Research in the use of organic polymers as the active semiconductors in light-emitting diodes has advanced rapidly, and prototype devices now meet realistic specifications for applications. These achievements have provided insight into many aspects of the background science, from design and synthesis of materials, through materials fabrication issues, to the semiconductor physics of these polymers.

Electroluminescence in conjugated polymers

Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics.

Charge-Transfer and Energy-Transfer Processes in π-Conjugated Oligomers and Polymers: A Molecular Picture

Synthetic Principles for Bandgap Control in Linear pi-Conjugated Systems.

Since the initial discovery in 1977, that polyacetylene (CH)(x), now commonly known as the prototype conducting polymer, could be p- or n-doped either chemically or electrochemically to the metallic state, the development of the field of conducting polymers has continued to accelerate at an unexpectedly rapid rate and a variety of other conducting polymers and their derivatives have been discovered. Other types of doping are also possible, such as "photo-doping" and "charge-injection doping" in which no counter dopant ion is involved. One exciting challenge is the development of low-cost disposable plastic/paper electronic devices. Conventional inorganic conductors, such as metals, and semiconductors, such as silicon, commonly require multiple etching and lithographic steps in fabricating them for use in electronic devices. The number of processing and etching steps involved limits the minimum price. On the other hand, conducting polymers combine many advantages of plastics, for example, flexibility and processing from solution, with the additional advantage of conductivity in the metallic or semiconducting regimes; however, the lack of simple methods to obtain inexpensive conductive polymer shapes/patterns limit many applications. Herein is described a novel, simple, and cheap method to prepare patterns of conducting polymers by a process which we term, "Line Patterning".

"Synthetic Metals": A Novel Role for Organic Polymers (Nobel Lecture).

Doped polyacetylene forms a new class of conducting polymers in which the electrical conductivity can be systematically and continuously varied over a range of eleven orders of magnitude. Transport studies and far-infrared transmission measurements imply a metal-to-insulator transition at dopant concentrations near 1%.

Electrical Conductivity in Doped Polyacetylene.

Synthesis of highly conducting films of derivatives of polyacetylene, (CH)x

A series of experiments are reported which demonstrate that donors or acceptors can dope polyacetylene to n type or p type, respectively, and that the two kinds of dopants can compensate one another. The formation of a rectifying p‐n junction is demonstrated. These results suggest the possibility of utilizing doped polyacetylene in a variety of potential semiconductor device applications.

Polyacetylene, (CH)x: n‐type and p‐type doping and compensation

A variety of rectifying junctions have been fabricated using doped and undoped (CH)x. Schottky diodes formed between metallic AsF5‐doped (CH)x and n‐type semiconductors indicate high [CH(AsF5)y]x electronegativity. The p‐type character of undoped trans‐ (CH)x is confirmed by Schottky‐barrier formation with low‐work‐function metals. An undoped p‐ (CH)x : n‐ZnS heterojunction has been demonstrated with an open‐circuit voltage of 0.8 V. These results point to the potential of (CH)x as a photosensitive material for use in solar‐cell applications.

Junction formation with pure and doped polyacetylene

Photoelectrochemical photovoltaic cells have been fabricated using polyacetylene, (CH)x, as the active photoelectrode. Using a sodium polysulfide solution as electrolyte, Voc∼0.3 V and Isc∼40 μA/cm2 were obtained under illumination of approximately 1 sun. Under present conditions, the cell efficiency is limited by the series resistance, the small effective area of the electrode configuration, and the absorbance of the solution.

S. C. Gau

Papers

Electrical Conductivity in Doped Polyacetylene.

Synthesis of highly conducting films of derivatives of polyacetylene, (CH)x

Polyacetylene, (CH)x: n‐type and p‐type doping and compensation

Junction formation with pure and doped polyacetylene

Polyacetylene, (CH)x: Photoelectrochemical solar cell