Over the past 25 years, organic field-effect transistors (OFETs) have witnessed impressive improvements in materials performance by 3–4 orders of magnitude, and many of the key materials discoveries have been published in Advanced Materials. This includes some of the most recent demonstrations of organic field-effect transistors with performance that clearly exceeds that of benchmark amorphous silicon-based devices. In this article, state-of-the-art in OFETs are reviewed in light of requirements for demanding future applications, in particular active-matrix addressing for flexible organic light-emitting diode (OLED) displays. An overview is provided over both small molecule and conjugated polymer materials for which field-effect mobilities exceeding > 1 cm2 V–1 s–1 have been reported. Current understanding is also reviewed of their charge transport physics that allows reaching such unexpectedly high mobilities in these weakly van der Waals bonded and structurally comparatively disordered materials with a view towards understanding the potential for further improvement in performance in the future.

/pdf/25th-anniversary-article-organic-field-effect-transistors-56cmlfirhg.pdf

25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon.

Printing electronic devices using semiconducting 'ink' is seen as a promising route to cheap, large-area and flexible electronics, but the performance of such devices suffers from the relatively poor crystallinity of the printed material. Hiromi Minemawari and colleagues have developed an inkjet-based printing technique involving controlled mixing on a surface of two solutions — the semiconductor (C8-BTBT) in its solvent and a liquid in which the semiconductor is insoluble. The products of this antisolvent crystallization technique are thin semiconductor films with exceptionally high and uniform crystallinity. The use of single crystals has been fundamental to the development of semiconductor microelectronics and solid-state science1. Whether based on inorganic2,3,4,5 or organic6,7,8 materials, the devices that show the highest performance rely on single-crystal interfaces, with their nearly perfect translational symmetry and exceptionally high chemical purity. Attention has recently been focused on developing simple ways of producing electronic devices by means of printing technologies. ‘Printed electronics’ is being explored for the manufacture of large-area and flexible electronic devices by the patterned application of functional inks containing soluble or dispersed semiconducting materials9,10,11. However, because of the strong self-organizing tendency of the deposited materials12,13, the production of semiconducting thin films of high crystallinity (indispensable for realizing high carrier mobility) may be incompatible with conventional printing processes. Here we develop a method that combines the technique of antisolvent crystallization14 with inkjet printing to produce organic semiconducting thin films of high crystallinity. Specifically, we show that mixing fine droplets of an antisolvent and a solution of an active semiconducting component within a confined area on an amorphous substrate can trigger the controlled formation of exceptionally uniform single-crystal or polycrystalline thin films that grow at the liquid–air interfaces. Using this approach, we have printed single crystals of the organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) (ref. 15), yielding thin-film transistors with average carrier mobilities as high as 16.4 cm2 V−1 s−1. This printing technique constitutes a major step towards the use of high-performance single-crystal semiconductor devices for large-area and flexible electronics applications.

Inkjet printing of single-crystal films

The past couple of years have witnessed a remarkable burst in the development of organic field-effect transistors (OFETs), with a number of organic semiconductors surpassing the benchmark mobility of 10 cm2/(V s). In this perspective, we highlight some of the major milestones along the way to provide a historical view of OFET development, introduce the integrated molecular design concepts and process engineering approaches that lead to the current success, and identify the challenges ahead to make OFETs applicable in real applications.

Integrated materials design of organic semiconductors for field-effect transistors

One of the advantages of organic over inorganic semiconductors is they can be grown from solution, but their electrical mobility is often poor. Yuan et al. report a technique for fabricating organic transistors with mobilities far beyond that of amorphous silicon and close to that of polycrystalline silicon.

/pdf/ultra-high-mobility-transparent-organic-thin-film-4csee58y23.pdf

Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

Organic Optoelectronic Materials: Mechanisms and Applications

Very high-mobility organic transistors are fabricated with purified rubrene single crystals and high-density organosilane self-assembled monolayers. The interface with minimized surface levels allows carriers to distribute deep into the crystals by more than a few molecular layers under weak gate electric fields, so that the inner channel plays a significant part in the transfer performance. With the in-crystal carriers less affected by scattering mechanisms at the interface, the maximum transistor mobility reaches 18cm2∕Vs and the contact-free intrinsic mobility turned out to be 40cm2∕Vs as the result of four-terminal measurement. These are the highest values ever reported for organic transistors.

Very high-mobility organic single-crystal transistors with in-crystal conduction channels

High-mobility organic transistors are fabricated on both surfaces of approximately 1-μm-thick rubrene crystals, molecularly flat over an area of 10×10μm2. A thin platelet of 9,10-diphenylanthracene single crystal and surface-passivated SiO2 are used for the gate insulators. Because of the minimized densities of hole-trapping levels at the interfaces and in the rubrene crystal, the field-induced carriers do not necessarily reside near the interface but are distributed in the bulk of the semiconductor by adjusting the two gate voltages. Making use of the highly mobile carriers in the inner crystal, the mobility is maximized to ∼43cm2∕Vs.

T. Kawase

Papers

Very high-mobility organic single-crystal transistors with in-crystal conduction channels

High-mobility double-gate organic single-crystal transistors with organic crystal gate insulators