We present a new design for a 1-b full adder featuring hybrid-CMOS design style. The quest to achieve a good-drivability, noise-robustness, and low-energy operations for deep submicrometer guided our research to explore hybrid-CMOS style design. Hybrid-CMOS design style utilizes various CMOS logic style circuits to build new full adders with desired performance. This provides the designer a higher degree of design freedom to target a wide range of applications, thus significantly reducing design efforts. We also classify hybrid-CMOS full adders into three broad categories based upon their structure. Using this categorization, many full-adder designs can be conceived. We will present a new full-adder design belonging to one of the proposed categories. The new full adder is based on a novel xor-xnor circuit that generates xor and xnor full-swing outputs simultaneously. This circuit outperforms its counterparts showing 5%-37% improvement in the power-delay product (PDP). A novel hybrid-CMOS output stage that exploits the simultaneous xor-xnor signals is also proposed. This output stage provides good driving capability enabling cascading of adders without the need of buffer insertion between cascaded stages. There is approximately a 40% reduction in PDP when compared to its best counterpart. During our experimentations, we found out that many of the previously reported adders suffered from the problems of low swing and high noise when operated at low supply voltages. The proposed full adder is energy efficient and outperforms several standard full adders without trading off driving capability and reliability. The new full-adder circuit successfully operates at low voltages with excellent signal integrity and driving capability. To evaluate the performance of the new full adder in a real circuit, we embedded it in a 4- and 8-b, 4-operand carry-save array adder with final carry-propagate adder. The new adder displayed better performance as compared to the standard full adders

/pdf/design-of-robust-energy-efficient-full-adders-for-deep-5ba51kaofh.pdf

Design of Robust, Energy-Efficient Full Adders for Deep-Submicrometer Design Using Hybrid-CMOS Logic Style

This paper presents several architectures and designs of low-power 4-2 and 5-2 compressors capable of operating at ultra low supply voltages. These compressor architectures are anatomized into their constituent modules and different static logic styles based on the same deep submicrometer CMOS process model are used to realize them. Different configurations of each architecture, which include a number of novel 4-2 and 5-2 compressor designs, are prototyped and simulated to evaluate their performance in speed, power dissipation and power-delay product. The newly developed circuits are based on various configurations of the novel 5-2 compressor architecture with the new carry generator circuit, or existing architectures configured with the proposed circuit for the exclusive OR (XOR) and exclusive NOR ( XNOR) [XOR-XNOR] module. The proposed new circuit for the XOR-XNOR module eliminates the weak logic on the internal nodes of pass transistors with a pair of feedback PMOS-NMOS transistors. Driving capability has been considered in the design as well as in the simulation setup so that these 4-2 and 5-2 compressor cells can operate reliably in any tree structured parallel multiplier at very low supply voltages. Two new simulation environments are created to ensure that the performances reflect the realistic circuit operation in the system to which these cells are integrated. Simulation results show that the 4-2 compressor with the proposed XOR-XNOR module and the new fast 5-2 compressor architecture are able to function at supply voltage as low as 0.6 V, and outperform many other architectures including the classical CMOS logic compressors and variants of compressors constructed with various combinations of recently reported superior low-power logic cells.

/pdf/ultra-low-voltage-low-power-cmos-4-2-and-5-2-compressors-for-482wl2l598.pdf

Ultra low-voltage low-power CMOS 4-2 and 5-2 compressors for fast arithmetic circuits

The general objective of our work is to investigate the area and power-delay performances of low-voltage full adder cells in different CMOS logic styles for the predominating tree structured arithmetic circuits. A new hybrid style full adder circuit is also presented. The sum and carry generation circuits of the proposed full adder are designed with hybrid logic styles. To operate at ultra-low supply voltage, the pass logic circuit that cogenerates the intermediate XOR and XNOR outputs has been improved to overcome the switching delay problem. As full adders are frequently employed in a tree structured configuration for high-performance arithmetic circuits, a cascaded simulation structure is introduced to evaluate the full adders in a realistic application environment. A systematic and elegant procedure to scale the transistor for minimal power-delay product is proposed. The circuits being studied are optimized for energy efficiency at 0.18-/spl mu/m CMOS process technology. With the proposed simulation environment, it is shown that some survival cells in stand alone operation at low voltage may fail when cascaded in a larger circuit, either due to the lack of drivability or unsatisfactory speed of operation. The proposed hybrid full adder exhibits not only the full swing logic and balanced outputs but also strong output drivability. The increase in the transistor count of its complementary CMOS output stage is compensated by its area efficient layout. Therefore, it remains one of the best contenders for designing large tree structured arithmetic circuits with reduced energy consumption while keeping the increase in area to a minimum.

/pdf/a-review-of-0-18-spl-mu-m-full-adder-performances-for-tree-na3rj1jl01.pdf

A review of 0.18-/spl mu/m full adder performances for tree structured arithmetic circuits

We present two high-speed and low-power full-adder cells designed with an alternative internal logic structure and pass-transistor logic styles that lead to have a reduced power-delay product (PDP). We carried out a comparison against other full-adders reported as having a low PDP, in terms of speed, power consumption and area. All the full-adders were designed with a 0.18-μm CMOS technology, and were tested using a comprehensive testbench that allowed to measure the current taken from the full-adder inputs, besides the current provided from the power-supply. Post-layout simulations show that the proposed full-adders outperform its counterparts exhibiting an average PDP advantage of 80%, with only 40% of relative area.

CMOS Full-Adders for Energy-Efficient Arithmetic Applications

In this paper, a hybrid 1-bit full adder design employing both complementary metal–oxide–semiconductor (CMOS) logic and transmission gate logic is reported. The design was first implemented for 1 bit and then extended for 32 bit also. The circuit was implemented using Cadence Virtuoso tools in 180-and 90-nm technology. Performance parameters such as power, delay, and layout area were compared with the existing designs such as complementary pass-transistor logic, transmission gate adder, transmission function adder, hybrid pass-logic with static CMOS output drive full adder, and so on. For 1.8-V supply at 180-nm technology, the average power consumption (4.1563 $\mu $ W) was found to be extremely low with moderately low delay (224 ps) resulting from the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. Corresponding values of the same were 1.17664 $\mu $ W and 91.3 ps at 90-nm technology operating at 1.2-V supply voltage. The design was further extended for implementing 32-bit full adder also, and was found to be working efficiently with only 5.578-ns (2.45-ns) delay and 112.79- $\mu $ W (53.36- $\mu $ W) power at 180-nm (90-nm) technology for 1.8-V (1.2-V) supply voltage. In comparison with the existing full adder designs, the present implementation was found to offer significant improvement in terms of power and speed.

Performance Analysis of a Low-Power High-Speed Hybrid 1-bit Full Adder Circuit

A performance analysis of 1-bit full-adder cell is presented. The adder cell is anatomized into smaller modules. The modules are studied and evaluated extensively. Several designs of each of them are developed, prototyped, simulated and analyzed. Twenty different 1-bit full-adder cells are constructed (most of them are novel circuits) by connecting combinations of different designs of these modules. Each of these cells exhibits different power consumption, speed, area, and driving capability figures. Two realistic circuit structures that include adder cells are used for simulation. A library of full-adder cells is developed and presented to the circuit designers to pick the full-adder cell that satisfies their specific applications.

T.K. Darwish

Papers

Performance analysis of low-power 1-bit CMOS full adder cells