We describe complete design of a synthetic eukaryotic genome, Sc2.0, a highly modified Saccharomyces cerevisiae genome reduced in size by nearly 8%, with 1.1 megabases of the synthetic genome deleted, inserted, or altered. Sc2.0 chromosome design was implemented with BioStudio, an open-source framework developed for eukaryotic genome design, which coordinates design modifications from nucleotide to genome scales and enforces version control to systematically track edits. To achieve complete Sc2.0 genome synthesis, individual synthetic chromosomes built by Sc2.0 Consortium teams around the world will be consolidated into a single strain by "endoreduplication intercross." Chemically synthesized genomes like Sc2.0 are fully customizable and allow experimentalists to ask otherwise intractable questions about chromosome structure, function, and evolution with a bottom-up design strategy.

https://science.sciencemag.org/content/sci/355/6329/1040.full.pdf

Design of a synthetic yeast genome

Nature uses 64 codons to encode the synthesis of proteins from the genome, and chooses 1 sense codon-out of up to 6 synonyms-to encode each amino acid. Synonymous codon choice has diverse and important roles, and many synonymous substitutions are detrimental. Here we demonstrate that the number of codons used to encode the canonical amino acids can be reduced, through the genome-wide substitution of target codons by defined synonyms. We create a variant of Escherichia coli with a four-megabase synthetic genome through a high-fidelity convergent total synthesis. Our synthetic genome implements a defined recoding and refactoring scheme-with simple corrections at just seven positions-to replace every known occurrence of two sense codons and a stop codon in the genome. Thus, we recode 18,214 codons to create an organism with a 61-codon genome; this organism uses 59 codons to encode the 20 amino acids, and enables the deletion of a previously essential transfer RNA.

Total synthesis of Escherichia coli with a recoded genome

INTRODUCTION Design and construction of an extensively modified yeast genome is a direct means to interrogate the integrity, comprehensiveness, and accuracy of the knowledge amassed by the yeast community to date. The international synthetic yeast genome project (Sc2.0) aims to build an entirely designer, synthetic Saccharomyces cerevisiae genome. The synthetic genome is designed to increase genome stability and genetic flexibility while maintaining cell fitness near that of the wild type. A major challenge for a genome synthesis lies in identifying and eliminating fitness-reducing sequence variants referred to as “bugs.” RATIONALE Debugging is imperative for successfully building a fit strain encoding a synthetic genome. However, it is time-consuming and laborious to replace wild-type genes and measure strain fitness systematically. The Sc2.0 PCRTag system, which specifies recoded sequences within open reading frames (ORFs), is designed to distinguish synthetic from wild-type DNA in a simple polymerase chain reaction (PCR) assay. This system provides an opportunity to efficiently map bugs to the related genes by using a pooling strategy and subsequently correct them. Further, as we identify bugs in designer sequences, we will identify gaps in our knowledge and gain a deeper understanding of genome biology, allowing refinement of future design strategies. RESULTS We chemically synthesized yeast chromosome X, synX, designed to be 707,459 base pairs. A high-throughput mapping strategy called pooled PCRTag mapping (PoPM) was developed to identify unexpected bugs during chromosome assembly. With this method, the genotypes of pools of colonies with normal or defective fitness are assessed by PCRTag analysis. The PoPM method exploits the patchwork structure of synthetic and wild-type sequences observed in the majority of putative synthetic DNA integrants or meiotic progeny derived from synthetic/wild-type strain backcross. PCRTag analysis with both synthetic and wild-type specific primers, carried out with genomic DNA extracted from the two pools of clones (normal fitness versus a specific growth defect), can be used to identify regions of synthetic DNA missing from the normal fitness pool and, analogously, sections of wild-type DNA absent from the specific growth-defect pool. In this way, the defect can be efficiently mapped to a very small overlapping region, and subsequent systematic analysis of designed changes in that region can be used to identify the bug. Several bugs were identified and corrected, including a growth defect mapping to a specific synonymously recoded PCRTag sequence in the essential FIP1 ORF and the effect of introducing a loxPsym site that unexpectedly altered the the promoter function of a nearby gene, ATP2. In addition, meiotic crossover was employed to repair the massive duplications and rearrangements in the synthetic chromosome. The debugged synX strain exhibited high fitness under a variety of conditions tested and in competitive growth with the wild-type strain. CONCLUSION Synthetic yeast chromosome X was chemically synthesized from scratch, a rigorous, incremental step toward complete synthesis of the whole yeast genome. Thousands of designer modifications in synX revealed extensive flexibility of the yeast genome. We developed an efficient mapping method, PoPM, to identify bugs during genome synthesis, generalizable to any watermarked synthetic chromosome, and several details of yeast biology were uncovered by debugging. Considering the numerous gene-associated PCRTags available in the synthetic chromosomes, PoPM may represent a powerful tool to map interesting phenotypes of mutated synthetic strains or even mutated wild-type strains to the relevant genes. It may also be useful to study yeast genetic interactions when an unexpected phenotype is generated by alterations in two or more genes, substantially expanding understanding of yeast genomic and cellular functions. The PoPM method is also likely to be useful for mapping phenotype(s) resulting from the genome SCRaMbLE system.

