Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

/pdf/dye-sensitized-solar-cells-50b0w2bhsr.pdf

Dye-Sensitized Solar Cells

Pick your Pd partners: A number of catalytic systems have been developed for palladium-catalyzed CH activation/CC bond formation. Recent studies concerning the palladium(II)-catalyzed coupling of CH bonds with organometallic reagents through a PdII/Pd0 catalytic cycle are discussed (see scheme), and the versatility and practicality of this new mode of catalysis are presented. Unaddressed questions and the potential for development in the field are also addressed.

In the past decade, palladium-catalyzed CH activation/CC bond-forming reactions have emerged as promising new catalytic transformations; however, development in this field is still at an early stage compared to the state of the art in cross-coupling reactions using aryl and alkyl halides. This Review begins with a brief introduction of four extensively investigated modes of catalysis for forming CC bonds from CH bonds: PdII/Pd0, PdII/PdIV, Pd0/PdII/PdIV, and Pd0/PdII catalysis. A more detailed discussion is then directed towards the recent development of palladium(II)-catalyzed coupling of CH bonds with organometallic reagents through a PdII/Pd0 catalytic cycle. Despite the progress made to date, improving the versatility and practicality of this new reaction remains a tremendous challenge.

/pdf/palladium-ii-catalyzed-c-h-activation-c-c-cross-coupling-2546yox1wp.pdf

Palladium(II)-catalyzed C-H activation/C-C cross-coupling reactions: versatility and practicality.

Once considered the 'holy grail' of organometallic chemistry, synthetically useful reactions employing C-H bond activation have increasingly been developed and applied to natural product and drug synthesis over the past decade. The ubiquity and relative low cost of hydrocarbons makes C-H bond functionalization an attractive alternative to classical C-C bond forming reactions such as cross-coupling, which require organohalides and organometallic reagents. In addition to providing an atom economical alternative to standard cross - coupling strategies, C-H bond functionalization also reduces the production of toxic by-products, thereby contributing to the growing field of reactions with decreased environmental impact. In the area of C-C bond forming reactions that proceed via a C-H activation mechanism, rhodium catalysts stand out for their functional group tolerance and wide range of synthetic utility. Over the course of the last decade, many Rh-catalyzed methods for heteroatom-directed C-H bond functionalization have been reported and will be the focus of this review. Material appearing in the literature prior to 2001 has been reviewed previously and will only be introduced as background when necessary. The synthesis of complex molecules from relatively simple precursors has long been a goal for many organic chemists. The ability to selectively functionalize a molecule with minimal pre-activation can streamline syntheses and expand the opportunities to explore the utility of complex molecules in areas ranging from the pharmaceutical industry to materials science. Indeed, the issue of selectivity is paramount in the development of all C-H bond functionalization methods. Several groups have developed elegant approaches towards achieving selectivity in molecules that possess many sterically and electronically similar C-H bonds. Many of these approaches are discussed in detail in the accompanying articles in this special issue of Chemical Reviews. One approach that has seen widespread success involves the use of a proximal heteroatom that serves as a directing group for the selective functionalization of a specific C-H bond. In a survey of examples of heteroatom-directed Rh catalysis, two mechanistically distinct reaction pathways are revealed. In one case, the heteroatom acts as a chelator to bind the Rh catalyst, facilitating reactivity at a proximal site. In this case, the formation of a five-membered metallacycle provides a favorable driving force in inducing reactivity at the desired location. In the other case, the heteroatom initially coordinates the Rh catalyst and then acts to stabilize the formation of a metal-carbon bond at a proximal site. A true test of the utility of a synthetic method is in its application to the synthesis of natural products or complex molecules. Several groups have demonstrated the applicability of C-H bond functionalization reactions towards complex molecule synthesis. Target-oriented synthesis provides a platform to test the effectiveness of a method in unique chemical and steric environments. In this respect, Rh-catalyzed methods for C-H bond functionalization stand out, with several syntheses being described in the literature that utilize C-H bond functionalization in a key step. These syntheses are highlighted following the discussion of the method they employ.

