Overview of current development in electrical energy storage technologies and the application potential in power system operation

The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability of the electrical system. The high penetration of distributed generators, linked to the grid through highly controllable power processors based on power electronics, together with the incorporation of electrical energy storage systems, communication technologies, and controllable loads, opens new horizons to the effective expansion of microgrid applications integrated into electrical power systems. This paper carries out an overview about microgrid structures and control techniques at different hierarchical levels. At the power converter level, a detailed analysis of the main operation modes and control structures for power converters belonging to microgrids is carried out, focusing mainly on grid-forming, grid-feeding, and grid-supporting configurations. This analysis is extended as well toward the hierarchical control scheme of microgrids, which, based on the primary, secondary, and tertiary control layer division, is devoted to minimize the operation cost, coordinating support services, meanwhile maximizing the reliability and the controllability of microgrids. Finally, the main grid services that microgrids can offer to the main network, as well as the future trends in the development of their operation and control for the next future, are presented and discussed.

Control of Power Converters in AC Microgrids

Traditional engineering instruction is deductive, beginning with theories and progressing to the applications of those theories Alternative teaching approaches are more inductive Topics are introduced by presenting specific observations, case studies or problems, and theories are taught or the students are helped to discover them only after the need to know them has been established This study reviews several of the most commonly used inductive teaching methods, including inquiry learning, problem-based learning, project-based learning, case-based teaching, discovery learning, and just-in-time teaching The paper defines each method, highlights commonalities and specific differences, and reviews research on the effectiveness of the methods While the strength of the evidence varies from one method to another, inductive methods are consistently found to be at least equal to, and in general more effective than, traditional deductive methods for achieving a broad range of learning outcomes

Inductive Teaching and Learning Methods: Definitions, Comparisons, and Research Bases

http://www.paredox.com/foswiki/pub/Luichart/RedoxTechnicalPapers/Battery_energy_storage_technology_for_power_systemsAn_overview.pdf

Battery Energy Storage Technology for power systems-An overview

Large-scale deployment of intermittent renewable energy (namely wind energy and solar PV) may entail new challenges in power systems and more volatility in power prices in liberalized electricity markets. Energy storage can diminish this imbalance, relieving the grid congestion, and promoting distributed generation. The economic implications of grid-scale electrical energy storage technologies are however obscure for the experts, power grid operators, regulators, and power producers. A meticulous techno-economic or cost-benefit analysis of electricity storage systems requires consistent, updated cost data and a holistic cost analysis framework. To this end, this study critically examines the existing literature in the analysis of life cycle costs of utility-scale electricity storage systems, providing an updated database for the cost elements (capital costs, operational and maintenance costs, and replacement costs). Moreover, life cycle costs and levelized cost of electricity delivered by electrical energy storage is analyzed, employing Monte Carlo method to consider uncertainties. The examined energy storage technologies include pumped hydropower storage, compressed air energy storage (CAES), flywheel, electrochemical batteries (e.g. lead–acid, NaS, Li-ion, and Ni–Cd), flow batteries (e.g. vanadium-redox), superconducting magnetic energy storage, supercapacitors, and hydrogen energy storage (power to gas technologies). The results illustrate the economy of different storage systems for three main applications: bulk energy storage, T&D support services, and frequency regulation.

Electrical energy storage systems: A comparative life cycle cost analysis

Passive damping is the most adopted method to guarantee the stability of LCL-filter-based grid converters. The method is simple and, if the switching and sampling frequencies are sufficiently high, the damping losses are negligible. This letter proposes the tuning of different passive damping methods and an analytical estimation of the damping losses allowing the choice of the minimum resistor value resulting in a stable current control and not compromising the LCL-filter effectiveness. Stability, including variations in the grid inductance, is studied through root locus analysis in the z-plane. The analysis is validated both with simulation and with experiments.

