scispace - formally typeset
R

Richard D. Sisson

Researcher at Worcester Polytechnic Institute

Publications -  112
Citations -  1926

Richard D. Sisson is an academic researcher from Worcester Polytechnic Institute. The author has contributed to research in topics: Microstructure & Thermal barrier coating. The author has an hindex of 25, co-authored 108 publications receiving 1647 citations. Previous affiliations of Richard D. Sisson include Purdue University & Tiffany & Co..

Papers
More filters
Journal ArticleDOI

Effect of Particle Size and Surface Treatment on Si/Graphene Nanocomposite Lithium-Ion Battery Anodes

TL;DR: In this article, the performance of Si nanoparticles as anode material in lithium ion batteries was investigated and it was found that the piranha pre-treatment before introduction of silane agent provided more stable cycling performance for all sizes tested.
Journal ArticleDOI

Phase Transformations of Plasma‐Sprayed Zirconia–Ceria Thermal Barrier Coatings

TL;DR: In this article, phase constituents and transformations of TBCs with CeO 2 -stabilized ZrO 2 (CSZ; 16-26 wt% CeO2 ) have been investigated using X-ray diffractometry (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS).
Journal ArticleDOI

Statistically Guided Development of Laser-Assisted Cold Spray for Microstructural Control of Ti-6Al-4V

TL;DR: In this paper, an L25 orthogonal array was created with three parameters independent of particle velocity considered thus to be the independent thermal parameters (ITPs) of LACS: powder feed rate, raster speed, and laser power.

Environmental degradation of engineering materials in aggressive environments

TL;DR: The proceedings of the second conference on Environmental Degradation of Engineering Materials held at Virginia Polytechnic Institute on September 21-23, 1981 have been published in this paper, which describes fatigue and corrosion fatigue, liquid metal embrittlement, nuclear environment effects, degradation of composites and polymers, stress corrosion cracking and both analytical and experimental attempts to simulate or model the process of degradation.
Journal ArticleDOI

A Model for Converting Dilatometric Strain Measurements to the Fraction of Phase Formed during the Transformation of Austenite to Martensite in Powder Metallurgy Steels

TL;DR: In this article, a model is developed to allow converting dilatometric strains that occur during the continuous cooling transformation (CCT) of austenite to martensite to volume fraction Martensite formed in powder metallurgy steels.