/pdf/bug-mapping-and-fitness-testing-of-chemically-synthesized-4ag78l7qpc.pdf

Bug mapping and fitness testing of chemically synthesized chromosome X

Recent development in electrocatalysts for hydrogen production through water electrolysis

INTRODUCTION Although much effort has been devoted to studying yeast in the past few decades, our understanding of this model organism is still limited. Rapidly developing DNA synthesis techniques have made a “build-to-understand” approach feasible to reengineer on the genome scale. Here, we report on the completion of a 770-kilobase synthetic yeast chromosome II (synII). SynII was characterized using extensive Trans-Omics tests. Despite considerable sequence alterations, synII is virtually indistinguishable from wild type. However, an up-regulation of translational machinery was observed and can be reversed by restoring the transfer RNA (tRNA) gene copy number. RATIONALE Following the “design-build-test-debug” working loop, synII was successfully designed and constructed in vivo. Extensive Trans-Omics tests were conducted, including phenomics, transcriptomics, proteomics, metabolomics, chromosome segregation, and replication analyses. By both complementation assays and SCRaMbLE (synthetic chromosome rearrangement and modification by loxP -mediated evolution), we targeted and debugged the origin of a growth defect at 37°C in glycerol medium. RESULTS To efficiently construct megabase-long chromosomes, we developed an I- Sce I–mediated strategy, which enables parallel integration of synthetic chromosome arms and reduced the overall integration time by 50% for synII. An I- Sce I site is introduced for generating a double-strand break to promote targeted homologous recombination during mitotic growth. Despite hundreds of modifications introduced, there are still regions sharing substantial sequence similarity that might lead to undesirable meiotic recombinations when intercrossing the two semisynthetic chromosome arm strains. Induction of the I- Sce I–mediated double-strand break is otherwise lethal and thus introduced a strong selective pressure for targeted homologous recombination. Since our strategy is designed to generate a markerless synII and leave the URA3 marker on the wild-type chromosome, we observed a tenfold increase in URA3 -deficient colonies upon I- Sce I induction, meaning that our strategy can greatly bias the crossover events toward the designated regions. By incorporating comprehensive phenotyping approaches at multiple levels, we demonstrated that synII was capable of powering the growth of yeast indistinguishably from wild-type cells (see the figure), showing highly consistent biological processes comparable to the native strain. Meanwhile, we also noticed modest but potentially significant up-regulation of the translational machinery. The main alteration underlying this change in expression is the deletion of 13 tRNA genes. A growth defect was observed in one very specific condition—high temperature (37°C) in medium with glycerol as a carbon source—where colony size was reduced significantly. We targeted and debugged this defect by two distinct approaches. The first approach involved phenotype screening of all intermediate strains followed by a complementation assay with wild-type sequences in the synthetic strain. By doing so, we identified a modification resulting from PCRTag recoding in TSC10 , which is involved in regulation of the yeast high-osmolarity glycerol (HOG) response pathway. After replacement with wild-type TSC10 , the defect was greatly mitigated. The other approach, debugging by SCRaMbLE, showed rearrangements in regions containing HOG regulation genes. Both approaches indicated that the defect is related to HOG response dysregulation. Thus, the phenotypic defect can be pinpointed and debugged through multiple alternative routes in the complex cellular interactome network. CONCLUSION We have demonstrated that synII segregates, replicates, and functions in a highly similar fashion compared with its wild-type counterpart. Furthermore, we believe that the iterative “design-build-test-debug” cycle methodology, established here, will facilitate progression of the Sc2.0 project in the face of the increasing synthetic genome complexity.