/pdf/analysis-of-the-passive-damping-losses-in-lcl-filter-based-3j1jeo4rr1.pdf

Analysis of the Passive Damping Losses in LCL-Filter-Based Grid Converters

Three-phase active rectifiers guarantee sinusoidal input currents and unity power factor at the price of a high switching frequency ripple. To adopt an LCL-filter, instead of an L-filter, allows using reduced values for the inductances and so preserving dynamics. However, stability problems can arise in the current control loop if the present resonance is not properly damped. Passive damping simply adds resistors in series with the LCL-filter capacitors. This simplicity is at the expense of increased losses and encumbrances. Active damping modifies the control algorithm to attain stability without using dissipative elements but, sometimes, needing additional sensors. This solution has been addressed in many publications. The lead-lag network method is one of the first reported procedures and continues being in use. However, neither there is a direct tuning procedure (without trial and error) nor its rationale has been explained. Thus, in this paper a straightforward procedure is developed to tune the lead-lag network with the help of software tools. The rationale of this procedure, based on the capacitor current feedback, is elucidated. Stability is studied by means of the root locus analysis in z-plane. Selecting the lead-lag network for the maximum damping in the closed-loop poles uses a simple optimization algorithm. The robustness against the grid inductance variation is also analyzed. Simulations and experiments confirm the validity of the proposed design flow.

/pdf/systematic-design-of-the-lead-lag-network-method-for-active-nnp43gina7.pdf

Systematic Design of the Lead-Lag Network Method for Active Damping in LCL-Filter Based Three Phase Converters

In flywheel based energy storage systems (FESSs), a flywheel stores mechanical energy that interchanges in form of electrical energy by means of an electrical machine with a bidirectional power converter. FESSs are suitable whenever numerous charge and discharge cycles (hundred of thousands) are needed with medium to high power (kW to MW) during short-time periods (seconds–minutes). Monitoring of the FESS state of charge is simple and reliable as only the spinning speed is needed. The materials for the flywheel, the type of electrical machine, the type of bearings and the confinement atmosphere which all together determine the FESSs energy efficiency (>85%) are reviewed. Main FESS applications: power quality, traction and aerospace are presented. Additionally in this paper it is presented the simulation of an isolated wind power system (IWPS) consisting of a wind turbine generator (WTG), a consumer load, a synchronous machine (SM) and a FESS. A low-speed iron flywheel driven by an asynchronous machine (ASM) is sized for the presented IWPS. The simulation results with graphs for system frequency, system voltage, active powers of the different elements, and FESS-ASM speed, direct and quadrature currents are presented showing that the FESS effectively smoothes the wind power and consumer load variations.

Flywheel energy storage systems: Review and simulation for an isolated wind power system

In flywheel based energy storage systems, a flywheel stores mechanical energy that interchanges in form of electrical energy by means of an electrical machine with a bidirectional power converter. Flywheel based energy storage systems are suitable whenever numerous charge and discharge cycles (hundred of thousands) are needed with medium to high power (kW to MW) during short periods (seconds). The materials for the flywheel, the type of electrical machine, the type of bearings and the confinement atmosphere determine the energy efficiency (>85%) of the flywheel based energy storage systems. Monitoring of state of charge is simple and reliable as only spinning speed is needed. Flywheel based energy storage systems are commercially available with more than a dozen of manufacturers. Amongst the applications of flywheel based energy storage systems are: uninterruptible power supplies, hybrid power systems, power grids feeding trains, hybrid vehicles and space satellites.

Review of flywheel based energy storage systems

This study presents the modelling and dynamic simulation of a high penetration wind diesel power system (WDPS) consisting of a diesel generator (DG), a wind turbine generator (WTG), consumer load, dump load and a battery energy storage system (BESS). First the WDPS architecture and the models of the WDPS components are described. The WDPS is simulated in wind-only (WO) mode where the DG is not running and the WTG supply active power and in wind-diesel (WD) mode where both DG and WTG supply power. The simulation results are given showing graphs of the main electric variables in the WDPS (system frequency and voltage and active power in each component) and main battery variables (current, voltage and state of charge). The results in the WO mode show how the BESS, under the command of a proportional-integral-derivative (PID) controller, supplies/stores active power to regulate the isolated system frequency. The WD control enables the BESS to smooth the load and wind power variations, so that the isolated system power quality is improved. Also it is shown in the WD mode a peak shaving application where the control orders the BESS to supply active power temporarily to support system frequency in a DG overload situation.

https://ietresearch.onlinelibrary.wiley.com/doi/epdf/10.1049/iet-gtd.2015.0435

R. Sebastian

Papers

Analysis of the Passive Damping Losses in LCL-Filter-Based Grid Converters

Systematic Design of the Lead-Lag Network Method for Active Damping in LCL-Filter Based Three Phase Converters

Flywheel energy storage systems: Review and simulation for an isolated wind power system

Review of flywheel based energy storage systems

Application of a battery energy storage for frequency regulation and peak shaving in a wind diesel power system