335 A). One telescope observes C iv (near 1600 A) and the nearby continuum (1700 A) and has a filter that observes in the visible to enable coalignment with images from other telescopes. The temperature diagnostics of the EUV emissions cover the range from 6×104 K to 2×107 K. The AIA was launched as a part of NASA’s Solar Dynamics Observatory (SDO) mission on 11 February 2010. AIA will advance our understanding of the mechanisms of solar variability and of how the Sun’s energy is stored and released into the heliosphere and geospace.

/pdf/the-atmospheric-imaging-assembly-aia-on-the-solar-dynamics-22pv2dupqt.pdf

The Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO)

The Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) is a five telescope package, which has been developed for the Solar Terrestrial Relation Observatory (STEREO) mission by the Naval Research Laboratory (USA), the Lockheed Solar and Astrophysics Laboratory (USA), the Goddard Space Flight Center (USA), the University of Birmingham (UK), the Rutherford Appleton Laboratory (UK), the Max Planck Institute for Solar System Research (Germany), the Centre Spatiale de Leige (Belgium), the Institut d’Optique (France) and the Institut d’Astrophysique Spatiale (France). SECCHI comprises five telescopes, which together image the solar corona from the solar disk to beyond 1 AU. These telescopes are: an extreme ultraviolet imager (EUVI: 1–1.7 R⊙), two traditional Lyot coronagraphs (COR1: 1.5–4 R⊙ and COR2: 2.5–15 R⊙) and two new designs of heliospheric imagers (HI-1: 15–84 R⊙ and HI-2: 66–318 R⊙). All the instruments use 2048×2048 pixel CCD arrays in a backside-in mode. The EUVI backside surface has been specially processed for EUV sensitivity, while the others have an anti-reflection coating applied. A multi-tasking operating system, running on a PowerPC CPU, receives commands from the spacecraft, controls the instrument operations, acquires the images and compresses them for downlink through the main science channel (at compression factors typically up to 20×) and also through a low bandwidth channel to be used for space weather forecasting (at compression factors up to 200×). An image compression factor of about 10× enable the collection of images at the rate of about one every 2–3 minutes. Identical instruments, except for different sizes of occulters, are included on the STEREO-A and STEREO-B spacecraft.

/pdf/sun-earth-connection-coronal-and-heliospheric-investigation-pv6gdh9aap.pdf

Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI)

The Solar Optical Telescope (SOT) aboard the Hinode satellite (formerly called Solar-B) consists of the Optical Telescope Assembly (OTA) and the Focal Plane Package (FPP). The OTA is a 50-cm diffraction-limited Gregorian telescope, and the FPP includes the narrowband filtergraph (NFI) and the broadband filtergraph (BFI), plus the Stokes Spectro-Polarimeter (SP). The SOT provides unprecedented high-resolution photometric and vector magnetic images of the photosphere and chromosphere with a very stable point spread function and is equipped with an image-stabilization system with performance better than 0.01 arcsec rms. Together with the other two instruments on Hinode (the X-Ray Telescope (XRT) and the EUV Imaging Spectrometer (EIS)), the SOT is poised to address many fundamental questions about solar magnetohydrodynamics. This paper provides an overview; the details of the instrument are presented in a series of companion papers.

https://opensky.ucar.edu/islandora/object/articles%3A6218/datastream/PDF/view

The Solar Optical Telescope for the Hinode Mission: An Overview

The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33 – 0.4 arcsec spatial resolution, two-second temporal resolution, and 1 km s−1 velocity resolution over a field-of-view of up to 175 arcsec × 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332 – 1358 A, 1389 – 1407 A, and 2783 – 2834 A, including bright spectral lines formed in the chromosphere (Mg ii h 2803 A and Mg ii k 2796 A) and transition region (C ii 1334/1335 A and Si iv 1394/1403 A). Slit-jaw images in four different passbands (C ii 1330, Si iv 1400, Mg ii k 2796, and Mg ii wing 2830 A) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec × 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative–MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.

