This work contributes to fill one of the gaps regarding nanoplastic interactions with biological systems by producing polyethylene terephthalate (PET) model nanoplastics, similar to those found in the marine environment, by means of a fast top-down approach based on mechanical fragmentation. Their size distribution and morphology were characterized by laser diffraction and atomic force microscopy (AFM). Their autofluorescence was studied by spectrofluorimetry and fluorescence imaging, being a key property for the evaluation of their interaction with biota. The emission spectra of label-free nanoplastics were comparable with those of PET nanoplastics labeled with Nile red. Finally, the suitability of label-free nanoplastics for biological studies was assessed by in vitro exposure with Mytilus galloprovincialis hemolymphatic cells in a time interval up to 6 h. The nanoplastic internalization into these cells, known to be provided with phagocytic activity, was assessed by fluorescence microscopy. The obtained results underlined that the autofluorescence of the model PET nanoplastics produced in the laboratory was adequate for biological studies having the potential to overcome the disadvantages commonly associated with several fluorescent dyes, such as the tendency to also stain other organic materials different from plastics, to form aggregates due to intermolecular interactions at high concentrations with a consequent decrease in fluorescence intensity, and to dye desorption from nanoparticles. The results of the autofluorescence study provide an innovative approach for plastic risk assessment.

https://www.mdpi.com/2079-4991/12/9/1560/pdf?version=1652330031

Autofluorescence of Model Polyethylene Terephthalate Nanoplastics for Cell Interaction Studies

Raman imaging has advanced recently to be able to directly visualise microplastics and even nanoplastics. However, the generated scanning spectrum matrix, akin to a hyperspectral matrix, is challenging to decode. To this end, herein, logic-based, algebra-based, principal component analysis (PCA)-based, and dual-PCA-based algorithms are compared and combined as a PCA/algebra-based algorithm. Specifically, (i) to increase the signal-noise ratio, multiple images that mapped the multiple characteristic peaks of plastics are merged to cross-check each other. The threshold-based logic algorithm is improved by differentiating the intrinsic peak intensity, using an algebra-based algorithm; (ii) PCA can decode the spectrum matrix to generate PCA spectra and PCA images. The PCA spectra can suggest how to further extract information on plastics to merge the corresponding PCA images to enable the capture of microplastics and nanoplastics, by combining and following up with the algebra-based algorithm, called a PCA/algebra-based algorithm; (iii) dual-PCA analysis is employed to guide and extract the multiple PCA spectra towards image merging, to validate the PCA/algebra-based algorithm. We also show that the score percentages of the eigenvalues of PCA can be used to estimate the size amount of the microplastics and nanoplastics in the scanning area, and how to treat the reversed peaks of the PCA spectrum. Overall, the improvement of the algorithms can lead to more effective decoding of the spectrum matrix.

Raman imaging combined with an improved PCA/algebra-based algorithm to capture microplastics and nanoplastics.

Graphene-based nanomaterials have shown wide applications in antimicrobial fields due to their accelerated rate of pathogen resistance and good antimicrobial properties. To apply graphene materials in the antimicrobial test, the graphene materials are usually fabricated as two-dimensional (2D) membranes. In addition, to improve the antimicrobial efficiency, graphene membranes are modified with various functional nanomaterials, such as nanoparticles, biomolecules, polymers, etc. In this review, we present recent advances in the fabrication, functional tailoring, and antimicrobial applications of graphene-based membranes. To implement this goal, we first introduce the synthesis of graphene materials and then the fabrication of 2D graphene-based membranes with potential techniques such as chemical vapor deposition, vacuum filtration, spin-coating, casting, and layer-by-layer self-assembly. Then, we present the functional tailoring of graphene membranes by adding metal and metal oxide nanoparticles, polymers, biopolymers, metal–organic frameworks, etc., with graphene. Finally, we focus on the antimicrobial mechanisms of graphene membranes, and demonstrate typical studies on the use of graphene membranes for antibacterial, antiviral, and antifungal applications. It is expected that this work will help readers to understand the antimicrobial mechanism of various graphene-based membranes and, further, to inspire the design and fabrication of functional graphene membranes/films for biomedical applications.

/pdf/graphene-based-functional-hybrid-membranes-for-antimicrobial-rvovaag1.pdf

Graphene-Based Functional Hybrid Membranes for Antimicrobial Applications: A Review

Microplastics in fish and sediments from the Montenegrin coast (Adriatic Sea): Similarities in accumulation.

