It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >

On the capacity of a cellular CDMA system

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

/pdf/in-band-full-duplex-wireless-challenges-and-opportunities-djlyhtrciu.pdf

In-Band Full-Duplex Wireless: Challenges and Opportunities

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

http://faculty.poly.edu/~tsr/wp-content/uploads/publications/abstract17.pdf

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

Recent advances in self-interference cancellation techniques enable in-band full-duplex wireless systems, which transmit and receive simultaneously in the same frequency band with high spectrum efficiency. As a typical application of in-band full-duplex wireless, in-band full-duplex relaying (FDR) is a promising technology to integrate the merits of in-band full-duplex wireless and relaying technology. However, several significant research challenges remain to be addressed before its widespread deployment, including small-size full-duplex device design, channel modeling and estimation, cross-layer/joint resource management, interference management, security, etc. In this paper, we provide a brief survey on some of the works that have already been done for in-band FDR, and discuss the related research issues and challenges. We identify several important aspects of in-band FDR: basics, enabling technologies, information-theoretical performance analysis, key design issues and challenges. Finally, we also explore some broader perspectives for in-band FDR.

In-Band Full-Duplex Relaying: A Survey, Research Issues and Challenges

A CMOS wideband cascaded variable gain amplifier (VGA) with a temperature-independent exponential gain control characteristic is presented in this paper. The exponential gain control function is realized using parasitic bipolar transistors and a control signal converter. The bandwidth is extended using an inductive peaking technique for high-frequency operations. The gain of the VGA varies from -38.8 to 55.3 dB in relation to the control voltage that varies from 0 to 1.8 V. The bandwidth of the proposed VGA is approximately 900 MHz with a gain control range of 94.1 dB. The proposed VGA includes a dc offset cancellation loop to avoid amplification of the dc offset. The VGA is powered by 1.8 V with 11.4 mA. The VGA chip including bondpads occupies an area of 850 mum times 490 mum.

/pdf/a-wideband-cmos-variable-gain-amplifier-with-an-exponential-2clgg6bdq5.pdf

A Wideband CMOS Variable Gain Amplifier With an Exponential Gain Control

A digital 5-bit phase shifter at Ku-band is presented, which is implemented with 0.18-mum RFCMOS technology. n-MOSFET switches and top metal microstrip lines with a first-metal ground allow the phase shifter to have small insertion losses. The proposed 90deg phase shifter utilizing a parallel resonator exhibits broad-band characteristics. All of the circuit components are derived to obtain a minimum phase variation at the operation frequency band. A bridged-T type phase shifter is also analyzed in view of parallel resonance using an ideal equivalent-circuit model. The conditions of the circuit elements are derived in an analytic form, which are used to obtain the broad-band phase characteristics. The fabricated 5-bit phase shifter demonstrates an overall rms phase error less than 12deg from 9 to 15 GHz. Insertion losses of 14.5 dB plusmn 0.5 dB and return losses less than 14 dB are obtained for 32 states at 12 GHz. The proposed 90deg phase shifter has performed a phase shift of 92.3degplusmn3.2deg over 9-15 GHz

https://koasas.kaist.ac.kr/bitstream/10203/1572/1/000234657600038.pdf

Ku-band MMIC phase shifter using a parallel resonator with 0.18-/spl mu/m CMOS technology

A CMOS ultra wideband (UWB) pulse generator with low energy dissipation and high peak amplitude is presented for 6-10 GHz applications. The pulse generator complies with the FCC spectral mask for indoor UWB systems. It consists of a glitch generator, a pulsed oscillator, and a pulse shaping filter. The pulsed oscillator is switched on by the glitch signal only for a short duration, so as to make a UWB pulse. For sub-nanosecond pulse generation, a pulsed oscillator with fast transient response is proposed. A pulse shaping filter makes the oscillator output fall into the FCC spectral mask. The pulse generator is fabricated using a 0.18 mum CMOS process. The core chip has a size of 0.11 mm2. It shows pulse duration of about 500 ps with -10 dB bandwidth of 4.5 GHz from 5.9 to 10.4 GHz. The energy consumption is 27.6 pJ per pulse with a peak-to-peak amplitude of 673 mV on a 50 Omega output load. The generated pulses are very coherent with 1.8 ps RMS jitter.

A CMOS UWB Pulse Generator for 6–10 GHz Applications

A quadrature radar topology with a Tx leakage canceller is presented. The canceller is composed of four branch-line hybrid couplers, a 90deg delay line, and a Wilkinson combiner. It has high Tx-to-Rx isolation and wide bandwidth characteristics. The isolation is 35.27 dB at 24 GHz and does not drop below 30 dB over a 2-GHz bandwidth. Given that the isolation of the branch-line hybrid coupler is 21.5 dB, the enhancement of the isolation is expected to be 13.77 dB. A quadrature Doppler radar front-end with the canceller was implemented. The noise level in the mixer output is lower by 9 dB compared with that of a conventional quadrature radar. This radar can measure speed as low as 0.76 mm/s, which correspond to a 0.12-Hz Doppler shift. It is also able to detect signs of the Doppler shift from a moving target due to its quadrature topology.

A Quadrature Radar Topology With Tx Leakage Canceller for 24-GHz Radar Applications

In this paper, feature-based gesture recognition in a frequency modulated continuous wave (FMCW) radar system is introduced. We obtain a range-Doppler map (RDM) from raw signals of FMCW radar and generate a variety of features from the RDM. The features are broadly defined to reflect radar-specific characteristics as well as statistical values commonly used in machine learning. Among these radar features, those that are highly correlated with gesture recognition are selected by the proposed feature selection algorithm, which is a wrapper-based feature selection algorithm incorporated with a quantum-inspired evolutionary algorithm (QEA). Furthermore, the information factor based on the minimum redundancy maximum relevance criterion is applied to QEA in order to find feature subsets effectively. The proposed algorithm is able to extract from all feature sets feature subsets related to gesture recognition, and improves the gesture recognition accuracy of the FMCW radar system. In addition, we analyze which features of the radar are helpful for gesture recognition and perform effective gesture recognition using the features determined through feature analysis.

Songcheol Hong

Papers

A Wideband CMOS Variable Gain Amplifier With an Exponential Gain Control

Ku-band MMIC phase shifter using a parallel resonator with 0.18-/spl mu/m CMOS technology

A CMOS UWB Pulse Generator for 6–10 GHz Applications

A Quadrature Radar Topology With Tx Leakage Canceller for 24-GHz Radar Applications

Feature-Based Hand Gesture Recognition Using an FMCW Radar and its Temporal Feature Analysis