/pdf/the-interface-region-imaging-spectrograph-iris-52t0ocd17t.pdf

The Interface Region Imaging Spectrograph (IRIS)

This contract is for the development and flight of an experiment to study the solar atmosphere with excellent spatial and temporal resolution; and reduction and analysis of the resultant data. After being launched into a near perfect orbit on 2 April 1998, the spacecraft and instrument remain in good condition and the resultant data are spectacular. Over 6.6 million images have now been taken. Observing highlights this month included several coordinations with CDS, studies of the quiet Sun with SUMER and NMI, coordinations with observers at the SPO Dunn Tower Telescope, and a variety of active region observations. Some of the latter were relatively unique in that they emphasized using the hottest (284A) channel of TRACE. We were informed of the results of the Senior Review Committee's evaluation of all Space Science on-orbit missions and the corresponding fiscal year budgets for TRACE. The budget for FY-02 is modestly less than is being spent in FY-01 and for the years beyond that it is much, much lower.

/pdf/the-transition-region-and-coronal-explorer-37ypyipw1d.pdf

The transition region and coronal explorer

The Transition Region and Coronal Explorer (TRACE) – described in the companion paper by Handy et al. (1999) – provides an unprecedented view of the solar outer atmosphere. In this overview, we discuss the initial impressions gained from, and interpretations of, the first million images taken with TRACE. We address, among other topics, the fine structure of the corona, the larger-scale thermal trends, the evolution of the corona over quiet and active regions, the high incidence of chromospheric material dynamically embedded in the coronal environment, the dynamics and structure of the conductively dominated transition region between chromosphere and corona, loop oscillations and flows, and sunspot coronal loops. With TRACE we observe a corona that is extremely dynamic and full of flows and wave phenomena, in which loops evolve rapidly in temperature, with associated changes in density. This dynamic nature points to a high degree of spatio-temporal variability even under conditions that traditionally have been referred to as quiescent. This variability requires that coronal heating can turn on and off on a time scale of minutes or less along field-line bundles with cross sections at or below the instrumental resolution of 700 km. Loops seen at 171 A (∼1 MK) appear to meander through the coronal volume, but it is unclear whether this is caused by the evolution of the field or by the weaving of the heating through the coronal volume, shifting around for periods of up to a few tens of minutes and lighting up subsequent field lines. We discuss evidence that the heating occurs predominantly within the first 10 to 20 Mm from the loop footpoints. This causes the inner parts of active-region coronae to have a higher average temperature than the outer domains.

A new view of the solar outer atmosphere by the transition region and Coronal Explorer

On 1998 July 14, a class M3 flare occurred at 12:55 UT in AR 8270 near disk center. Kitt Peak line-of-sight magnetograms show that the flare occurred in a δ spot. Mees vector magnetograms show a strong shear localized near a portion of the closed neutral line around the parasitic polarity of the δ spot. Observations of the flare in 171, 195, and 1600 A have been obtained by TRACE, with 40 s temporal and 05 spatial resolutions. They reveal that small-scale preflare loops above the sheared region expanded and disappeared for more than 1 hr before flare maximum. During the flare, bright loops anchored in bright ribbons form and grow. This occurs while large-scale dimmings, associated with large expanding loops, develop on both sides of the active region. This suggests that the flare was eruptive and was accompanied by a coronal mass ejection (CME). Magnetic field extrapolations reveal the presence of a null point in the corona, with its associated "spine" field line, and its "fan" surface surrounding the parasitic polarity. We show that while the whole event occurs, the intersections of the "fan" and the "spine" with the photosphere brighten and move continuously. The interpretation of the event shows that the magnetic evolution of the eruptive flare is strongly coupled with its surrounding complex topology. We discuss evidence supporting a "magnetic breakout" process for triggering this eruptive flare. We finally conclude that multipolar fields cannot be neglected in the study and modeling of the origin of CMEs in the corona.

https://iopscience.iop.org/article/10.1086/309376/pdf

R. A. McMullen

Papers

The transition region and coronal explorer

A new view of the solar outer atmosphere by the transition region and Coronal Explorer

The Topology and Evolution of the Bastille Day Flare

The TRACE Mission: Initial Scientific Results