Plastic pollution in the world has led to an abundance of microplastics (MPs) and has been identified as a potential factor that can lead to serious environmental problems, especially in oceans and seas. Information on the current status of MPs pollution along the Montenegrin coast is insufficiently investigated. This study monitors the abundance, distribution, and sources of MPs, and identifies present polymers in the surface sediment of the Montenegrin coast, as well as comparison with previous research.Ten sampling sites along the Montenegrin coast were selected to collect surface sediment samples. The upper layer of sediment (0-5 cm) was collected by a Petite ponar grab. The samples were dried, and density separation was performed using a NaCl solution. The abundance and morphological characteristics of MPs were determined using an optical microscope (DP-Soft software), while FT-IR analysis was done to identify the polymer type.Microplastics were identified in all sediment samples with an average abundance of 307 ± 133 (SD) MPs/kg in dry sediment. The highest abundance of MPs was found in locations in the vicinity of highly populated areas, near wastewater discharges, and areas with high fishing and tourist activities. The most dominant shape types of MPs in all samples were filaments and fragments. The most common colors of MPs were blue and red, while the dominant MPs sizes were 0.1-0.5 mm and 0.5-1.0 mm. Of the eight identified polymers, PP, PE, and PET were the most common.This study reveals MPs characteristics (abundance, distribution, shape type, colors, size, polymers type) in surface sediment along the Montenegrin coast, as well as the most significant sources of MPs pollution, and provides important data for further research on MPs to identify the effects of MPs pollution on the quality, health, and functionality of the marine environment. 

/pdf/distribution-and-characterization-of-microplastics-in-marine-2etx6ev6.pdf

Distribution and characterization of microplastics in marine sediments from the Montenegrin coast

Mussels (Mytilus galloprovincialis) collected at three locations in Boka Kotorska Bay, on the Montenegrin Adriatic coast, were analyzed for the first time by optical and Raman microscopy to detect microplastics (MPs) and other emerging contaminants in their soft tissues. Concentrations of six trace metals (Cu, Zn, Mn, Fe, Cd, and Hg) were also measured in the same samples by atomic absorption spectroscopy. Mussels from a location near the urban area of Kotor were found to exhibit the highest content of MPs and other pollutants originating from anthropogenic sources, while farmed mussels showed higher carotenoid as well as nylon content. The hypothesis of MPs acting as a possible secondary route of trace metals ingress in mussels, a thus far scarcely studied topic, was evaluated based on a comparative analysis of the obtained results. In this context, it was noticed that nylon filaments originating from mussel farming equipment might contribute to higher trace metal content. The results showed that the simultaneous analysis of different contaminants in mussels can be a significant step forward in marine environment pollution monitoring and the assessment of human health risks associated with the consumption of contaminated seafood.

https://www.mdpi.com/2077-1312/9/5/544/pdf

Study of Microplastics and Inorganic Contaminants in Mussels from the Montenegrin Coast, Adriatic Sea

Background. New antiviral textiles for the protection and prevention of life-threatening viral diseases are needed. Graphene oxide derivatives are versatile substances that can be combined with fabrics by different green electrochemistry methods. Methods In this study, graphene oxide (GO) nanosheets were combined with textile samples to study GO antiviral potential. GO synthesized in the Chemistry laboratories at the University of Rome Tor Vergata (Italy) and characterized with TEM/EDX, XRD, TGA, Raman spectroscopy, and FTIR, was applied at three different concentrations to linen textiles with the hot-dip and dry method to obtain filters. The GO-treated textiles were tested to prevent infection of a human glioblastoma cell line (U373) with human herpesvirus 6A (HHV-6A). Green electrochemical exfoliation of graphite into the oxidized graphene nanosheets provides a final GO-based product suitable for a virus interaction, mainly depending on the double layer of nanosheets, their corresponding nanometric sizes, and Z-potential value. Results Since GO-treated filters were able to prevent infection of cells in a dose-dependent fashion, our results suggest that GO may exert antiviral properties that can be exploited for medical devices and general use fabrics.

Antiviral Filtering Capacity of GO-Coated Textiles

We report the self-assembly of core–shell GeTe/Sb2Te3 nanowires (NWs) on Si (100), and SiO2/Si substrates by metalorganic chemical vapour deposition, coupled to the vapour–liquid–solid mechanism, catalyzed by Au nanoparticles. Scanning electron microscopy, X-ray diffraction, micro-Raman mapping, high-resolution transmission electron microscopy, and electron energy loss spectroscopy were employed to investigate the morphology, structure, and composition of the obtained core and core–shell NWs. A single crystalline GeTe core and a polycrystalline Sb2Te3 shell formed the NWs, having core and core–shell diameters in the range of 50–130 nm and an average length up to 7 µm.

Sara De Simone

Papers

Study of Microplastics and Inorganic Contaminants in Mussels from the Montenegrin Coast, Adriatic Sea

Antiviral Filtering Capacity of GO-Coated Textiles

MOCVD Growth of GeTe/Sb2Te3 Core–Shell Nanowires