/pdf/deep-functional-analysis-of-synii-a-770-kilobase-synthetic-4e1vix1y7z.pdf

Deep functional analysis of synII, a 770-kilobase synthetic yeast chromosome

INTRODUCTION The Saccharomyces cerevisiae 2.0 project (Sc2.0) aims to modify the yeast genome with a series of densely spaced designer changes. Both a synthetic yeast chromosome arm (synIXR) and the entirely synthetic chromosome (synIII) function with high fitness in yeast. For designer genome synthesis projects, precise engineering of the physical sequence to match the specified design is important for the systematic evaluation of underlying design principles. Yeast can maintain nuclear chromosomes as rings, occurring by chance at repeated sequences, although the cyclized format is unfavorable in meiosis given the possibility of dicentric chromosome formation from meiotic recombination. Here, we describe the de novo synthesis of synthetic yeast chromosome V (synV) in the “Build-A-Genome China” course, perfectly matching the designer sequence and bearing loxPsym sites, distinguishable watermarks, and all the other features of the synthetic genome. We generated a ring synV derivative with user-specified cyclization coordinates and characterized its performance in mitosis and meiosis. RATIONALE Systematic evaluation of underlying Sc2.0 design principles requires that the final assembled synthetic genome perfectly match the designed sequence. Given the size of yeast chromosomes, synthetic chromosome construction is performed iteratively, and new mutations and unpredictable events may occur during synthesis; even a very small number of unintentional nucleotide changes across the genome could have substantial effects on phenotype. Therefore, precisely matching the physical sequence to the designed sequence is crucial for verification of the design principles in genome synthesis. Ring chromosomes can extend those design principles to provide a model for genomic rearrangement, ring chromosome evolution, and human ring chromosome disorders. RESULTS We chemically synthesized, assembled, and incorporated designer chromosome synV (536,024 base pairs) of S. cerevisiae according to Sc2.0 principles, based on the complete nucleotide sequence of native yeast chromosome V (576,874 base pairs). This work was performed as part of the “Build-A-Genome China” course in Tianjin University. We corrected all mutations found—including duplications, substitutions, and indels—in the initial synV strain by using integrative cotransformation of the precise desired changes and by means of a clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9)–based method. Altogether, 3331 corrected base pairs were required to match to the designed sequence. We generated a strain that exactly matches all designer sequence changes that displays high fitness under a variety of culture conditions. All corrections were verified with whole-genome sequencing; RNA sequencing revealed only minor changes in gene expression—most notably, decreases in expression of genes relocated near synthetic telomeres as a result of design. We constructed a functional circular synV (ring_synV) derivative in yeast by precisely joining both chromosome ends (telomeres) at specified coordinates. The ring chromosome showed restoration of subtelomeric gene expression levels. The ring_synV strain exhibited fitness comparable with that of the linear synV strain, revealed no change in sporulation frequency, but notably reduced spore viability. In meiosis, heterozygous or homozygous diploid ring_wtV and ring_synV chromosomes behaved similarly, exhibiting substantially higher frequency of the formation of zero-spore tetrads, a type that was not seen in the rod chromosome diploids. Rod synV chromosomes went through meiosis with high spore viability, despite no effort having been made to preserve meiotic competency in the design of synV. CONCLUSION The perfect designer-matched synthetic chromosome V provides strategies to edit sequence variants and correct unpredictable events, such as off-target integration of extra copies of synthetic DNA elsewhere in the genome. We also constructed a ring synthetic chromosome derivative and evaluated its fitness and stability in yeast. Both synV and synVI can be circularized and can power yeast cell growth without affecting fitness when gene content is maintained. These fitness and stability phenotypes of the ring synthetic chromosome in yeast provide a model system with which to probe the mechanism of human ring chromosome disorders.

http://science.sciencemag.org/content/sci/355/6329/eaaf4704.full.pdf

Ran Tao

Papers

"Perfect" designer chromosome v and behavior of a ring derivative