/pdf/rhodium-catalyzed-c-c-bond-formation-via-heteroatom-directed-1wd3dm1jdi.pdf

Rhodium-Catalyzed C-C Bond Formation via Heteroatom-Directed C-H Bond Activation

The biaryl structural motif is a predominant feature in many pharmaceutically relevant and biologically active compounds. As a result, for over a century 1 organic chemists have sought to develop new and more efficient aryl -aryl bond-forming methods. Although there exist a variety of routes for the construction of aryl -aryl bonds, arguably the most common method is through the use of transition-metalmediated reactions. 2-4 While earlier reports focused on the use of stoichiometric quantities of a transition metal to carry out the desired transformation, modern methods of transitionmetal-catalyzed aryl -aryl coupling have focused on the development of high-yielding reactions achieved with excellent selectivity and high functional group tolerance under mild reaction conditions. Typically, these reactions involve either the coupling of an aryl halide or pseudohalide with an organometallic reagent (Scheme 1), or the homocoupling of two aryl halides or two organometallic reagents. Although a number of improvements have developed the former process into an industrially very useful and attractive method for the construction of aryl -aryl bonds, the need still exists for more efficient routes whereby the same outcome is accomplished, but with reduced waste and in fewer steps. In particular, the obligation to use coupling partners that are both activated is wasteful since it necessitates the installation and then subsequent disposal of stoichiometric activating agents. Furthermore, preparation of preactivated aryl substrates often requires several steps, which in itself can be a time-consuming and economically inefficient process.

http://aether.cmi.ua.ac.be/artikels/Artikels%20Gitte/Artikels/Reviews/Heck-Type-lautens.pdf

Aryl-aryl bond formation by transition-metal-catalyzed direct arylation.

Although fire is now rarely used in synthetic chemistry, it was not until Robert Bunsen invented the burner in 1855 that the energy from this heat source could be applied to a reaction vessel in a focused manner. The Bunsen burner was later superseded by the isomantle, oil bath, or hot plate as a source for applying heat to a chemical reaction. In the past few years, heating and driving chemical reactions by microwave energy has been an increasingly popular theme in the scientific community. This nonclassical heating technique is slowly moving from a laboratory curiosity to an established technique that is heavily used in both academia and industry. The efficiency of "microwave flash heating" in dramatically reducing reaction times (from days and hours to minutes and seconds) is just one of the many advantages. This Review highlights recent applications of controlled microwave heating in modern organic synthesis, and discusses some of the underlying phenomena and issues involved.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/anie.200400655

Controlled microwave heating in modern organic synthesis.

Synthese de derives d'amide de l'acide selenobenzoique a partir des derives du benzonitrile

Synthesis utilizing reducing ability of carbon monoxide. A new method for synthesis of selenocarboxamides: reaction of nitriles with selenium, carbon monoxide, and water

Ru3(CO)12-catalyzed reaction of yne–imines with carbon monoxide leading to bicyclic α,β-unsaturated lactams

We wish to report that iridium complexes [IrCl(CO){sub 3}]{sub n} and Ir{sub 4}(CO){sub 13} catalyze the reaction of alkenes with a hydrosilane HSiR{sub 3} and carbon monoxide (eq 1) to yield enol silyl ethers of acylsilanes. This unprecedented reaction results in regioselective introduction of carbon monoxide into the terminal carbon atom of alkenes, forming a siloxy(silyl)methylene unit(=C(SiR{sub 3})-OSiR{sub 3}). The present Ir-catalyzed reaction represents the first example of formation of acylsilane derivatives form the HSiR{sub 3}/CO combination. The new catalytic reaction can be applied to a wide variety of terminal alkenes. The acetal, cyano, and epoxide functional groups remain intact through this catalysis. The mechanism of the reaction may involve the possible intervention of a siloxycarbyne comple intermediate. 12 refs., 1 fig., 1 tab.

Conversion of alkenes to enol silyl ethers of acylsilanes by iridium-catalyzed reaction with a hydrosilane and carbon monoxide

The ruthenium- and rhodium-catalyzed intramolecular C-H/olefin coupling reactions of 1-(2-pyridyl)-1,5- and 1,6-dienes proceeded regio- and stereoselecively to give 5- or 6-membered ring products.

Shinji Murai

Papers

Synthesis utilizing reducing ability of carbon monoxide. A new method for synthesis of selenocarboxamides: reaction of nitriles with selenium, carbon monoxide, and water

Ru3(CO)12-catalyzed reaction of yne–imines with carbon monoxide leading to bicyclic α,β-unsaturated lactams

Conversion of alkenes to enol silyl ethers of acylsilanes by iridium-catalyzed reaction with a hydrosilane and carbon monoxide

Transition Metal-Catalyzed Intramolecular C-H/Olefin Coupling.

Synthesis and Thermal Decarbonylation of 2,3‐Furandiones