This paper reviews the state-of-the art in vibration energy harvesting for wireless, self-powered microsystems. Vibration-powered generators are typically, although not exclusively, inertial spring and mass systems. The characteristic equations for inertial-based generators are presented, along with the specific damping equations that relate to the three main transduction mechanisms employed to extract energy from the system. These transduction mechanisms are: piezoelectric, electromagnetic and electrostatic. Piezoelectric generators employ active materials that generate a charge when mechanically stressed. A comprehensive review of existing piezoelectric generators is presented, including impact coupled, resonant and human-based devices. Electromagnetic generators employ electromagnetic induction arising from the relative motion between a magnetic flux gradient and a conductor. Electromagnetic generators presented in the literature are reviewed including large scale discrete devices and wafer-scale integrated versions. Electrostatic generators utilize the relative movement between electrically isolated charged capacitor plates to generate energy. The work done against the electrostatic force between the plates provides the harvested energy. Electrostatic-based generators are reviewed under the classifications of in-plane overlap varying, in-plane gap closing and out-of-plane gap closing; the Coulomb force parametric generator and electret-based generators are also covered. The coupling factor of each transduction mechanism is discussed and all the devices presented in the literature are summarized in tables classified by transduction type; conclusions are drawn as to the suitability of the various techniques.

/pdf/energy-harvesting-vibration-sources-for-microsystems-46t885pwdp.pdf

Energy harvesting vibration sources for microsystems applications

The field of power harvesting has experienced significant growth over the past few years due to the ever-increasing desire to produce portable and wireless electronics with extended lifespans. Current portable and wireless devices must be designed to include electrochemical batteries as the power source. The use of batteries can be troublesome due to their limited lifespan, thus necessitating their periodic replacement. In the case of wireless sensors that are to be placed in remote locations, the sensor must be easily accessible or of a disposable nature to allow the device to function over extended periods of time. Energy scavenging devices are designed to capture the ambient energy surrounding the electronics and convert it into usable electrical energy. The concept of power harvesting works towards developing self-powered devices that do not require replaceable power supplies. A number of sources of harvestable ambient energy exist, including waste heat, vibration, electromagnetic waves, wind, flowing water, and solar energy. While each of these sources of energy can be effectively used to power remote sensors, the structural and biological communities have placed an emphasis on scavenging vibrational energy with piezoelectric materials. This article will review recent literature in the field of power harvesting and present the current state of power harvesting in its drive to create completely self-powered devices.

/pdf/a-review-of-power-harvesting-using-piezoelectric-materials-k69swwfj1u.pdf

A review of power harvesting using piezoelectric materials (2003–2006)

Energy harvesting generators are attractive as inexhaustible replacements for batteries in low-power wireless electronic devices and have received increasing research interest in recent years. Ambient motion is one of the main sources of energy for harvesting, and a wide range of motion-powered energy harvesters have been proposed or demonstrated, particularly at the microscale. This paper reviews the principles and state-of-art in motion-driven miniature energy harvesters and discusses trends, suitable applications, and possible future developments.

/pdf/energy-harvesting-from-human-and-machine-motion-for-wireless-3lsf4oudvo.pdf

Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices

Vibration energy harvesting is receiving a considerable amount of interest as a means for powering wireless sensor nodes This paper presents a small (component volume 01 cm3, practical volume 015 cm3) electromagnetic generator utilizing discrete components and optimized for a low ambient vibration level based upon real application data The generator uses four magnets arranged on an etched cantilever with a wound coil located within the moving magnetic field Magnet size and coil properties were optimized, with the final device producing 46 µW in a resistive load of 4 k? from just 059 m s-2 acceleration levels at its resonant frequency of 52 Hz A voltage of 428 mVrms was obtained from the generator with a 2300 turn coil which has proved sufficient for subsequent rectification and voltage step-up circuitry The generator delivers 30% of the power supplied from the environment to useful electrical power in the load This generator compares very favourably with other demonstrated examples in the literature, both in terms of normalized power density and efficiency

/pdf/a-micro-electromagnetic-generator-for-vibration-energy-acpebp9i50.pdf

A micro electromagnetic generator for vibration energy harvesting

Power consumption is forecast by the International Technology Roadmap of Semiconductors (ITRS) to pose long-term technical challenges for the semiconductor industry. The purpose of this paper is threefold: (1) to provide an overview of strategies for powering MEMS via non-regenerative and regenerative power supplies; (2) to review the fundamentals of piezoelectric energy harvesting, along with recent advancements, and (3) to discuss future trends and applications for piezoelectric energy harvesting technology. The paper concludes with a discussion of research needs that are critical for the enhancement of piezoelectric energy harvesting devices.

/pdf/powering-mems-portable-devices-a-review-of-non-regenerative-30r5zxggdp.pdf

Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems

A thin film lead zirconate titanate, Pb(Zr,Ti)O 3 (PZT), MEMS power generating device is developed. It is designed to resonate at specific frequencies from an external vibrational energy source, thereby creating electrical energy via the piezoelectric effect. Our cantilever device is designed to have a flat structure with a proof mass added to the end. The Pt/Ti top electrode is patterned into an interdigitated shape on top of the sol–gel-spin coated PZT thin film in order to employ the d33 mode of the piezoelectric transducer. This d33 mode design generates 20 times higher voltage than that of the d31 mode design of the same beam dimension. The base-shaking experiments at the first resonant frequency (13.9 kHz) generate charge proportional to the tip displacement of the cantilever with a linearity coefficient of 4.14 pC/ m. A

MEMS power generator with transverse mode thin film PZT

A thin film lead zirconate titanate Pb(Zr,Ti)O3 (PZT), energy harvesting MEMS device is developed to enable self-supportive sensors for in-service integrity monitoring of large social and environmental infrastructures at remote locations. It is designed to resonate at specific frequencies of an external vibrational energy source, thereby creating electrical energy via the piezoelectric effect. Our cantilever device has a PZT/SiNx bimorph structure with a proof mass added to the end. The Pt/Ti top electrode is patterned into an interdigitated shape on top of the sol-gel-spin coated PZT thin film in order to employ the d
 33 mode. The base-shaking experiment at the first resonant frequency of the cantilever (170 × 260 μm) generates 1 μW of continuous electrical power to a 5.2 MΩ resistive load at 2.4 V DC. The effect of proof mass, beam shape and damping on the power generating performance are modeled to provide a design guideline for maximum power harvesting from environmentally available low frequency vibrations. A spiral cantilever is designed to achieve compactness, low resonant frequency and minimum damping coefficient, simultaneously.

R. Sood

Papers

MEMS power generator with transverse mode thin film PZT

Energy harvesting MEMS device based on thin film piezoelectric cantilevers